PDA

View Full Version : b16... gsr....


b16ftw
11-08-2007, 07:27 PM
does any body know if you can use a gsr wiring harness with a b16?
b16ftw
11-08-2007, 08:00 PM
come on now... anybody?
iNsTuN nOoDoH
11-08-2007, 08:06 PM
possible. depends on obd's of the motor and harness.
b16ftw
11-08-2007, 08:10 PM
well obviously i'd get an obd1 for my obd1 motor... i'm trying to find out about the difference between an obd1 gsr harness and an obd1 b16 harness if there is any.
Barefoot
11-08-2007, 08:24 PM
yes u can hell u can use a d series vtec harness on it.
b16ftw
11-08-2007, 08:28 PM
yes u can hell u can use a d series vtec harness on it.

oh really? ok thanks.
iNsTuN nOoDoH
11-08-2007, 09:43 PM
Not 100% sure, but you might throw a code for the IAB that the gsr runs. Unless you run a b16 ecu...
Barefoot
11-08-2007, 11:27 PM
Not 100% sure, but you might throw a code for the IAB that the gsr runs. Unless you run a b16 ecu...
ive always run a chipped/socketed p28 or p75 so i know he wont get a code with those.
Grimm Reeper
11-12-2007, 06:53 AM
Checking the wires and plugging it into the ecu, you can use a GSR harness on a SI, but I believe that it must be the same OBD though.
AMD_Civic
11-12-2007, 12:07 PM
YES SIRE...