PDA

View Full Version : axels for a h22a swap in a ek??? help



gotrice?
10-28-2007, 10:36 AM
i bought this ek with a h22a swap from a friend but now when i turn left i get a real bad shaking from the left side.......when i accelerate its horrible.... what axles can i buy to put in here????? some one told me that da axles would work but i dont know.... help me out

AnclyT
10-28-2007, 04:08 PM
what kind of axles are you using? (what kind of combination?)
halfshaft?
which transmission?
what motor mounts?

gotrice?
10-28-2007, 08:08 PM
hasport motor mounts.. half shaft axle... i dont know much about the axles one of the guys told me that it had a da axle on the drivers side....but really dont know...

gotrice?
10-28-2007, 08:11 PM
the driveline angle is horrible because its so low..... any suggestions on axles??? i need help pretty quick.

Turbodude06
10-28-2007, 09:05 PM
Take it out and take it to the parts store and start comparing them to other honda's you'll have to find one sooner or later if no one knows just my :2cents: good luck:goodjob:

AnclyT
10-28-2007, 09:14 PM
if you have a regular h22 tranny, you can use the 86-89 integra axles with h22 inners


if you have the LSD m2b4 tranny, you'll need custom axles made (hasport/dss/etc)

gotrice?
10-29-2007, 06:33 PM
thanks for ur help bro the 93 da axles fit perfect...... back on the road.... u wouldnt happen to have some ek parts layin around would u????