Log in

View Full Version : LS/ B-Seris Parts


Grimm Reeper
10-21-2007, 04:02 PM
EF/B-Series mounts- SOLD!!

2 OBD1 LS Wiring Harnesses- $60 for both

LS Intake Manifold- $25.

OBD0 (non VTEC) dizzy- SOLD!!

Stock EF mounts- $15.

LS Alternator- $30.

B-Series Half Shaft- $50.

LS lower cover- $10.

LS Flywheel- $40.

EF Pass Corner- $5.

EF Overflow Reservoir- $5.

00 Civic Si Stock Cams- $50.

00 Civic Si Stock Camgears- $25

Used ACT 6-Puck Sprung clutch and Pressure Plate- $40.

EF/B-Series **** linkage (just the linkage, no bushing, no shifter)- SOLD!!

D-Series Pass Axle- $40.

http://i234.photobucket.com/albums/ee223/JDM_EK4/Stock_Cams.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Stock_Camgears.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/LS_bottom.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/LSFlywheel.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/EF_Coolant.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/EF_Pass.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/ACTClutch.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/D-SeriesAxle.jpg

:goodjob: :boobies: :taun: :bump: :cheers: :camera: :bannana:
JDM onlyy
10-21-2007, 04:09 PM
Do you have all the stock EF mounts? And what harnesses are those?
Grimm Reeper
10-21-2007, 04:17 PM
yea, and 1 is and OBD 0 and the other is OBD 1 LS harness
punkr6
10-21-2007, 04:18 PM
where u located ?
I need a harness !
Grimm Reeper
10-21-2007, 04:22 PM
PM'd
allvtec
10-21-2007, 07:07 PM
pmd
Grimm Reeper
10-21-2007, 10:14 PM
pmd

PM returned
Barefoot
10-21-2007, 11:33 PM
nice stuff g/l on sale
Grimm Reeper
10-22-2007, 11:46 AM
bump
Grimm Reeper
10-23-2007, 07:11 AM
ttt
GSRtegŪ
10-23-2007, 07:54 PM
ttt
Grimm Reeper
10-24-2007, 06:38 PM
bump
Grimm Reeper
10-25-2007, 04:58 PM
ttt
OG-Skinny
10-25-2007, 06:39 PM
Don't forget about me! If you can, find me a OBD0-OBD1 Jumper harness.. I'll take that.
Grimm Reeper
10-25-2007, 06:41 PM
Don't forget about me! If you can, find me a OBD0-OBD1 Jumper harness.. I'll take that.
Damn, all I have is OBD2-OBD1
ranj
10-25-2007, 08:38 PM
would that clutch work in a 1991 ls integra?
Grimm Reeper
10-26-2007, 04:16 PM
bump
OG-Skinny
10-26-2007, 06:23 PM
would that clutch work in a 1991 ls integra?

It should. I have a 98 Clutch in my 90 LS swap.
GSRtegŪ
10-27-2007, 04:52 AM
ttt
Grimm Reeper
10-28-2007, 06:45 AM
Fawk'n crack of dawn bump
lsi-crvtec
10-28-2007, 09:19 PM
is it a ODB2a to ODB1
Grimm Reeper
10-28-2007, 09:49 PM
is it a ODB2a to ODB1

PM Returned
Grimm Reeper
11-12-2007, 07:45 AM
bump
Grimm Reeper
11-20-2007, 11:54 PM
ttt
kainkauz
11-21-2007, 03:16 PM
bump
Grimm Reeper
11-28-2007, 09:09 AM
bump
bowdown201
11-28-2007, 11:49 AM
Is that b series half-shaft off of an automatic or manual
Grimm Reeper
11-28-2007, 11:59 AM
Is that b series half-shaft off of an automatic or manual

it came from a manual
GSRtegŪ
11-28-2007, 12:49 PM
TTT for my boy Tony.
eghonda88
11-28-2007, 04:55 PM
are the wiring harnesses uncut?
Grimm Reeper
11-28-2007, 04:59 PM
are the wiring harnesses uncut?

It was until I need the Knock sensor wire lol
vtecace23
11-28-2007, 05:10 PM
g/l with sale
LIKEG6
11-28-2007, 08:33 PM
is the halfshaft out of a DA?

If so, where are you located?
Grimm Reeper
11-29-2007, 01:32 PM
Parts still here :goodjob: