PDA

View Full Version : bypass switch on an indash


The BUCKY
11-14-2007, 05:30 PM
:goodjob: maybe some of the installers here can help. trying to hook up a bypass switch on alpine D900 into an 04 jeep grand cherokee. anyone with some help :goodjob:
SRCRX
11-14-2007, 06:55 PM
PAC, makes a by-pass for the alpines, I only sell panasonic, so not much help!!

You know anyone up at Traffic Jams?? thats around you isn't it??
green91
11-14-2007, 07:42 PM
Use the PAC kit for the d900.. ive used a few of them with great sucess..

http://cgi.ebay.com/Pac-TR-7-TR7-Alpine-Video-Bypass-IVA-D300-IVA-D900-D901_W0QQitemZ170167598175QQihZ007QQcategoryZ67771 QQcmdZViewItem
JDMef88
11-15-2007, 12:53 AM
yo bucky try traffic jams its like 15 mins from your house they should do the trick
Init2winit
11-15-2007, 11:35 AM
Read the instructions maybe?
The BUCKY
11-15-2007, 12:01 PM
Read the instructions maybe?


:2up: its not gonna tell you how to bypass a safety feature
keevo54
11-15-2007, 12:06 PM
Just run the wire that should go to the parking brake to a ground and install a switch before the ground. The switch will act as the parking brake.
FAHHQUE700
11-15-2007, 07:25 PM
Just run the wire that should go to the parking brake to a ground and install a switch before the ground. The switch will act as the parking brake.

damn smart guy! It's not that hard..... rep for joooo :goodjob:
redgst97
11-15-2007, 09:25 PM
PAC TR7 FTW!!!
Ol' Gregg
11-15-2007, 09:29 PM
Read the instructions maybe?



hahahahahahahahahahhaahahahahahaha your soo funny!!!!
dnugs03rsx
11-15-2007, 11:10 PM
tiss easy first ya go buy a switch from ace or home depot etc. i think its around $5-8 then ya get ur grounding wire hook it up i put mine down where the gas tank pull thingy is then u ground it somewhere kinda ghetto now but im gonna make a thread sooner or later on how i did it works like a charm always works wit two clicks
YokotaS13
11-16-2007, 12:46 AM
your an idiot
^^

**** a switch
ground it
keevo54
11-16-2007, 07:33 AM
your an idiot
^^

**** a switch
ground it

:rolleyes: If you just ground it then it will never play video on the move.
SOHC MONSTER
11-18-2007, 06:20 PM
The cheap easy way is to hook up the brake switch wire to the brake wire in the vehicle then use a toggle to trigger the parking brake wire on the alpine with a ground. simple fix but just go get the pac piece... its so much easier :goodjob:



:rolleyes: If you just ground it then it will never play video on the move.
YokotaS13
11-20-2007, 05:49 PM
:rolleyes: If you just ground it then it will never play video on the move.
pioneer does so does clarion
i haev both
The BUCKY
11-20-2007, 06:01 PM
i just grounded it through a switch and got it to work
madwick
11-21-2007, 09:01 AM
come on mike, just call me next time.

and you know this, MAN!!!
blackboi50
11-21-2007, 09:06 AM
i just grounded it through a switch and got it to work

yup thats how my alpine works!!!!!!!!:goodjob:...........1
Dracc
11-21-2007, 10:40 AM
i just grounded it through a switch and got it to work



congrats.. enjoy....:ninja:
sina518
11-21-2007, 11:38 AM
not every unit can be bypassed by grounding it. the newer alpine and the d-310 require a tr-7, some of the jensen,dual, clarion, and valor need a switch. and kenwood, panasonic, older alpine, eclipse, jvc etc.. can be grounded