R32Dragon
11-17-2007, 01:13 AM
Here are some pics of my latest project.
Converting my USDM Z32 tail lights to JDM-spec.
The "Before" shot
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0009.jpg
MMmmm.....smells good.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0068.jpg
Let the prying begin
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0069.jpg
Tossed out the old orange crap, and popped in the clear goodness.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0074.jpg
Pinstripping the inside of the of the lense
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0075.jpg
Painting away the marks I made will prying the tail light apart
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0076.jpg
Sandwiched back together
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0077.jpg
Back on the stove
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0066.jpg
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0067.jpg
Now thats it been put back together and cooled off, I wetsand the imperfections outta it.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0071.jpg
Polish. PlastiX is gud ****.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0072.jpg
Viola! One down, one more to go.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0073.jpg
Now done. This took 4 hrs.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0079.jpg
My Z with USDM tails
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0031.jpg
Now with the ones I just made in my kitchen, big diff eh?
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0080.jpg
Real JDM tails
http://i231.photobucket.com/albums/ee228/R32Dragon/imagemagic.jpg
Total cost (Including Pull-a-part tail lights)= 40$
Real ones= 495$
PM me if you want more detailed instructions on the project.
Converting my USDM Z32 tail lights to JDM-spec.
The "Before" shot
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0009.jpg
MMmmm.....smells good.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0068.jpg
Let the prying begin
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0069.jpg
Tossed out the old orange crap, and popped in the clear goodness.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0074.jpg
Pinstripping the inside of the of the lense
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0075.jpg
Painting away the marks I made will prying the tail light apart
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0076.jpg
Sandwiched back together
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0077.jpg
Back on the stove
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0066.jpg
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0067.jpg
Now thats it been put back together and cooled off, I wetsand the imperfections outta it.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0071.jpg
Polish. PlastiX is gud ****.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0072.jpg
Viola! One down, one more to go.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0073.jpg
Now done. This took 4 hrs.
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0079.jpg
My Z with USDM tails
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0031.jpg
Now with the ones I just made in my kitchen, big diff eh?
http://i231.photobucket.com/albums/ee228/R32Dragon/SSPX0080.jpg
Real JDM tails
http://i231.photobucket.com/albums/ee228/R32Dragon/imagemagic.jpg
Total cost (Including Pull-a-part tail lights)= 40$
Real ones= 495$
PM me if you want more detailed instructions on the project.