Log in

View Full Version : Volvo



wbhard3029
10-28-2007, 04:35 PM
anybody who rocks the bricks!!

mike's02ls1
10-29-2007, 06:39 PM
89 740 wagon....

wbhard3029
10-29-2007, 07:13 PM
any mods?

mike's02ls1
10-29-2007, 08:46 PM
any mods?
Nothing at the moment, looking to do a 16v swap with a 5spd swap, and a nice GT35R turbo on a built motor.

blackshine007
10-29-2007, 08:55 PM
There's quite a couple of Volvo guys here. PM superboost and ask him what he's got. But to not alienate him, tell him what you got

Boosted S60R
10-29-2007, 10:21 PM
anybody who rocks the bricks!!I have a 95 volvo T5R.
my mods on the car consist of
Intake
3" Downpipe
3" Turbo Back Exhaust
Ipd Stage 3 ecu
Reverse Intercooler Piping
KKK24 Turbo Charger (S60R Stock Turbo)

http://i18.photobucket.com/albums/b123/mike625939/Mikey%20Pics/Picture099.jpg
http://i18.photobucket.com/albums/b123/mike625939/Mikey%20Pics/Picture110.jpg
http://i18.photobucket.com/albums/b123/mike625939/Mikey%20Pics/Picture111.jpg

here are some pics of my S60R.
my mods so far include.
sam intake
rc eng 750cc injectors
walbro 255 fuel pump
aeromotive fuel pressure regulator
hks racing typeII blow off valve
1 set of VMS connecting rods
1 set of ross pistons 8.2 to 1 compression ratio
1 Fully machined crankshaft
1 set of chrome moly performance rings
1 set of performance rod bearings
1 set of performance main bearings
1 new oil pump
1 new water pump
1 timing belt
1 complete set of cryo treated valve springs
1 fully ported and polish performance cylinder head
1 set of ARP head studs,nuts and washers
We do all of the machining such as boring,honing,balancing the rotating
assembly,adjust valve timing for optimal performance,check and resureface
deck of engine block and cylinder head. pressure test cylinder head.
Garrett Gt35R
Tial 44mm external wastegate
4" down pipe
4" cat back exhaust
Spearco Front Mount Intercooler
Apexi Avc-r Boost Controller
Random Tech Race cat
Nitrous Express wet kit Adjustable from 35-150 shot
Intercooler Spray Bar
Fully Built transmission soon
Drive Shaft Shop Stage 5 axles- soon
Drive Shaft Shop stage 5 Drive shaft soon
External TRanny oil cooler
Evolve Body Kit
Evolve Springs
Kvr Upgraded Brake Rotors
19" Iforged Wheels
TOYO PROXES T1-R 235/35/19
Color Matched Headlights
Color Matched Taillights
Color Matched Side MoldINGS
TURBO DAVE TUBULAR EXHAUST MANIFOLD
Pioneer Avic-Z1
Qsd-216
2-Pce-216
2-jl300/4
2-jl500/1
2-12w6v2d4
4-Alumapro 5 Farad caps
Duel FiberGlassed A-pillars
Suede Headliner
Suede B and C pillars
Evolve upper engine bushing
Autometer Cobalt boost, air fuel, exhaust temp, 2 nitrous, and oil temp guages
unorthodox under drive pulley
vst strut brace
vst coil pack upgrade


http://i18.photobucket.com/albums/b123/mike625939/Mikey%20Pics/Picture103.jpg
http://i18.photobucket.com/albums/b123/mike625939/Mikey%20Pics/PICT0233.jpg
http://i18.photobucket.com/albums/b123/mike625939/Mikey%20Pics/PICT0231.jpg
http://i18.photobucket.com/albums/b123/mike625939/Mikey%20Pics/Picture084.jpg

wbhard3029
10-30-2007, 09:17 AM
id love to see that 850 in person....damn is hott

wbhard3029
10-30-2007, 06:57 PM
...hey you ever go on any mountian runs???

