bluuuurr
11-13-2007, 09:58 AM
I'm just going to think of everything I can before I can get to a digi camera tommorow. Car will be sold as it sits, non-running, but anyone with a little bit of time can get this car running without too much trouble at all.
I dropped another motor in it with unknown mileage (looks very clean), but I don't have the time or money to tune it. Nor would I have time/money to race it when I finished.
Parts-
-HKS Coilovers in the front 850lb springs
-Tein NA Coilovers in the rear 600lb springs, these need to be re-valved
-Bride Bucket Seat
-HKS Hi-Power Exhaust
-Fluidyne Aluminum Radiator
-15x7 Elite 5-Star Wheels, +10 offset
-JDM Silvia K's Front End conversion (one corner light has a broken bracket, but I had it zip tied in and it didn't move an inch)
Energy Suspension Master bushing set (didn't finish getting this one installed)
-Summit Racing Overflow Can
-Autometer Water/Boost Gauges
Details-
*Car is completely gutted*
-no radio
-sound insulation is removed up to driver/passenger seat (needs to be cleaned up alot, never really finished this job)
I'll include all interior peices if wanted
-Radiator Support is slightly bent from a fender bender by a previous owner, I have a complete replacement unit I'll include for no extra charge. this is really a cosmetic thing and causes no structural damage
Spare Parts-
I have several extra front end suspension peices.
I have a spare block I'll throw in if buyer agrees to purchase at full price
I have a spare head that has been cleaned and milled profesionally (after a previous head gasket incident)
Felpro Full Gasket Kit which hasn't been opened.
Enjuku 3 Peice Aero Spoiler
and I have an entire storage room full of parts the buyer can root through, otherwise, it'll probably go to the junkyard.
Reason why I'm selling-
I'm getting married, I'm moving out of state, and I haven't had time to really mess with the car in 6 months.
The car does not run as it sits, but there is a motor in it which does turn over. I'd say a good weekend of tinkering with it could have it running.
http://img.photobucket.com/albums/v383/bluuuurr/MVC-014S.jpg
random pic of motor and trany before I dropped it in
http://img.photobucket.com/albums/v383/bluuuurr/avatar.jpg
http://img.photobucket.com/albums/v383/bluuuurr/MVC-038S.jpg
http://img.photobucket.com/albums/v383/bluuuurr/MVC-043S.jpg
http://img.photobucket.com/albums/v383/bluuuurr/MVC-035S.jpg
some spare front end peices
http://img.photobucket.com/albums/v383/bluuuurr/MVC-016S-1.jpg
sorry for the briefness, i'm in a hurry on the way to work.. ask any questions here, i'll be glad to answer, and i'll have some newer pics soon
I'm asking 2,300.. price is pretty much firm unless you want me to keep some parts.. but offer away
I dropped another motor in it with unknown mileage (looks very clean), but I don't have the time or money to tune it. Nor would I have time/money to race it when I finished.
Parts-
-HKS Coilovers in the front 850lb springs
-Tein NA Coilovers in the rear 600lb springs, these need to be re-valved
-Bride Bucket Seat
-HKS Hi-Power Exhaust
-Fluidyne Aluminum Radiator
-15x7 Elite 5-Star Wheels, +10 offset
-JDM Silvia K's Front End conversion (one corner light has a broken bracket, but I had it zip tied in and it didn't move an inch)
Energy Suspension Master bushing set (didn't finish getting this one installed)
-Summit Racing Overflow Can
-Autometer Water/Boost Gauges
Details-
*Car is completely gutted*
-no radio
-sound insulation is removed up to driver/passenger seat (needs to be cleaned up alot, never really finished this job)
I'll include all interior peices if wanted
-Radiator Support is slightly bent from a fender bender by a previous owner, I have a complete replacement unit I'll include for no extra charge. this is really a cosmetic thing and causes no structural damage
Spare Parts-
I have several extra front end suspension peices.
I have a spare block I'll throw in if buyer agrees to purchase at full price
I have a spare head that has been cleaned and milled profesionally (after a previous head gasket incident)
Felpro Full Gasket Kit which hasn't been opened.
Enjuku 3 Peice Aero Spoiler
and I have an entire storage room full of parts the buyer can root through, otherwise, it'll probably go to the junkyard.
Reason why I'm selling-
I'm getting married, I'm moving out of state, and I haven't had time to really mess with the car in 6 months.
The car does not run as it sits, but there is a motor in it which does turn over. I'd say a good weekend of tinkering with it could have it running.
http://img.photobucket.com/albums/v383/bluuuurr/MVC-014S.jpg
random pic of motor and trany before I dropped it in
http://img.photobucket.com/albums/v383/bluuuurr/avatar.jpg
http://img.photobucket.com/albums/v383/bluuuurr/MVC-038S.jpg
http://img.photobucket.com/albums/v383/bluuuurr/MVC-043S.jpg
http://img.photobucket.com/albums/v383/bluuuurr/MVC-035S.jpg
some spare front end peices
http://img.photobucket.com/albums/v383/bluuuurr/MVC-016S-1.jpg
sorry for the briefness, i'm in a hurry on the way to work.. ask any questions here, i'll be glad to answer, and i'll have some newer pics soon
I'm asking 2,300.. price is pretty much firm unless you want me to keep some parts.. but offer away