FS/FT Redtop 89 S13 Hatch in West Virginia

[Ltdnismorace]

NOW RUNNING... HAS A VACUUM LEAK CAUSING A VARIATING IDLE, BUT IT RUNS :D

Only issue is the two front wheels have been stripped and need to be painted white to match the rears and the rear hatch was swapped after painted the outside so it is red and does not match, however the inside of the hatch was painted when the inside was done. Never know what might strike my interest as long as it's running, I'm tired of having a paperweight in my garage. The footwork will have to be done by the other person as my job in Special Ops does not allow me the ability to travel. My driveway has a downhill slope towards the door and I can't push the car out to get full side shots by myself, so I took what I could to show dentless quarters, fenders, and doors.

7.5k includes everything for straight up cash, trades must be running and have heat, A/C is prefered but not mandatory. S10/Sonomas, S14 5 speeds, **** whatever throw me some offers. Again, I work Special Ops for the state of west virginia division of corrections and am on call 24 hours a day, 7 days a week so traveling for me is out of the question, footwork would HAVE to be done by the other party, for this I apologize in advance but I am being very open and honest about it.

VIN # availible upon request, first mod to see this PM me and I'll give it to you, I haven't been on here in a while and don't know which mod is handling it now.

engine-sr20det /5spd
recently rebuilt (maybe ~1000 miles on it)
new head from nissan
new oem parts - all bearings/valves/valve stems/ seals/gaskets
timing chain/timing chain tensioner
pcv valve
water pump
oil pump/timing chain cover
crankshaft angle sensor
power super v belt
coolant temp sensor
knock sensor

hks 264 intake/264 exhaust camshafts (stage 2s)
peak performance pro valve springs
greddy rocker arm stoppers
apex'i metal headgasket
arp rod bolts
arp headstud kit
pro-fab design intake manifold gasket
nismo adjustable fuel pressure regulator
walboro 255lph fuel pump
nismo thermostat
S13 JDM SR20det ECU
megan racing exhaust
Trunk relocation kit for battery

hks ssqv
front mount intercooler
Greddy catch can
nismo oil cap
nismo radiator cap
powdercoated valve cover
carbon fiber spark plug cover
chrome valve cover nuts

act street/strip clutch
fidanza flywheel
earl's stainless clutch line
s14 brake booster/mbc

D2 coilovers
spl tension rods
c-pillar bar
Volk Daytona 17x7 +35 all around (run a 25mm spacer all around for finished offset of +10)
215-40-17 federal 595rs
Circuit Sports Hood Damper kit
JGY Oil Feed line with inline restrictor
Circuit Sports Coolant feed and return lines

Perfect S14 seats with Sparco Harnesses
Sparco Hood pins (uninstalled)
Greddy Turbo Timer
Greddy Profec Boost Controller
Razor WB402-CJ Alarm w/ Keyless Entry
Eclipse 55040 CD Player
Memphis MClass 15-MC46 4x6 Front
Memphis MClass 15-MC46 4x6 Rear
MTX Thunder Series 4244

Depending on trade, I also have a complete unmounted URAS style aero kit.
http://i35.photobucket.com/albums/d186/Lilredrover/aero1.jpg
I also have an extra head, other various extra parts, valve springs, extra exhaust, a set of corbeau seats, etc. On to pics. Some are old, some or not. The interior photos with the white steering wheels are the most recent.

http://i35.photobucket.com/albums/d186/Lilredrover/whatever015.jpg

http://i35.photobucket.com/albums/d186/Lilredrover/whatever013.jpg



http://i35.photobucket.com/albums/d186/Lilredrover/whatever010.jpg

http://i35.photobucket.com/albums/d186/Lilredrover/whatever009.jpg

http://i35.photobucket.com/albums/d186/Lilredrover/whatever008.jpg

http://i35.photobucket.com/albums/d186/Lilredrover/whatever005.jpg

http://i35.photobucket.com/albums/d186/Lilredrover/whatever001.jpg

http://i35.photobucket.com/albums/d186/Lilredrover/radioboost.jpg

http://i35.photobucket.com/albums/d186/Lilredrover/defi.jpg

[Steven2]

Interested in a trade for a GS-R?

http://www.importatlanta.com/forums/showthread.php?t=142472

[-S Double C-]

your not running no type of vavletrain with those cams?

[Ltdnismorace]

your not running no type of vavletrain with those cams?
new oem parts - all bearings/valves/valve stems/ seals/gaskets
peak performance pro valve springs

for my power goals an aggressive valve train wassn't a must, the springs would be more than enough to get high enough revving for me. Those cams are ideal for a GT2871 making power up to 330-350 whp.

[Ltdnismorace]

Interested in a trade for a GS-R?

http://www.importatlanta.com/forums/showthread.php?t=142472

possibly.... hmmm... any modifications whatsoever?

[Steven2]

Nope is stock but its begging to be modded...

[Ltdnismorace]

ok, I'll get back with yah, I'm not really a honda fan, but I do need a reliable daily.