Boosted S60R
10-30-2007, 07:06 PM
...hey you ever go on any mountian runs???naw not usually when the S60R build is done then maybe but I am actually about to sell the 850 as I have upgraded daily drivers. but I do go out to the northpoint meets when they still have them.

wbhard3029
10-31-2007, 08:40 AM
ohhh really ...selling the 850...hmmmm......lol well you should come out for a mountain run...when is the next meet at northpoint?

wbhard3029
11-05-2007, 01:01 AM
ahh my radiator sprung a leak!! NOOOO

Goldvolvo240
11-05-2007, 01:14 PM
i have a gold "92 volvo 244...it was turbo but i rebuilt the engine. my fast car is now my black "83 volvo 244 glt. i have a boost controller (13 psi daily), turbo timer, upgraded fuel pump(walbro), added intercooler, 75 shot of nitrous into intercooler, 3" exhaust(not installed yet), b&g lowering springs, racing seats with full harnesses, and 17" adr competition wheels(black with polished lip). its been my project sense march...i should be pushing about 230 hp/ 250 tq without nitrous. we'll c on dyno day. megasquirt, brembo brakes, T5 transmission and lsd(3.73 rear end) are coming soon, im thinking of drifting it...ill post pics later.

Goldvolvo240
11-05-2007, 01:24 PM
Nothing at the moment, looking to do a 16v swap with a 5spd swap, and a nice GT35R turbo on a built motor.

i was thinking of doing something similar but 16v into my "83 244 then boost it with holset. good luck...post pics when ure done.

Boosted S60R
11-05-2007, 06:58 PM
ahh my radiator sprung a leak!! NOOOOewh that sucks I just put one in my 850 about 3 months ago. sucks!!!

wbhard3029
11-12-2007, 10:10 PM
yeah well i kinda got my radiator fixed, and went on a Mtn. Run...OMG!! I LOVE THIS S***!!!!

http://i104.photobucket.com/albums/m185/wbhard3029/DSCN1967.jpg

wbhard3029
11-16-2007, 11:54 AM
ballin!!

MikeJr.
12-02-2007, 05:13 PM
Here is my 92 245
http://www.pbase.com/mikejr/92_volvo_245_project
Its the feature car on this website
www.turbobricks.com

OnyxHatch
09-03-2009, 11:48 AM
A little on the late side...

Here's mine
87 740TI, M46 manual
http://i4.photobucket.com/albums/y134/greenhornet95/Volvo/DSCN1443.jpg

-Carlo

MikeJr.
09-05-2009, 10:02 AM
A little on the late side...

Here's mine
87 740TI, M46 manual
http://i4.photobucket.com/albums/y134/greenhornet95/Volvo/DSCN1443.jpg

-Carlo
Nice 740

boosted_nonv
10-17-2009, 10:18 PM
this is a clean 740

OnyxHatch
10-22-2009, 05:32 PM
this is a clean 740

Thanks, I sold it to a guy in Chattanooga about 3 weeks ago. Bought a 94 940 turbo sedan. It is a POS so it needs tons of work...but its happening

-Carlo

Sammich
10-22-2009, 05:34 PM
A little on the late side...

Here's mine
87 740TI, M46 manual
http://i4.photobucket.com/albums/y134/greenhornet95/Volvo/DSCN1443.jpg

-Carlo
THATS MAD HOT:goodjob:

volvo_c30
10-22-2009, 07:44 PM
i have a c30 that is under construction at the moment

mods to date:
IPD Front end links
Greddy protec B EBC
Custom 3' DP
evolve 3' CBE
ATP FMIC W/ custom hot and cold side piping w/ HKS SSQ BoV
Powerchip custom tune (thinking about dropping a unichip stand alone system for custom maps)
evolve intake pipe w/ K&N open intake combo
evolve anti sways
evolve springs
custom gauge cluster


coming soon: custom oil cooler, meth injection, re sleeve/new rods and pistons, GT35 and new injectors

Im looking to build a 242 but want to finish the c30 first

volvo_c30
10-22-2009, 07:47 PM
BTW there is a new shop just opened called VOLVOTISTA in lawrenceville, the owners are long time volvo enthusiasts and are hella cool guys...zeke and mike, they are looking to do new things to volvos that people wanna do but no one has parts for, so check them out

