PDA

View Full Version : The Ridiculously Poor Man's Swap.... 56K...ha



Grimm Reeper
09-29-2007, 12:42 PM
Here you go fellas, you guys asked for it and now I decided to put it for the Squad. If it's not EJ-EG then :2up: , naw if it runs then I guess it's cool... :lmfao: . I've lost all track of how long I've been working on and off on this swap, but not the price...**** when it put that big of a hole in your pocket you could never forget about it :goodjob: . My swap was built by a guy who's name I'm going to leave anonymous, but it was pisspoor, half-assed, and frustrating all in one. Now that I have more resources I can venture out and get it done the right way, but if I could sum up how long it's been I would clearly saw about 2 1/2 going on 3 years I've been working on this and trying to get the right parts. Some of the inspiration came from the OMNIMAN all-motor Si setup and then I've added a few of mine and subtracted a few of his.
My head was fine, but the gut who built it neglected to tell me that he didn't replace my cam seals and my **** was sqeating out oil like it just had multiple orgasms or something :lmfao: , so I replaced both of those with another friend and as luck would have it, a ****'n Lexus SC400 pulls by me on 75N, all I had to do was not pay him any attention, cause my car was and still isn't tuned. So he punched it and like an ass I dropped gears and passed his ass with his fine-ass woman on the side... me thinking "**** your LEXUS":lmfao: , but as soon as I got to the 285W loop my car just cut off.......and the reason....... MY ****IN TIMING BELT snapped. So we all know what that means, I just wanted to know which one and how many hit. So part 2 of the swap begins.

My Swap Consists with a B16A2 head and block.

HEAD: Ferrea Valve Steams, Ferrea Valve Seals, and Ferrea 6000 Valves (Intake/Exhaust)
JG Valve Springs, JG Titanium Retainers, and JG Adjustable Cam Gears
Buddy Club Pro Spec3 cams for the B16
The Intake and Exhaust sides of the head just recently received a PORT/POLISH from my neighbor...Thanks Tim, even though I know that you don't get on here much at all any more.

BLOCK: First off it's bored .25 over
JDM (lol... I had to throw that in there) CTR pistons also .25 over stock
I forgot the name of the Piston Rings, but there also .25 duhhh...:no: :screwy:
Stock Rods
Stock Crank

TRANSMISSION: S4 tranny, with a Stage 3 Competition Clutch, but the tranny is ****'d. It grinds in 2nd, 3rd, 4th. So I need another tranny, so if there's anyone that's out there and see's this hit me up, it would be nice to have GSR w/ LSD

Here's what you've been waiting for PICS, PICS, PICS :ninja: ya sneaky bastards...


http://i234.photobucket.com/albums/ee223/JDM_EK4/Image11.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/28.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/26.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/My_Stable.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0145.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0131-1.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0133.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0132.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0135.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0136.jpg it was boosted...not anymore
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0140.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0141.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0142.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0143.jpg


But it's going in the EJ1 now, and for anyone who tries to steal it, I hope you have Life Insurance:goodjob:

blackshine007
09-29-2007, 01:04 PM
I hope no one tries to steal it, but then again, you drive a honda and people are more ruthless in getting what they want. All I can say is be careful and good luck

Grimm Reeper
09-29-2007, 01:06 PM
I hope no one tries to steal it, but then again, you drive a honda and people are more ruthless in getting what they want. All I can say is be careful and good luck

Thanx man

cactusEG
09-29-2007, 01:14 PM
damn tony u have some cash to spend lol I wonna see this bad boy run one day. u gonna boost it ? and i bet u had so many head aches from this motor lol

Grimm Reeper
09-29-2007, 01:23 PM
damn tony u have some cash to spend lol I wonna see this bad boy run one day. u gonna boost it ? and i bet u had so many head aches from this motor lol
Naw, no boost for me... I don't like lag, and it also seem apparent that I don't like torque as well :lmfao:, but the swap was missing a few of a lot of parts for only 600, so really didn't think too much about it, but that's why I had the headaches.

I drove it when it was in the 98, it pulled a lil, but that's un-tuned

I look forward to see what it does in the EJ1

dcshoeco
09-29-2007, 01:34 PM
damn tony thats nice..almost 3 years on it is a long time on a build lol but o well seems like you've done a pretty good job..and u have some pretty lookin hands lol j/k..