To clarify, I have no cash to throw towards anything, so the trade would have to be straight up, or cash on your end. I work 7 at night until 7 in the morning, so don't expect a PM returned during that time. Thanks in advance everyone.

[Ltdnismorace]

accepting offers, both trade and straight cash purchase.

[Ltdnismorace]

I may be willing to take a trade that is less valuable just to get something to drive for winter.

[Ltdnismorace]

throw some offers people...

[Gutling]

bump for my old car, lol some of those pics are of it in my yard :(
some more pics to help out

[Ltdnismorace]

thanks buddy, yeah the stereo and defi gauge pictures are a few of the ones I saved and used.... I'm dropping the price to 5k... you can ask Gutling, it's lower than the price he was asking, and I've added, turbo, manifold, injectors, rail, ECU, aero, coilovers, volks, tires....

my jetta is having "issues" and I need money to buy a relialbe DD to get me through winter like... yesterday.

[k20]

bump for a great car

[Ltdnismorace]

^thanks :D

[Nightsrt4]

Nice car Bump^^^^

[Ltdnismorace]

thanks, I've had requests for full side shots, these are the best I have right now. They are old, of the car when Gutling had it before.

http://i35.photobucket.com/albums/d186/Lilredrover/Drag240.jpg

http://i35.photobucket.com/albums/d186/Lilredrover/240passengerfront.jpg

[kaotickaozpunk]

pm'd

[Ltdnismorace]

PM returned

[v8killacivic]

bump for an old skool

[Ltdnismorace]

oldie but goodie

[kenscivic]

I'll trade you a 91 toyota 4wd pickup for it. motor and trans rebuilt in 04 , new rear end about 200 miles ago, its my DD. body is 5 out of 10 along with interior but everything works great on it (even a/c)

It's not worth 5k but neither is a project car that doesnt run, so i figured i would throw it out there

[Ltdnismorace]

you were doing so good until your last statement.... *snipped*

[Ltdnismorace]

if a mod wouldn't mind locking this, I'm going to attempt to fix it again before getting rid of it

[BuBBa DRiFT]

PM me if your interested in what offer I have. You may like it.

[-S Double C-]

would you sell that uras kit seperately?

[Ltdnismorace]

would you sell that uras kit seperately?

nope... sorry


PM me if your interested in what offer I have. You may like it.

what offer would that be?

[kaotickaozpunk]

pm'd

[Ltdnismorace]

got the car running tonight... I'm gonna keep ahold of it for a while.

[sgs14_ryan]

pm'd!

[sgs14_ryan]

http://i40.photobucket.com/albums/e226/EVO_RYAN/mys14.jpg

http://i40.photobucket.com/albums/e226/EVO_RYAN/mys142.jpg

the driver front fender is now primer black, ill get u a pic of the fender 2night! i wanted to keep the wheels if possible...

[Ltdnismorace]

I PMd you my email

[Benefit]

lol same dilemma i was going through, want to sell when its not running , fix it and keep it.

[Ltdnismorace]

it's running now brotha... runs strong... the clutch grabs so quick that when I first pulled out of the garage i gave it just a little gas and now I have black marks on my garage floor all the way out HAHAHAHAHA...

[Benefit]

haahaha damn...yea man keep it...trust me..you will want it back as soon as you sell it

[Ltdnismorace]

dunno... I'm not letting it go for 5k anymore, but i may still sell/trade it for the right offer.

[sgs14_ryan]

yo man...emailed you with details.

oh and can u post some better exterior pics...please

[Gutling]

lol i seriously thought about buying it back from you, i miss it ha. But i got another car selling now, and two sitting in garage being neglected :( so glad its running, ha ha this is your first time actually driving it since i sold it to you?

[Ltdnismorace]

lol i seriously thought about buying it back from you, i miss it ha. But i got another car selling now, and two sitting in garage being neglected :( so glad its running, ha ha this is your first time actually driving it since i sold it to you?

yep, it got built up BIG and right before the injectors and tune were going to happen thing came up and I had to part some of the high dollars stuff.


yo man...emailed you with details.

oh and can u post some better exterior pics...please

i replied to your email... just can't see myself trading straight up for a car with damage and an engine/tranny combo with 200k+ miles man, I'm gonna need some boot.

[Z32redondo]

My 300zx???

[Ltdnismorace]

My 300zx???

PMd... anything is possible

[blaknoize]

And talk about THROWING things in here. I just want to see what u say. Please pm me after u look at it.
http://www.importatlanta.com/forums/showthread.php?t=137024

[Ltdnismorace]

to be honest with you I hate CRXs with a kind of passion I can't even explain, thanks for taking interest though.

[Ltdnismorace]

bump this on up... Vacuum and Boost leaks are suspected, but that's easy ****, just takes time.

[Z32redondo]

bump this on up... Vacuum and Boost leaks are suspected, but that's easy ****, just takes time.

GL man

[Ltdnismorace]

GL man

thank you man, I ran your car by the wife and although she loved the looks, she informed me I would never have a passenger in a convertible, she thinks it's unsafe so that's a no go... good luck to you as well.

[P-town-zenki]

trade for a zenki 5-spd?

[Ltdnismorace]

PM returned