478 northdale road, suite 103 lawrenceville ga 30045

boosted_nonv
10-25-2009, 11:56 AM
ima have to check em out, this is good news

volvo_c30
10-25-2009, 02:54 PM
yeah good guys, they are gonna be doing some cool stuff, i was there the other day getting some stuff tweaked my car will be there all thanksgiving getting some new goodies should be pretty cool

boosted_nonv
10-25-2009, 10:32 PM
good stuff, keep us posted

volvo_c30
10-25-2009, 11:54 PM
aight bud will do, hey if u ever decide to go check the shop out lemme know ill head over and check out ur turbo brick, who knows could possibly be a volvo get together haha just last saturday there was 2 s60rs 1 v70r my c30 2 780's and a 850 it was quite the history montage haha oooh and there was a 242 chillin in the back

boosted_nonv
10-27-2009, 05:16 PM
ooooh snap:goodjob:

OnyxHatch
11-30-2009, 10:56 AM
aight bud will do, hey if u ever decide to go check the shop out lemme know ill head over and check out ur turbo brick, who knows could possibly be a volvo get together haha just last saturday there was 2 s60rs 1 v70r my c30 2 780's and a 850 it was quite the history montage haha oooh and there was a 242 chillin in the back

Got a volvo meet planned for Dec 13th if u guys are interested. So far, its going to be at Andretti's at 1pm.

And is Zeke the shaved head guy in a wheelchair? I know him from a while ago. he used to have a red 850r wagon that he traded for a Dakota R/T which he supercharged. Then sold & got a V70r I believe. He has i think 3-4 volvo's

-Carlo

yerrow
11-30-2009, 07:27 PM
thats zeke, i had his solver v70r and now he has the 850r, '04 flash green v70r, and '05 s60r

fivex684
12-01-2009, 08:20 PM
http://i45.photobucket.com/albums/f68/fivex84/The%20R/SDC10335.jpg
http://i45.photobucket.com/albums/f68/fivex84/The%20R/ESTStyleGrille001rs.jpg
http://i45.photobucket.com/albums/f68/fivex84/The%20R/006.jpg
http://i45.photobucket.com/albums/f68/fivex84/The%20R/003006ed.jpg

Performance
*16T Turbo
*Speedtuning 17psi Tune
*OBX Turbo Back Exhaust
*Samco Silicone Intercooler/Radiator Hoses
*Stylin Motors Silicone Vac Lines
*IPD Poly Trans Mount
*IPD Poly Torque Mount
*eBay MBC @ 18psi
*K&N Cone Filter
*Prosport Boost Gauge

Suspension
*IPD Springs
*Bilstein HD Shocks/Struts
*OBX Strut Bar

volvo_c30
12-02-2009, 08:43 PM
yeah zekes the owner, mike is his mechanic, they are awesome....ill see if they wanna roll down the 13th with me

BABY J
12-02-2009, 08:49 PM
I'm looking for a 240GT like this. I almost bought this exact one but the seller backed out of the deal and decided to keep it.

It's not as serious as me crashing the Volvo forums - but if you guys run across something keep me posted.

http://i165.photobucket.com/albums/u59/MUSIC_MAESTRO/15-1.jpg

volvo_c30
12-02-2009, 09:16 PM
god that is clean

BABY J
12-02-2009, 09:22 PM
Yeah - he was the orig owner... wanted 6k for it --- which I offered. He sent me detaield pics of engine and interior --- they simpy aren't this clean anymore.

volvo_c30
12-03-2009, 10:12 AM
man wish u had gotten ur hands on that one and turned it into a drift monster haha, i love the 240 but i can seem to get over the 780, its my love affair

fivex684
12-03-2009, 10:43 PM
Got my 302mm brake rotors, brackets and pads today.:D
http://i45.photobucket.com/albums/f68/fivex84/The%20R/002004.jpg

volvo_c30
12-04-2009, 11:49 AM
mmm sexeh, haha....you going to the andretti volvo meet thing??

fivex684
12-04-2009, 12:50 PM
Yeah I will be there. Set some money a side just for it.
Doubt the brakes will be on, I'm going to go ahead and paint the calipers (yellow) do a fluid flush (ATE Super Blue again) and thinking about ordering some stainless lines.

volvo_c30
12-04-2009, 03:48 PM
nice, are we gonna be racing at andretti like in the karts ooooor just chillin?

fivex684
12-04-2009, 09:18 PM
I don't know, I might.

volvo_c30
12-04-2009, 09:22 PM
aight, well looking forward to meeting everyone cya there

skeet
12-09-2009, 11:49 PM
rockin a 740 GL ( i need a front pass turn signal ).