Grimm Reeper
09-29-2007, 02:26 PM
Your gonna see them in person when I grab that purple drank your guaranteed to bring Elmer... :lmfao:

cactusEG
09-29-2007, 03:09 PM
Your gonna see them in person when I grab that purple drank your guaranteed to bring Elmer... :lmfao:


lol make him urs tony lol :lmao:... did u call me ? my brother picked up, i was cleaning the car.

GSRtegŪ
09-29-2007, 03:12 PM
Damn nice Tony.

Grimm Reeper
09-29-2007, 03:27 PM
lol make him urs tony lol :lmao:... did u call me ? my brother picked up, i was cleaning the car.

Yea Elmer told me... I was calling cause I could never remember his name, but when he came out and said it, I was like I couldn't remember what I had called for.... :lmfao:


Damn nice Tony.

Thanx JR, but I really can't wait to see what the numbers look like, but I'm pretty sure I'll be even more disappointed, but I always see a job through to the end.

Grimm Reeper
09-29-2007, 03:28 PM
My patience with this BS FTMFW

cactusEG
09-29-2007, 03:57 PM
Yea Elmer told me... I was calling cause I could never remember his name, but when he came out and said it, I was like I couldn't remember what I had called for.... :lmfao:



Thanx JR, but I really can't wait to see what the numbers look like, but I'm pretty sure I'll be even more disappointed, but I always see a job through to the end.


just rember elmer glue lol... is the valves the only head work u've done ??

puregroove
09-30-2007, 12:26 AM
dang...I don't think I'll be able to hang::: :ninja: :D

JDMJAYDC2
09-30-2007, 12:39 AM
looking good T good to see you finally told someone about the super sleeper motor.

Grimm Reeper
09-30-2007, 06:23 AM
just rember elmer glue lol... is the valves the only head work u've done ??
Well there's the port and polish, I basically changed the entire valvetrain, the the exception of the rocker arm cause I luv VTAKKK soooooo much yo..... :lmfao:


dang...I don't think I'll be able to hang::: :ninja: :D
We don't know that yet Eddie, I might just be pushing 115 to the wheels :thinking: :lmfao: :cry: :no: :ninja:


looking good T good to see you finally told someone about the super sleeper motor.
Yea, didn't really see any reason to hide it anymore, it's not going to be fast at all and I might wanna sell the entire thing to someone:ninja: . Hopefully this will inspire more people to do something all-motor, I think that this whole project was no more than 3 grand, that's still not as much as the price would be for someone who wants to boost their car and there's no lag just raw 4 bang'n power.

puregroove
09-30-2007, 10:02 AM
K series FTW!!! for raw 4bangin' powa::: :goodjob:

cactusEG
09-30-2007, 10:50 AM
K series FTW!!! for raw 4bangin' powa::: :goodjob:


K is the new B.... I heard that it comes out to be the same as ITR motor ??

puregroove
09-30-2007, 11:02 AM
more torque and the motor, itself, is lighter

response to bolt-ons is very good.

Grimm Reeper
09-30-2007, 11:23 AM
That's cool and all, but B16A2 FTMFW :lmfao:

for the time that I put in it.

Grimm Reeper
09-30-2007, 11:25 AM
K series FTW!!! for raw 4bangin' powa::: :goodjob:

K series cost to much if you do that, I'm sorry to say, but I'd just have to go and buy a V8:thinking: , just do a few lil changes that doesn't cost nearly as much as it do to work on a four banger.

cactusEG
09-30-2007, 11:35 AM
K series cost to much if you do that, I'm sorry to say, but I'd just have to go and buy a V8:thinking: , just do a few lil changes that doesn't cost nearly as much as it do to work on a four banger.

I'm shocked tony :eek:

puregroove
09-30-2007, 11:40 AM
K series cost to much if you do that, I'm sorry to say, but I'd just have to go and buy a V8:thinking: , just do a few lil changes that doesn't cost nearly as much as it do to work on a four banger.

agreed on the 8banger :goodjob: lol...

Grimm Reeper
09-30-2007, 11:56 AM
I'm shocked tony :eek:

Man do you know how much those things cost to the average joe, too fawk'n much :lmfao: and then that's not adding in how much to do the wiring harness and if you want to do bolt-ons man the list goes on.

