PDA

View Full Version : Oil Leak



CraigMW
10-26-2007, 10:49 AM
Whats everybody! If anyone could help me... i would really appreciate it... I drive a 00 civic Si and i noticed the other day that i have oil leaking from between the head and block on the left side! How serious is this and is there any way i can fix it!? Thanks so much for your help!
-Craig-

jdm_91crx
10-26-2007, 11:02 AM
you might need a new gasket, maybe. You should get it fixed before it gets worst man...

CraigMW
10-27-2007, 02:16 PM
Thanks man... i just noticed it so im gonna take it to someone to get it checked out! Thanks for the reply!

b16ftw
10-27-2007, 02:29 PM
yeah when my friend blew his headgasket oil was leaking around there too.

http://cgi.ebay.com/ebaymotors/BUDDY-CLUB-RACING-HEAD-GASKET-CIVIC-INTEGRA-B16-B18_W0QQcmdZViewItemQQcategoryZ46098QQihZ005QQitem Z150174153527QQrdZ1QQsspagenameZWDVW

buddy club ftw!

that's what i got at least. lol.

TheProfiteer
10-27-2007, 02:45 PM
before you go and blow so much money on a head gasket job, check the distributor o-ring or your valve cover gasket.

CraigMW
10-27-2007, 02:49 PM
Thanx for all yalls help! I really appreciate it!

chituntang
10-27-2007, 06:52 PM
Use something to get the oil off, then check about a week later to find where exactly the leak is.

Getting the buddy club headgasket sure can bring extra hp, but I would not get it because it raise the compression ratio and if it hits a bad tank of gas, it is not so good... Just my only opinion though. Just make sure what you want to do with the car before you do it.

Terror
10-28-2007, 10:14 AM
yes sir, if you DO in fact have a leaky headgasket i would replace it asap because they do get worse and worse.

BlkCD5
10-28-2007, 10:17 AM
make sure when you clean it off to put that dye in it. A special light will show where its most concentrated.

chsdog55
10-28-2007, 10:28 AM
Check ur O-Ring on the Distributer and Your Cam seal. Alot of the times it will leak down in the grooves all the way down to where the block and head meet and it stops there because there is a little lip that sticks on on the block..

CraigMW
10-31-2007, 10:28 AM
Well i wiped it off and it is deff. coming from between the head and block! Thanks for all the advice! Keep it coming!

william_jeff
10-31-2007, 10:34 AM
you said you have an SI = DOHC VTEC = common cam plug leakage problem...

replace that first before you dump a lot of money into replacing your headgasket.

how many miles do you have on that engine btw?

CraigMW
11-01-2007, 04:19 PM
its got prolly around 80,000 or so.. not exactly sure! but yes, it an Si dohc vtec!

Turbodude06
11-01-2007, 04:38 PM
it could also be just your cam seal they leak down the block, and can look like a headgasket leak, and they always leak, check that, those are easy and cheap to fix....Good luck.....