boosted f22?

[cava1i3r]

what do yall think about the boosted f22

[.blank cd]

which boosted f22?

[WhiteAccord]

Damn Noobs... Ill let you handle this one /\/\

[.blank cd]

what do yall think about the boosted f22

when you say "the boosted F22" you must specify which/what you're talking about...

If your talkin about boosting an F22 in general, go for it. if its done right then its the best SOHC honda block you can boost, probably the best honda block period. If done wrong you can have a big mess on your hands. Hondas F and H series motors are the "big blocks" of the honda world

[BlkCD5]

damn, it never ends...

[.blank cd]

Hey BlkCD5, i like your civic.

[BlkCD5]

thanks, The accord was just too much. So i decided to upgrade :D

[Tech5]

I like how you tell someone something an what is best for them for there car at that time, an they go behind your back, like they don't trust you , SHANE Fu88ing a88 hole

[cava1i3r]

i was just seeing how it was....by other ppl that have went this route already

[Tech5]

I already seen an been threw this route with a friend of my A88 whip

[Tech5]

am not going to tell you a lie, that would be dumb huh, but I understand

[greasemunkey]

don't do it...just ask josh about my f22 lol, I seriously had everything to do it then my 2ND f22 pretty much went to hell, btw josh thanks for figuring it out ill be there tomorrow morning err...this morning.

[.blank cd]

do you have an accord that you need to boost?

[Tech5]

LOL am sorry

[.blank cd]

don't do it...just ask josh about my f22 lol, I seriously had everything to do it then my 2ND f22 pretty much went to hell

my buddy was running 10psi on his F22 daily. never had any problems. had a great tuner tho. everything was set up perfectly. how it should be done

[Tech5]

did you think what you are gonna do about it? ( car) shanes car is damn quick man, I will put my word on it

[greasemunkey]

but if you want to I have parts! the turbo, injectors, and bov will be fs soon

[Tech5]

^^^ Agree +1 depends on how well the motor is taken care of

[greasemunkey]

did you think what you are gonna do about it? ( car) shanes car is damn quick man, I will put my word on itim really thinking about it but talking to some people and doing some research tells me slow and not to throw that much on top to be honest but we'l see I will look at it

[greasemunkey]

what do yall think about the boosted f22If I were you man and my motor was still rinning right, id do alot of research seeing what all fits, and get it TUNED to 8psi, 10 is pushing it if you like to pound on it sometimes like me;)

[Tech5]

dont look, ride an drive it, its qiuck, but thats between you two

[greasemunkey]

lol, will do...hey can you pm me what I owe you?

[Tech5]

Going to bed Ill see you at the shop In the AM, by the way thank you for coming out an giving me an my shop a chance, Joshua

[BlkCD5]

Just do it right. For God's sake, most times when people blow their **** up, its negligence. Stock motor can take about 8psi, but you can get away with a lil more. If you're serious about it, get a spare block and build the motor.



originally posted by TR_Accord
don't do it...just ask josh about my f22 lol, I seriously had everything to do it then my 2ND f22 pretty much went to hell

care to explain in detail?

[greasemunkey]

my car is broke lol, i took it to him to figure out why its broke. cool shop cool people id recommend it.

[WhiteAccord]

*Walks in....*

Thats what I did...bought a spare motor and reduced downtime.

Too bad the F22 can only handle 8psi...F23 14PSI!!!!!!

*Walks Out...*

[BlkCD5]

:thinking: :???: , proof?

[Tech5]

Thanks man, I think if you had gotten a Newer JDM engine with alot less miles, I know for a fact you can handle boost /Nitrous daily with no problems if you got it tuned or used low boost , Joshua

[WhiteAccord]

:thinking: :???: , proof?

Proof of what?

[greasemunkey]

well if it goes to you guys I want to see it happen! lol, but I know you guys have an h22 just sittin there wainting to go in lol

[WhiteAccord]

See what happened? I missed alot...

[greasemunkey]

might be a trade happening if it works out right

[.blank cd]

dont boost the H22. that thing handles maybe 5psi. FRM sleeves+boost FTL. You'll make maybe a little over 200hp

[BlkCD5]

originally posted by whiteaccord
Proof of what?

that the F23 can hold up to 14psi. Similiar boost was done on a F22, but who knows how long that lasted.

[.blank cd]

ask EminotheGreat. he's boosted his F23. Brad94Accord had his F22 up at 10psi daily and was running 220+hp, with 290tq. thats ridiculous

[WhiteAccord]

A guy not located in GA has his boosted F23 stock motor at 14psi for about two years got tired of it, built it and ran 32psi....hehehe

H22 with stock internals...FTL

[BlkCD5]

plus F22 blocks are a dime a dozen. **** up a H22 and your wallet will burn. Did anyone also mention the H22 barely has torque????, which accords need.

