PDA

View Full Version : I WANT 350 WHP


vancem3m3
10-18-2007, 08:16 PM
I GOT EAGLE RODS AND A 50 TRIM TURBO BUT I DONT KNOW WANT PISTONS TO GET WILL STOCK PISTONS HOLD UP? ANYONE GOT WHAT I NEEED??
ATK_Designs
10-18-2007, 08:27 PM
that's really helpful with the info provided. I assume you have an M3??? :rolleyes:
Z33_kid
10-18-2007, 08:28 PM
i assume he has a gsr
Revmaynard
10-18-2007, 08:30 PM
Yea, my huffy is holding on with stock pistons.

I figure you have a car you wanna boost?
madking411
10-18-2007, 08:50 PM
'EAGLE RODS'....I thought he had an Eagle Talon when i first read that....guess not
Thighs
10-18-2007, 08:52 PM
wtf is this guy talking about?
all i got out of his post is that he wants to boost his car...?
Gutling
10-18-2007, 08:57 PM
Yea, I got what you need
RX4BRDM
10-18-2007, 09:33 PM
Pistons should be fine, and usually are fine, its the connecting rods you need to worry about, although they may be strong enough aswell if they are forged.
EmminoDaGreat
10-18-2007, 09:52 PM
you need to get aftermarket pistons, the b series ringlands will crack either before you make it or shortly after.
Gutling
10-18-2007, 09:59 PM
whats in a gsr? i had a b16a boosted to ~300whp and it was completly factory, and held fine
NAG2I
10-18-2007, 10:03 PM
if he has forged rods though hes gonna need pistons too
Master Shake
10-18-2007, 10:15 PM
i assume he has a gsrx2
i think the little tag under his username "boosted gsr" gives it away. reps
scttydb411
10-19-2007, 12:41 AM
get forged pistons michael. the stock ones won't last at that goal.
Z U L8R
10-19-2007, 07:34 PM
then get a 350 shot of nitrous OMIGAW DUH!
:D
EmminoDaGreat
10-19-2007, 10:02 PM
shut up foo. get that tranny in. :D
Spektrewing386
10-19-2007, 11:18 PM
i hate when all people post is "i want my hatchback to have 230hp... what do i need?"

well duh its so obvious.

maybe this guy has a Mitsubishi Lancer EVO IX GSR?

hes probably too embarassed to post a 1 sentance question when it should have been at least 5 sentances and he didnt even tell us what engine it is for. he didnt even tell us what turbo it is or how many PSI hes going to run or any of the supporting equipment for it. IMHO this guy isnt even ready to even start thinking about turboing his car.


oh yeah:
CAPS LOCK IS GAY
http://www.reasoner.org/wp-content/photos/CapsLock.jpg
Thighs
10-20-2007, 12:13 AM
^^x2.

u got dem pics?
Tenpsi
10-20-2007, 10:23 AM
if you do the pistons too you will be good for somewhere around 15psi. That should be close to your 350 hp goal.
crashtke
10-20-2007, 01:45 PM
I would go forged...one bad tank of gas with stock pistons could fry em with a little detonation. My wrx has done decent with stock pistons (not forged) but for the engine I am building I am throwing in forged pistons as an added security measure.
vancem3m3
10-20-2007, 03:47 PM
when the tag boosted gsr and you dont know that means then dont post this theads not for you.for those of you that do know thanks for your advice and in
site.and if you really just need a little more info. here it is...

99 acura integra GSR is the car
2000 b18b1 stock block rebuilt .20 over
GSR tranny
2001 itr fully built head all crower internals 1 mm over valves GSR cams.
full 3in. turbo back exaust
t3/t4 turbo .63-a/r .60-a/r and a half tail/greddy wastegate
i bought some rods and was looking for some pistons and some good insite..
for my 350whp goal...
haynbtu
10-20-2007, 04:11 PM
get forged pistons michael. the stock ones won't last at that goal.
yea i agree wit this person!:goodjob:
gtikid
10-20-2007, 04:32 PM
when the tag boosted gsr and you dont know that means then dont post this theads not for you.for those of you that do know thanks for your advice and in
site.and if you really just need a little more info. here it is...

99 acura integra GSR is the car
2000 b18b1 stock block rebuilt .20 over
GSR tranny
2001 itr fully built head all crower internals 1 mm over valves GSR cams.
full 3in. turbo back exaust
t3/t4 turbo .63-a/r .60-a/r and a half tail/greddy wastegate
i bought some rods and was looking for some pistons and some good insite..
for my 350whp goal...

:goodjob: I agree

It's pretty obvious who knows what they're talkin about and who's on this site just for the porn...
Tenpsi
10-21-2007, 10:14 AM
theres porn on this site??
Gutling
10-21-2007, 10:17 AM
all these years i been waisting time reading about cars, when i could have seen boobies
chituntang
10-23-2007, 04:31 AM
Sell everything, get a Supra, NSX, also a lot of choices out there. I know turbo tegs are fast, but get a better car if you wanted that much hp... (unless all you do is going straight)