OnyxHatch
12-14-2009, 08:53 AM
Had 7 cars show up, im sure more would have come if it wasn't for the rain...

http://i587.photobucket.com/albums/ss320/gcsanino/Volvo%20Stuff/12-133.jpg

You can see Skeet in the middle there...the one w/o the corner light =D

-Carlo

BABY J
12-14-2009, 09:20 AM
Man i gotta find a 240gt

volvo_c30
12-14-2009, 04:53 PM
ugh i couldnt make it had something come up

R_Rated
01-06-2010, 05:59 PM
S60R.... all stock

skeet
01-09-2010, 07:25 PM
I just got the turn sig today...

superboost
01-11-2010, 09:56 PM
http://i115.photobucket.com/albums/n312/racerx509/DSCN8860.jpg
its factory....

yes i know its ghetto

fivex684
01-11-2010, 10:44 PM
Not really what this thread is about but... I upgraded to the 12" front rotors from the 11" also painted my calipers and rotors and flushed with ATE Super Blue Racing fluid. Installed a "beefier" firewall mount over the weekend.
12" vs 11"...
http://i45.photobucket.com/albums/f68/fivex84/The%20R/3022003.jpg
Installed...
http://i45.photobucket.com/albums/f68/fivex84/The%20R/003004.jpg
Before... looked like ass.
http://i45.photobucket.com/albums/f68/fivex84/The%20R/302swap004.jpg
After...
http://i45.photobucket.com/albums/f68/fivex84/The%20R/302swap007.jpg
Firewall mount...
http://i45.photobucket.com/albums/f68/fivex84/The%20R/002001.jpg

superboost
01-11-2010, 10:56 PM
good deal on the brakes. Have you upgraded pads as well? I hear the EBC are nice on 850s. Also, I spy a stock IC piping arrangement. Why didn't you do the reverse IC piping?

fivex684
01-11-2010, 11:21 PM
I run PBR Metal Master pads. As for the rip kit, it doesn't really do anything but look better. I plan to get a fmic kit at some point.

superboost
01-11-2010, 11:30 PM
I run PBR Metal Master pads. As for the rip kit, it doesn't really do anything but look better. I plan to get a fmic kit at some point.

IC. Do they help? I too upgraded to some brembo rotors over the summer, but kept the stock pads. Did the metal pads eat the rotors up? I hear mixed messages on them.

fivex684
01-11-2010, 11:44 PM
My first set on Brembos lasted 3 years, not bad considering how drive the car at times. My only complaint is they are dusty as hell.

boosted_nonv
01-13-2010, 05:30 PM
http://i115.photobucket.com/albums/n312/racerx509/DSCN8860.jpg
its factory....

yes i know its ghetto

Dang your setup looks like Mark's hmmmm

fivex684
01-13-2010, 07:20 PM
Installed 8k 55watt hid's today.
http://i45.photobucket.com/albums/f68/fivex84/The%20R/hids002.jpg

yerrow
01-14-2010, 03:29 PM
boo for not retrofitting projectors

fivex684
01-14-2010, 03:47 PM
That response is the new Peg's.

yerrow
01-14-2010, 08:56 PM
yeah and volvo guys need to stop by pegs too and find a more unique wheel

fivex684
01-14-2010, 10:24 PM
Comets...lol

yerrow
01-14-2010, 11:29 PM
the tritons were the best optional stock wheels

on my old v70r
http://i6.photobucket.com/albums/y203/yerrow/house%20of%20wagons/IMG_1588.jpg

fivex684
01-14-2010, 11:40 PM
Agreed. I want a set of Tritons or the 17" version, I think they are called Propus.

fivex684
02-26-2010, 01:55 PM
Turbobricks meet at the Varsity on the 7th @ 1pm.
http://forums.turbobricks.com/showthread.php?t=197508