[greasemunkey]

thats f22b tho, on a cb7 its a bit different...pieceing together kits and chipped ecu's...

(refering to blank cd)

[.blank cd]

The H22s torque isnt bad, that motor is just best built N/A. but the motor by itself in the CD chassis, or the CB wakes it up alot

[.blank cd]

thats f22b tho, on a cb7 its a bit different...pieceing together kits and chipped ecu's...

(refering to blank cd)

Piece together a DSM turbo. something like out of an eclipse. the injectors should fit in that motor

[WhiteAccord]

The H22s torque isnt bad, that motor is just best built N/A. but the motor by itself in the CD chassis, or the CB wakes it up alot

Technically..... N/A versions of this car is a tad......short in power.

[greasemunkey]

Piece together a DSM turbo. something like out of an eclipse. the injectors should fit in that motoryeah thats what i got...most expensive part would be custom piping for everything

[greasemunkey]

oh wait, I just figured out something lol, shane=cava1i3r lol, damn man you could've said somethin haha

[RX4BRDM]

My f20 handles over 20psi with a 3mm HG. All of the internals are stock thus far.

[BlkCD5]

:goodjob: but why not just save time and money building the whole thing?

[RUFFIAN]

what do yall think about the boosted f22It'll be great. I'll let you know how it is soon. ;) I'm piecing together a setup for mine right now:ninja:

[greasemunkey]

need any parts ruffian???

[RUFFIAN]

yeah I need a later model f22 turbo mainfold.

[greasemunkey]

ah...that I don't have

[BlkCD5]

http://www.f22parts.com/item_turboheader.htm :goodjob:

[EmminoDaGreat]

i drive my f23 daily, its fun. not super fast, but it does the job, im at 6psi making over 200whp/ft/lbs. when i get bored, the record on stock block is 17psi, so i figure i will try to beat that, when i get my 3 bar map.

[dazn]

what are you using to tune?

[TheChosenOne]

I'm bringing this one back from the dead because I am serious about doing it.

I know from research, that the DSM turbo route is the most cost effective way to boost a f22a.

My motor is running great and has had all the maintainance necessary, but it is 200k into the game.

With that being said, I want to run about 7-9 psi, and be "reliable".

I want some feedback in the do's and dont's of a budget boost project.

[.blank cd]

You have an accord too??? Welcome to the community

[scttydb411]

the biggest mistake on a budget turbo project is when people decide that they are going to run low boost and think it'll be fine to just run a basemap...get it tuned.

i'm all for budget boost builds. i'm still running my junkyard setup i built and installed from over 4.5 years ago.

[TheChosenOne]

You have an accord too??? Welcome to the community
Hells ya brother! :goodjob:

I sold the integra and hatch, and decided to start fresh with a bone stock cb7.

scttydb411the biggest mistake on a budget turbo project is when people decide that they are going to run low boost and think it'll be fine to just run a basemap...get it tuned.

i'm all for budget boost builds. i'm still running my junkyard setup i built and installed from over 4.5 years ago.
I am right with you. I definantly going to get a tune, I just want to run low boost to minimize the wear-and-tear of a 200K boosted motor.:yes:

scttydb411, can you chip a p06?

Also, what else would I need for the turbo setup to actually start, and run properly? 450cc DSM Injectors, Chipped and tuned ecu, ec?:thinking:

[1NonlyAccord]

i drive my f23 daily, its fun. not super fast, but it does the job, im at 6psi making over 200whp/ft/lbs. when i get bored, the record on stock block is 17psi, so i figure i will try to beat that, when i get my 3 bar map.

stock block wth internals can handle 17psi?

[BlkCD5]

We'll see. Some motors are just miracles.

[.blank cd]

Hells ya brother! :goodjob:

I sold the integra and hatch, and decided to start fresh with a bone stock cb7.
Awesome platform to start with. Now you know since you've been comin fresh w/ the integra and the hatch, you have to come correct with this too. which is why you should buy my rotors!!!

[TheChosenOne]

lol... well, that is a slight deviation from my "Operation SoulBruhvah Spec I" list of thing-to-do, but I'm open minded...

What are they?

[.blank cd]

Theyre cross drilled, PMed

[scttydb411]

scttydb411, can you chip a p06?


yes...i can chip p06 and/or turn it into a p28 if you need it to be.