PDA

View Full Version : WHERE COULD I FIND THIS AIR CLEANER/FILTER COMBO??


thinkfast®
10-08-2007, 04:02 PM
http://i20.photobucket.com/albums/b229/deesta2/vegasshow07221.jpg

NOT THE BEST PIC BUT LOOKIN TO UPGRADE THE BLACK RUSTY POS I CURRENTLY HAVE, ALSO UPGRADING THE MANIFOLD/CARB
ANY IDEAS?? DOESNT HAVE TO BE THE SAME SHAPE, BUT SOMETHING SIMILAR

NO PEP BOYS SPECIAL EITHER IM LOOKIN FOR QUALITY.. THANKS
Sammich
10-08-2007, 04:06 PM
all that looks like a weber carb type setup...
Tracy
10-08-2007, 04:06 PM
www.froogle.com
thinkfast®
10-08-2007, 04:22 PM
THANKS TRACY, ALL I SEEN ON THAT SITE THO WAS SOMETHING ABOUT MACHETAZOS??

PLEASE ADVISE
Blitanicle99
10-08-2007, 07:41 PM
Summit racing has those. They are for Rat rods and other kinds of junk like that. Hell they make one for my weber carb on my 83 toyota. Check out Summits website under air cleaners for Carburators. And I have seen them at the store itself in mcdonough last time I went through there.
Tracy
10-08-2007, 07:42 PM
THANKS TRACY, ALL I SEEN ON THAT SITE THO WAS SOMETHING ABOUT MACHETAZOS??

PLEASE ADVISELOL!
thinkfast®
10-09-2007, 10:06 AM
looked up weber over @ Summit, didnt see anything??
checked on Jegs site too, nothin.. are these some sort of plenums that go over any carb, or do I need a weber carb and air filter setup??
Sammich
10-09-2007, 10:08 AM
here is a link on ebay that shows weber carb is what u need..i dnt know what car u got now..http://cgi.ebay.com/ebaymotors/Toyota-20R-22R-Weber-Carb-Conversion-Manual-Choke-Kit_W0QQcmdZViewItemQQcategoryZ33550QQihZ014QQitem Z330173025180QQrdZ1QQsspagenameZWDVW
thinkfast®
10-09-2007, 10:39 AM
Im really just lookin for that filter setup
I already got a Edelbrock manifold/carb combo Im goin with (so so much chrome)

looks like some sorta plenum and the dual filters on the end, is that a Weber part?
Sammich
10-09-2007, 10:44 AM
i dont know if you can get the weber air filter setup w/ the edelbrock manifold/carb you got...u may have to call weber about that
Blitanicle99
10-09-2007, 11:02 AM
Thats not an un common part. Hell I have seen it on Spike TV Trucks also. When I saw it, it was in the edlebrock section. Let me see if I can find it.
speedminded
10-09-2007, 11:15 AM
http://i20.photobucket.com/albums/b229/deesta2/vegasshow07221.jpg

NOT THE BEST PIC BUT LOOKIN TO UPGRADE THE BLACK RUSTY POS I CURRENTLY HAVE, ALSO UPGRADING THE MANIFOLD/CARB
ANY IDEAS?? DOESNT HAVE TO BE THE SAME SHAPE, BUT SOMETHING SIMILAR

NO PEP BOYS SPECIAL EITHER IM LOOKIN FOR QUALITY.. THANKSWhat engine is in it?
thinkfast®
10-09-2007, 11:21 AM
its goin in a 305/5.0
anothaRRR
10-09-2007, 12:22 PM
They sell those at summitt...
anothaRRR
10-09-2007, 12:31 PM
Found one, http://store.summitracing.com/partdetail.asp?autofilter=1&part=HLY%2D64280&N=700+115&autoview=sku
thinkfast®
10-09-2007, 12:50 PM
http://static.summitracing.com/global/images/prod/large/hly-64280.jpg

$260, DAAAAAAAAAAAMN LOL
anothaRRR
10-09-2007, 02:32 PM
Yeah, they are expensive, thats what I wanted for my cutlass but said the hell with that...
thinkfast®
10-09-2007, 02:40 PM
fuk it I aint got no more car pymts lol

Im bout to run w/ this, the edelbrock manifold/carb endurashine setup, digital dash, and upgrades to the trunk ;)

I should be sittin pretty by christmas :D
AnthonyF
10-09-2007, 06:20 PM
Summitracing.com

yearone.com <call them

jegs.com