the real i took your advice 90 ZC Hatch

[JDMJAYDC2]

in respect of 90 ZC Hatch i present my latest purchase for my hatch picked them up yesterday for 75!!!! so effin clean its crazy anyhow enjoy the pics

http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00114.jpg

[SL65AMG]

very nice man. i need some. mine are pretty trashed.





lol wanna donate a set of wheels to me, jesus man. lol

[EvasiveEF9]

Holy crap, who's got the wheels?

[JDMJAYDC2]

heheh yeah my garage is a nice little setup you should see my closet upstairs i have my sn for a reason but i will post up the updated pics of my dc seat swap

[JDMJAYDC2]

http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00124.jpg first seat out

all installed!
http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00125.jpg

outside shot i know i need a new winshield!

http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00126.jpg

i would like to thank alan for making me want to take on this project, ben and rocky at the shop and mark for the use of the tools if anyone is trying to figure out if they should do this i say do it the seats are so damn comfortable!!

[EvasiveEF9]

LoL...Randy? You mean Rocky?

[JDMJAYDC2]

it does say rocky mr no shirt!

[EvasiveEF9]

..cheater.

[JDMJAYDC2]

sshhhhhh!!!!

[JDMJAYDC2]

what no love from 90 zc hatch i guess cause i dont have the center console i get no love dammit!

[Cato ED-6]

ya, get a GSR center and its complete.

[Whiteboy™]

lol, you ****ing whores

[Papa_Smurf]

what no love from 90 zc hatch i guess cause i dont have the center console i get no love dammit!

lol my b, i've been out of town the last few days.

seats look great, you got a better deal than i did! Just get the gsr center colsole and you'll be set.

so they eren't too hard to install, right? 3 out of 4 bolts lined up for me, and then i "made" the 4th one fit.

[JDMJAYDC2]

im leaning more towards type r center console i have a typr rx one already for my teg

[JDMJAYDC2]

well this by far will make you so mad its not funny lol i think mine are better than yours with the help of the shop guys the three lined up sorta but what we did is line up each one and the rear one we took the bracket and used a air compressed dremmel tool and made the hole on the seat bracket large enough to clear the original hole in the floor board. Then we removed the seat and rethread the holes in the floor board for a oem fit so know my hatch is able to fit ef stock seats as well as eg or dc seats with no mods needed!! they feel so damn good alan you wouldnt belive it im going to put in my type rx center console instead of the regular gsr one im still undecided on it ive been pretty busy with the teg and working on my windows media player for my car

[Papa_Smurf]

well this by far will make you so mad its not funny lol i think mine are better than yours with the help of the shop guys the three lined up sorta but what we did is line up each one and the rear one we took the bracket and used a air compressed dremmel tool and made the hole on the seat bracket large enough to clear the original hole in the floor board.

we did the same, made the hole on the braket bigger.


Then we removed the seat and rethread the holes in the floor board for a oem fit so know my hatch is able to fit ef stock seats as well as eg or dc seats with no mods needed!!

you re-threaded the holes, or made a new hole? i hope you didn't just make a new hole(s)...


they feel so damn good alan you wouldnt belive it

i would imagine i know how comfortable they feel, seeing as how i have a set of my own ;)


im going to put in my type rx center console instead of the regular gsr one

show me the difference between a typre rx and a gsr center console.

__________________________________________________ __________________

....start using complete sentences with correct periods and stuff man, you're making it tough to talk to you :lmfao:

[JDMJAYDC2]

look punk! im laying down on my couch, throwing the ball with the dog.
talking to 3 ppl on yahoo ims and reading on team-integra at the same time.

ok well we did the same thing then made the holes bigger.

and no i dont have two sets of holes just the oem ones

i appologize then to the great 90 ZC hatch for my grammar mistakes

[Papa_Smurf]

i appologize then to the great 90 ZC hatch for my grammar mistakes

haha, i was just fucckin w/ ya homie!

anyway, when you get a chance, let me see this console you plan on putting in.

[JDMJAYDC2]

its nothing special just a 98 jdm type rx console looks exactly the same as a type r one but has type rx on the center metal plate i paid way too much for it but not everyone has one so thats why i like it if i find another one ill let you know

[JDMJAYDC2]

UPDATED!! today courtsey of Li fron Vinh's body shop still have to clean them up and get a type r shift boot but im happy with them

http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00132.jpg
http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00133.jpg

[Papa_Smurf]

haha @ the dog bro

[JDMJAYDC2]

yeah she gets into everything shes so curious

[Cato ED-6]

Damn that console is dirty. Could he atleast wiped it off? Or is that something other than dust?

