2jz powered PLYMOUTH PROWLER

[SL33P3R]

Saw this on supraforums and thought it was pretty badass....a little swap that Titan Motorsports is taking on... Owner went with the th400 tranny on the setup.


http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/IMG_5531.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/IMG_5532.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/IMG_5533.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/IMG_5538.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/IMG_5539.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08415.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08417.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08418.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08522.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08523.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08524.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08537.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08539.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08540.jpg
http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/Prowlers1.jpg[/QUOTE]

[NAIZBST]

nice

[OneSlow5pt0]

not the swap i would have done..........but great seeing one my fav cars having some bite

[iEvo]

thoes r some sick motor mounts! that should be a pretty bada$$ car when its done

[Vteckidd]

10 bucks says it does wheelstands

[BTLFED]

The Civette will beat it.

[VooDooXII]

YES! AWESOME!

By the way...this welding is beautiful. Never thought it could be so artistic...

http://i44.photobucket.com/albums/f15/2jzmk3/Customer%20Cars/Prowler/DSC08539.jpg

[Repost Squintz]

The Civette will beat it.
truth

[OneSlow5pt0]

prowler needs a hemi though...not a 2jz

[The Ren]

thats crazy

[DUBSf22c]

i would have to say that prowler is a waster.. they should have used an old hot rod

[VooDooXII]

I hope they invested in some chassis reenforcement too...I don't think the Prowler had a very solid platform.

[Deke]

Awesome. My only gripe with the prowler is how under powered it is. I'm glad someone is taking care of it.

[OG-Skinny]

10 bucks says it does wheelstands

100 bucks says it cost the customer over 20K

[VooDooXII]

Underpowered and no manual transmission...

[OneSlow5pt0]

100 bucks says it cost the customer over 20K

plus over 40k for the car in first place

[DeeAOne]

well chances are if they have a car and a motor like those just sitting around they dont have to worry about money. haha

[WalkS]

prowler needs a hemi though...not a 2jz
Ain't that the truth. It need a real 426 Hemi, not that new B.S Hemi.

[BKgen®]

those motor mounts are SICK!

nice to see someone modding a Prowler like this after years of not hearing sh*t about Prowlers lol.

[TallGuy]

just like everyone els said those mounts are amazing..

[Evil Goat]

damn...too bad they picked the ugliest pos ever made to put it in

[OneSlow5pt0]

damn...too bad they picked the ugliest pos ever made to put it in

and u drive a grand prix..........least prowlers dare to be different

[The BUCKY]

that thing has always needed some balls and from the look of it a big hemi prob wouldnt have fit

[Sol-Badguy]

The Civette will beat it.
The black one at Nopi?

Meeting those guys in Kennesaw was great. We screwed with so many cars that came into the parking lot.

[Big Baller]

Thats ****ing cool

[SL33P3R]

Yeah, I just thought it was cool. I havent seen it done before so i thought I would post it. Titan said they know they have ALOT of fabrication ahead but they are down for the work!

[Elbow]

Cool swap, unique ftw

[Deke]

damn...too bad they picked the ugliest pos ever made to put it in

You're crazy man :screwy:

[admedlin]

wow looks like some solid mounts. it'll probably need them.

definitely a badass looking car, can't wait to see it finished

[The Yousef]

oh my holy bad arse!

[Alan®]

Yeah, I just thought it was cool. I havent seen it done before so i thought I would post it. Titan said they know they have ALOT of fabrication ahead but they are down for the work!
so long as they get paid i bet they are.

with as tight of space as they are working in, where the hell are they gonna stick a intercooler. :thinking: the radiator is sitting where the shocks mount up as is and the nose only gets smaller. they could do like what the audi tts have and do a dual smic setup

[fatman169]

damn things people do with a little extra money

[Evil Goat]

and u drive a grand prix..........least prowlers dare to be different


when you dont have a valid point on a car based forum its often easier to try to take a stab at someone elses car....which just shows your ignorance....its too bad we cant all have an uber elite celica :blah:

prowlers were yet another weak attempt to revive the plymouth nameplate, and to put out something decent, they failed. hell they didnt even release a 98 b/c the 97's sucked so much balls w/ that mad 215hp, and then tried to attempt it again in late 98, with what? gay auto stick manual shift? :lmfao: and even after they redid the suspension on those pos' they still rode like balls, handled like balls, and still were underpowered with the 300m 250hp v6....i mean seriously, youre gonna produce a car that looks like that and stick a family car motor in it? +1 for dodge

the prowler was designed for a yuppie going through a mid life crisis, much like the pt cruiser, who is looking for people to look at him at red lights....ask any prowler owner why they like the car so much and i can gurantee one of the first 2 things to come out of his mouth will be the amount of looks they get in the car....they just dont realize people are laughing inside b/c they got duped into yet another marvelous dodge product

[VooDooXII]

They didn't make the Prowler with a 215 bhp engine. The 3.5 Liter V6 was the only engine released for it.

I love the Prowler. I think it's extremely stylish. Their biggest problem was bad build quality, and as you and I mentioned...grossly underpowered with no manual transmission available.

Hypno...don't wreck on the GTO! :D

[Evil Goat]

they sure did, 97's came with an advertised 214hp, it wasnt until they rerelased the car in late 98 that it came w/ the engine shared w/ the 300m and something else, that made 250 hp

[VooDooXII]

they sure did, 97's came with an advertised 214hp, it wasnt until they rerelased the car in late 98 that it came w/ the engine shared w/ the 300m and something else, that made 250 hp

Hmm...I'm going to go look it up. That doesn't sound right to me.

EDIT: Never mind...you're right. Hah, I had no idea.

[SL33P3R]

Either way the look of the car is unique. It may have an extremely under powered engine, but this one will be packing a 2j, so this one should have some go in it

[Evil Goat]

ehhh.....i dont know why i remember that, b/c i hate the car, maybe it was b/c the first one i ever saw the guy was flaunting the fact that it had "200+ hp"

[Evil Goat]

Either way the look of the car is unique. It may have an extremely under powered engine, but this one will be packing a 2j, so this one should have some go in it


very true, ill admit the styling, for the late 90's, was radical, just wasnt my taste then, and i laugh every time i see one now....this one on the other hand....gets me back to my roots......."ill drive anything as long as its fast"

[Da_unknown]

now thats a freakin project...

[HachiDori]

Those welds are delicious!!! umm...

[BamzRexsi90]

i always said that they needed a better motor.

[2turbo4u]

Didn't someone throw a V10 Viper motor in one?

[FDslider]

I know the welds are BEAUTIFUL, but I wonder if the aluminum will hold up with all of the torque. We'll see....

[khailon]

nice

[Brown Man]

wow

[magneto198]

wow, looks good, cant wait to see the finished project

[ttman]

a big haulking V8 won't fit in the tapered V shaped Prowler engine bay. hence the 2jzgte.