Hydro clutch in a cable tranny?

[I <3 my EF]

Can I use a hydro clutch/pressure plate in a cable tranny? Just wondering.

[mxglory258]

I'm not sure myself, but go to like autozone.com and cross part numbers from the calbe, to the hydro one. Chances are they're wrong, but might not be. It's a start. Sometimes though, they'll have diff. part numbers, but infact be the same general part.

[mxglory258]

They splines also vary. I had 2 pressure plates at one point, and one was one spline less or something like that.

Good luck either way!.

[I <3 my EF]

I was just thinking about doing that. But just wanted a sure answer. Thanks.:goodjob:

[bigdare23]

nope

[crhatchzc]

it depends on what cable tranny you have

[green91]

if your trans is 89+ then yes. i used a EG (92-95, hyrdo) clutch on a 91 Si trans with no problems.

[AMD_Civic]

nope their lying dude.. doesn't work...

[green91]

yes it does, i did it on my own car. if you dont know what the **** you are talking about then please dont try to give advice.

[AnTi-PooN]

pwnd ef squad prevails