View Full Version : A-Ran is handy with tools apparently...
A-Ran and I have this thing about always trying to "one up" each other and keeping all kinds of little secret projects up our sleeves...
the other day i call him up and ask what he's doing... "oh nothing... just polishing a little on something, no biggie..."
yeah right...
well
this weekend he brings the CRX out with THIS:
http://i2.photobucket.com/albums/y44/hatch77/13.jpg
...dangit!
-jonathan
Grnblur
09-23-2007, 09:55 PM
man those are some nasty welds. hope they hold up.
The BUCKY
09-23-2007, 09:56 PM
put some filler on those welds to clean it up or something
A-ran
09-23-2007, 09:58 PM
ahahah :smileowne
A-ran
09-23-2007, 10:00 PM
I'm not done with it, btw...
I was about to say, the welds are good to go, the marks you see in the pictures are from where he was cleaning them up.
-jonathan
bigdare23
09-23-2007, 10:11 PM
home made miracle bar ftw!!!
jfrolang
09-23-2007, 10:55 PM
They seem like a good idea, the hatch opening is pretty big and could stand to be reinforced. I probably wouldn't install one though, unless my car was straight race. You lose the ability to have the cargo cover in place, and the rear view is gonna suck a little bit more. :(
KevinT707
09-24-2007, 12:29 AM
Does it make your CRX faster? .. Just wondering
Papa_Smurf
09-24-2007, 01:02 AM
Does it make your CRX faster? .. Just wondering
Does that pretty paint job make your car any faster?... Just wondering
Does that pretty paint job make your car any faster?... Just wondering
I doubt it's the paint, most likely it's his jay dee em hood cowl.
-jonathan
Papa_Smurf
09-24-2007, 01:09 AM
I doubt it's the paint, most likely it's his jay dee em hood cowl.
-jonathan
oh yea, that JDM front end add's like 50 hp right
^ jdm aeRodYNAmiCs yo
-jonathan
KevinT707
09-25-2007, 12:26 AM
HA .. I sense gayness.
"Jay Dee Em cowl hood" is gay, I put sockets in to raise the hood because it hits my valve cover (you boys with D15s & B16s wouldn't understand ;)). I ONLY got it painted after getting into a front-end collision.
90 ZC Hatch: Keep up with your comments & I'll be forced to flame your Pep-Boys foglights & fake JDM license plate.
HA .. I sense gayness.
"Jay Dee Em cowl hood" is gay, I put sockets in to raise the hood because it hits my valve cover (you boys with D15s & B16s wouldn't understand ;)). I ONLY got it painted after getting into a front-end collision.
i hear ya loud and clear! :)
...painted my valve cover, only to find that i didn't raise it enough.
dang
-jonathan
KevinT707
09-25-2007, 12:47 AM
i hear ya loud and clear! :)
...painted my valve cover, only to find that i didn't raise it enough.
dang
-jonathan
:D Yeah man, I feel ya. With a damn short-well socket it still hits (all the cage under the hood around the valve cover has been cut)!
What setup are you running & post up some pix of your car so I can know who to call-out this Sat at Showdown lol .. :yes:
I also cut the cage around the cover. lol... it still taps it a little bit on the driver side front corner of the cover though... *sigh*
My setup is a high comp. B20 vtec
my pics are in the squad pic thread.
I dunno if I'll be running or not, but I'll see you there. :)
-jonathan
bigdare23
09-25-2007, 01:01 AM
:D Yeah man, I feel ya. With a damn short-well socket it still hits (all the cage under the hood around the valve cover has been cut)!
What setup are you running & post up some pix of your car so I can know who to call-out this Sat at Showdown lol .. :yes:
watch your mouth Kevin, that's a 2.0L vtec driver you talking to there :goodjob:
Papa_Smurf
09-25-2007, 08:38 AM
HA .. I sense gayness.
"Jay Dee Em cowl hood" is gay, I put sockets in to raise the hood because it hits my valve cover (you boys with D15s & B16s wouldn't understand ;)). I ONLY got it painted after getting into a front-end collision.
90 ZC Hatch: Keep up with your comments & I'll be forced to flame your Pep-Boys foglights & fake JDM license plate.
:eek:!!!!!
:eek:!!!!!
...pwnage by chance?
-jonathan
Papa_Smurf
09-25-2007, 02:21 PM
indeed it is :(
no worries my friend :) I still like your car.
-jonathan
KevinT707
09-25-2007, 10:26 PM
My setup is a high comp. B20 vtec
my pics are in the squad pic thread.
I dunno if I'll be running or not, but I'll see you there. :)
-jonathan
Ohhh yeah, I forgot .. yeah definitely a nice setup. Diggin' the S2 cluster & the sick offset wheels.
Why build a high compression motor and not race it? Cause I know you didn't build it to daily it to work .. :gay:
jfrolang
09-25-2007, 10:30 PM
Why build a high compression motor and not race it? Cause I know you didn't build it to daily it to work .. :gay:
Absolut Truth. :goodjob:
Papa_Smurf
09-25-2007, 10:43 PM
Ohhh yeah, I forgot .. yeah definitely a nice setup. Diggin' the S2 cluster & the sick offset wheels.
Why build a high compression motor and not race it? Cause I know you didn't build it to daily it to work .. :gay:
well, he doesn't the those "sick offset" wheels anymore.
And i dont belive he built the eingine, he bought it in the car...lol
And he said he's not into drag racing, but i'm sure if you call him a pussy all weekend then he'll find his way onto the track :D
Ohhh yeah, I forgot .. yeah definitely a nice setup. Diggin' the S2 cluster & the sick offset wheels.
Why build a high compression motor and not race it? Cause I know you didn't build it to daily it to work .. :gay:
The biggest reason is an oil leak I'm having problems getting to quit. I'm also having an intermittent issue with my VSS conversion that causes vtec to pop in and out.
If i can manage to get these things done by saturday, I'll most likely put it down-track.
-jonathan
-S Double C-
09-25-2007, 10:55 PM
I also cut the cage around the cover. lol... it still taps it a little bit on the driver side front corner of the cover though... *sigh*
My setup is a high comp. B20 vtec
my pics are in the squad pic thread.
I dunno if I'll be running or not, but I'll see you there. :)
-jonathan
your vtec dont work you cant run
your vtec dont work
it doesn't? ;)
-jonathan
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.