To you rich people or mommy-daddy dependents, I do not salute you...:lmfao: :goodjob:

cactusEG
09-30-2007, 12:29 PM
Man do you know how much those things cost to the average joe, too fawk'n much :lmfao: and then that's not adding in how much to do the wiring harness and if you want to do bolt-ons man the list goes on.

To you rich people or mommy-daddy dependents, I do not salute you...:lmfao: :goodjob:

yea ur right it takes alot of money to make 4 bangers fast... the only V8 i would drive is the new GTO's

puregroove
09-30-2007, 12:35 PM
To you mommy-daddy dependents, I do not salute you...:lmfao: :goodjob:

+1 :D

GSRtegŪ
09-30-2007, 12:49 PM
K is the new B.... I heard that it comes out to be the same as ITR motor ??

Totally!

Grimm Reeper
09-30-2007, 01:40 PM
yea ur right it takes alot of money to make 4 bangers fast... the only V8 i would drive is the new GTO's

To be honest man on Friday Night Drags at AMS, there was a 6.0 and I was just disappointed

GSRtegŪ
09-30-2007, 02:17 PM
To be honest man on Friday Night Drags at AMS, there was a 6.0 and I was just disappointed

:(

Grimm Reeper
09-30-2007, 02:48 PM
Seems like there were a lot of people who took interest in this thread :lmfao:

bafbrian
09-30-2007, 09:10 PM
Good luck on finishing this up. I am hoping to have my swap in by my birthday in October.

Grimm Reeper
10-01-2007, 07:48 AM
I just dropped my head off at the machine shop for it to be fully assembled, cause I don't have the tools to put the springs back on :lmao: and I should hopefully have it back by if not before Wednesday.

cactusEG
10-01-2007, 09:59 AM
I just dropped my head off at the machine shop for it to be fully assembled, cause I don't have the tools to put the springs back on :lmao: and I should hopefully have it back by if not before Wednesday.



who is the company thats doing it ?

Grimm Reeper
10-01-2007, 10:25 AM
who is the company thats doing it ?

PM'd

OG-Skinny
10-01-2007, 07:56 PM
Good Luck Tony! Sell me your old B16 trans when your ready! :)

Grimm Reeper
10-02-2007, 07:03 AM
Good Luck Tony! Sell me your old B16 trans when your ready! :)

No prob Rhyne

JDMjoe
10-12-2007, 07:05 PM
Nice man, i got a b16 for my hatch. I hope to do a similar motor build down the road w/ the exception of a few things. If you ever dyno it let me know what you put down. Interested in how much power one could get by building a b16.

Grimm Reeper
10-12-2007, 08:07 PM
Nice man, i got a b16 for my hatch. I hope to do a similar motor build down the road w/ the exception of a few things. If you ever dyno it let me know what you put down. Interested in how much power one could get by building a b16.

Me too, I just got the head back today. Now I'm waiting for gaskets and **** to get here from inline4.

cactusEG
10-13-2007, 06:25 AM
Nice man, i got a b16 for my hatch. I hope to do a similar motor build down the road w/ the exception of a few things. If you ever dyno it let me know what you put down. Interested in how much power one could get by building a b16.

tonys the man at builds :goodjob:

Grimm Reeper
10-13-2007, 09:23 AM
tonys the man at builds :goodjob:

lol, I'm a noob :lmfao: :yes:

Thanx Jose

OG-Skinny
10-13-2007, 09:27 AM
lol, I'm a noob :lmfao: :yes:

Thanx Jose


:ninja::ninja::ninja: oooo.. Can't wait to see it.

Grimm Reeper
10-13-2007, 11:34 AM
This morning pics:
http://i234.photobucket.com/albums/ee223/JDM_EK4/Cam_Side.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Dizzy_Side.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Top_Side.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Cams_baby.jpg

Grimm Reeper
10-13-2007, 11:36 AM
My carpet looks so fresh and so clean clean :lmfao:

GSRtegŪ
10-13-2007, 02:57 PM
Looking good Tony. :goodjob: :bump:

Grimm Reeper
10-14-2007, 03:25 PM
cleared another one

Grimm Reeper
10-14-2007, 03:26 PM
I don't know why it did it 3 times ..lol

Grimm Reeper
10-14-2007, 03:26 PM
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-01371.jpghttp://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-01391.jpghttp://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-01401.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0141-1.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0142-1.jpg

Here go some updates of me pulling out the motor and the axles, bout fawk'n time :2up: to needing help.... :lmfao:

cactusEG
10-14-2007, 03:27 PM
damn tony u've been hard at work.. good stuff

Grimm Reeper
10-14-2007, 03:29 PM
There's is nothing more powerful than a Dedicated person.

