KA24DE HeadGasket Change

[kwhudge]

Hi guys. I'm in the middle of replacing a head gasket on a 1995 Nissan 240sx. I've run into a problem. I can't seem to find the sequence to torque the cam bridges. I'm assuming from the inside out and I still have no idea what to torque them to. Assistance would be greatly appreciated. Thanks

[wazimba]

just go from the outside in an X sequence towards the center

[wazimba]

hand tighten them all first, especially the ones at the front and back

[wazimba]

edit , hand tighten then go center to outwards in x direction to 6.7-8.7 ft/lbs

[kwhudge]

I noticed they were numbered. Does it matter which bridge goes where