But none the less, GSR console FTW!!!

[JDMJAYDC2]

was in a junked integra sedan that had no doors on it so who knows what most of this crap is on it but for 40 bucks i aint complaining nothing a lil elbow grease wont fix

[Cato ED-6]

For 40 bucks i aint complaining nothing a lil elbow grease wont fix

Nice deal, I got mine for $60.

[AnTi-PooN]

weet i picked up my back seats yester day.. along with polk momo speakers and a new alpine headunit

[LIKEG6]

what seats fit?

I have sol del slo seats and some other eg seats and neither fit, too wide and the junkyard wants too much for stock ef's so I can use the brackets

[uproot]

lookin good! i need to get me some seats.... lol

[Papa_Smurf]

T2KU, what do ur del sol seats look like?

i might buy em from ya.

[JDMJAYDC2]

yeah alan they might look good if they are the ones with the blue stripe down the middle not my cup of tea though

[AnTi-PooN]

i had to weld the back of mine to fit but the front bolted right on

[Papa_Smurf]

yeah alan they might look good if they are the ones with the blue stripe down the middle not my cup of tea though

i've never liked the look of the del sol seat, but i sat in my buddy's EG and he had sum.... they are super, super comfortable. wrap around you like a damn racing seat. his were sum dark grey/black back with a grey stripe up the middle.

[JDMJAYDC2]

ok after all of my hardwork today with a S.O.S pad and dial liquid soap i give you the finished project just waiting on my skunk2 shiftknob and my jdm itr shift boot to come in the mail this week and ill be done with the center console project for my hatch

http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00155.jpg
http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00156.jpg

what i used to get it to shine because when i got finished cleaning it with the S.O.S pad it was a white blue hazy color

http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00157.jpg

[JDMJAYDC2]

and no dog pics per alans request! lol

[LIKEG6]

they have a blue stripe
They are really comfortable, so I want to keep them but jus gotta find some stock ones to change out the brackets

[Papa_Smurf]

and no dog pics per alans request! lol

i wanna see the dog inside the arm rest, closed :D

[JDMJAYDC2]

i tried to put her in there but she's too big now mabye last year when i first got her she would have but on to the update just in today!!! yay im getting excited to put it in the car waiting on the shift knob now

http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00159.jpg
http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00160.jpg

[JDMJAYDC2]

after seeing this pic i realized i have some more cleaning to do it should be totally clean before i install it!!

[Papa_Smurf]

looks sick jermaine.

it's gonna look nice installed, espically w/ them gsr seats homie.

[JDMJAYDC2]

yeah im hoping it will look nice i will prolly start painting the dash once i get my teg back from ben's shop black int FTW!

[EvasiveEF9]

Jermaine is one of few that I can say is doing their car's nice and right...

[Papa_Smurf]

is my car not in the process of being nice and right?

or will that come when i get a B? lol

[JDMJAYDC2]

ok so after rushing home after work to beat traffic and catch the ups guy i bring you another update to my car



http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00179.jpg
http://i213.photobucket.com/albums/cc146/JDMJAYDC2/DSC00181.jpg


i love this friggin thing it is a bit heavy though i will say that cant wait to install it tomorrow morning more updates to follow

[Cato ED-6]

Don't you have a 4spd?

[JDMJAYDC2]

Don't you have a 4spd?

yeah but not for long:ninja: i might be buying allittle dose of VTEC if things go my way soon but if not ill have a 5 spd when i do the swap so thats why i bought it now

[EvasiveEF9]

is my car not in the process of being nice and right?

or will that come when i get a B? lol
...your....car's...in progress of being something? :lmfao:

[JDMJAYDC2]

yeah mr low blow!!! it is in the process of being better than when i started with it sorry we all cant drop 7k on a paint job so yeah a skunk 2 shift knob is gonna hold me over for a while. did amy ever come back to the shop last night?

[Papa_Smurf]

...your....car's...in progress of being something? :lmfao:

lol, limited funding FTL. i'm starting to realize that i want to go to a 4 year school instead of gwinnett tech's 2 year program, and if i transfer i'ma need alot more money....