Grimm Reeper
10-14-2007, 03:31 PM
All that space and I didn't even have to move my bike :lmfao: My Apartment w/ garage FTMFW

GSRtegŪ
10-14-2007, 05:34 PM
Looks good Tony. :goodjob: :bump:

cactusEG
10-17-2007, 03:09 PM
There's is nothing more powerful than a Dedicated person.

very tue... u need to be a insperational leader lol

Grimm Reeper
10-17-2007, 03:40 PM
very tue... u need to be a insperational leader lol

:lmfao: Naw, I'm a horrible role model let alone to be an inspirational leader :lmfao: I could just write down instructions and leave to whomever, whether or not if they're going to follow it or not lol

JDMjoe
10-17-2007, 05:18 PM
Me too, I just got the head back today. Now I'm waiting for gaskets and **** to get here from inline4.
Cool keep the tread posted LOL

Grimm Reeper
10-17-2007, 05:38 PM
Cool keep the tread posted LOL

No prob, I should be done by this weekend and what's your name?

JDMjoe
10-17-2007, 06:18 PM
Guess......... :D

Grimm Reeper
10-17-2007, 06:28 PM
Guess......... :D


:lmfao: No time, I'm bout to head to work, till tomorrow anonymous or Joe :thinking:

Grimm Reeper
10-17-2007, 06:29 PM
It's also nice to see people taking an interest in my slow Si build :lmao:

JDMjoe
10-17-2007, 06:41 PM
:lmfao: No time, I'm bout to head to work, till tomorrow anonymous or Joe :thinking:
Yeah man its joe lol

Grimm Reeper
10-18-2007, 06:35 AM
Yeah man its joe lol

Cool beans Joe

cactusEG
10-18-2007, 07:17 AM
MORE PICS ! ! ! lol

GSRtegŪ
10-18-2007, 10:51 AM
Cool beans Joe

You sound so white Tony lol.

Grimm Reeper
10-18-2007, 05:23 PM
You sound so white Tony lol.

Ohhhh **** everybody JR's calling me out of my name again :lmfao: , don't let me find you in the streets fool :ninja:


JR :fire:

:lmfao:

cactusEG
10-18-2007, 05:25 PM
Ohhhh **** everybody JR's calling me out of my name again :lmfao: , don't let me find you in the streets fool :ninja:


JR :fire:

:lmfao:

oh chet ! ! ! oh oh eww can i watch ???

Grimm Reeper
10-28-2007, 11:39 PM
Time to bump this biotch up cause I'm done snitches..... :lmfao:

cactusEG
10-29-2007, 07:29 AM
and a damn good job u did.

Grimm Reeper
10-29-2007, 08:38 AM
with the help of JR as well :thinking: lol

Grimm Reeper
06-09-2008, 06:59 PM
Bump for Just Chill :goodjob:

PURP
06-09-2008, 08:22 PM
wow... Im shaking now:lmfao:

Lets do it:goodjob::goodjob:

Grimm Reeper
06-09-2008, 08:24 PM
lol this was old, I just bumped it so that Chris could see it :lmfao:

PURP
06-09-2008, 08:26 PM
lol this was old, I just bumped it so that Chris could see it :lmfao:

Yeah I wasn't gonna post after I looked at the last post before yours but since you did I figured I would put my John HanCOCK on it...:LOL

Just_CHill
06-09-2008, 08:41 PM
Nice man. Can't wait to get my build done ans running greaat!

dcshoeco
06-09-2008, 09:01 PM
Lmao damn i was wondering why this was even brought up..

Grimm Reeper
06-09-2008, 09:11 PM
Lmao damn i was wondering why this was even brought up..

lol but it's getting alot of views. Good thing I don't have that motor anymore :D

dcshoeco
06-09-2008, 09:56 PM
lol but it's getting alot of views. Good thing I don't have that motor anymore :D


Lol true that..

slostang
06-09-2008, 10:01 PM
looks nice mang.

dcshoeco
06-09-2008, 10:03 PM
looks nice mang.


You hear that Tony he says you look nice :lmfao: :gay:

slostang
06-09-2008, 10:41 PM
:2up: