OurOnePassion
09-17-2007, 08:20 AM
Helping a friend sell his RB25det (http://cgi.ebay.com/ebaymotors/Race-built-Rb25det-Complete-240sx-Swap_W0QQitemZ280153790718QQihZ018QQcategoryZ46098 QQrdZ1QQssPageNameZWD6VQQcmdZViewItem).
"I have a professionally built skyline rb25det turbo charged inline 6 engine built to hold 750hp, 5 speed transmission, Ecu, Wiring harness, AFC tuner, Crossmember, Motor mounts, and Drive shaft forsale. Everyhting you need to put it in a 240sx. I currently have the motor in my 240sx. It was just built 3 months ago and has less than 100 miles on it. Current setup is running 10lbs of boost and Estimated around 400WHP. Havent got it to a DYNO yet. Internals: Stock factory forged Crank, Eagle Rods, Weisco forged pistons, Chromoly rings, ACL Race bearings Rod/main, Bored .20 over, Decked.002, compression raised from stock 8:6 to 9:1 Assembly balanced, 3 layer steel head gasket, ARP Head studs, Head has been re-surfaced and polished, New valves, seals, springs, retainers, Stock cams, HKS bullet proof timing belt, New gaskets from top to bottom. Stock turbo- has less than 300 miles on it. 1500$ Cusco Exedy stage 4 race clutch. Still has the stickers on it, less than 100 miles, Custom bent intercooler piping for FMIC, Electronic/manual Boost controller, HKS BOV, Z32 MAF, All you need is a FMIC and a fuel pump. I have spent over 15000$ on parts not including machine work and labor. All Clearances when machined came out .001-.002, Motor is solid and runs awesome!!! The motor has 14 passes on it from the track. Have never had any trouble and I garantee this motors has been built with all top quality name brand parts and was built to be raced. If you are interested I still have the motor in my car and will show anyone who is interested. asking 10,000$ for intire swap (OBO). I promise you will not build anything close to it for anything less than 18,000. If interested you can call my cell (423) 619-4842, Scott, If you have questions feel free to ask. If you wanna see pictures just check out my 240sx on here and thats the engine. Reason for selling: I am going to professionaly build my 240sx for drag only and Im swaping over to a v8 to make more power. My loss is your gain, You will not be disappointed."
Check the Ebay (http://cgi.ebay.com/ebaymotors/Race-built-Rb25det-Complete-240sx-Swap_W0QQitemZ280153790718QQihZ018QQcategoryZ46098 QQrdZ1QQssPageNameZWD6VQQcmdZViewItem) for pics, or let me know if there are an other angles you need to see. I'd gladly put some up if anyone needs.
Yeah, the price seems to be high, but he isn't kidding [and if you think the price is too high, politely state what you would sell it for if you'd built it]... it's all been done right, and he has all the papers to prove it. I've been there from the first day he had it. He knows what he's doing!
Call him, or PM me...
btw - it's reallyreally fast. :D
"I have a professionally built skyline rb25det turbo charged inline 6 engine built to hold 750hp, 5 speed transmission, Ecu, Wiring harness, AFC tuner, Crossmember, Motor mounts, and Drive shaft forsale. Everyhting you need to put it in a 240sx. I currently have the motor in my 240sx. It was just built 3 months ago and has less than 100 miles on it. Current setup is running 10lbs of boost and Estimated around 400WHP. Havent got it to a DYNO yet. Internals: Stock factory forged Crank, Eagle Rods, Weisco forged pistons, Chromoly rings, ACL Race bearings Rod/main, Bored .20 over, Decked.002, compression raised from stock 8:6 to 9:1 Assembly balanced, 3 layer steel head gasket, ARP Head studs, Head has been re-surfaced and polished, New valves, seals, springs, retainers, Stock cams, HKS bullet proof timing belt, New gaskets from top to bottom. Stock turbo- has less than 300 miles on it. 1500$ Cusco Exedy stage 4 race clutch. Still has the stickers on it, less than 100 miles, Custom bent intercooler piping for FMIC, Electronic/manual Boost controller, HKS BOV, Z32 MAF, All you need is a FMIC and a fuel pump. I have spent over 15000$ on parts not including machine work and labor. All Clearances when machined came out .001-.002, Motor is solid and runs awesome!!! The motor has 14 passes on it from the track. Have never had any trouble and I garantee this motors has been built with all top quality name brand parts and was built to be raced. If you are interested I still have the motor in my car and will show anyone who is interested. asking 10,000$ for intire swap (OBO). I promise you will not build anything close to it for anything less than 18,000. If interested you can call my cell (423) 619-4842, Scott, If you have questions feel free to ask. If you wanna see pictures just check out my 240sx on here and thats the engine. Reason for selling: I am going to professionaly build my 240sx for drag only and Im swaping over to a v8 to make more power. My loss is your gain, You will not be disappointed."
Check the Ebay (http://cgi.ebay.com/ebaymotors/Race-built-Rb25det-Complete-240sx-Swap_W0QQitemZ280153790718QQihZ018QQcategoryZ46098 QQrdZ1QQssPageNameZWD6VQQcmdZViewItem) for pics, or let me know if there are an other angles you need to see. I'd gladly put some up if anyone needs.
Yeah, the price seems to be high, but he isn't kidding [and if you think the price is too high, politely state what you would sell it for if you'd built it]... it's all been done right, and he has all the papers to prove it. I've been there from the first day he had it. He knows what he's doing!
Call him, or PM me...
btw - it's reallyreally fast. :D