ECU for 89 CRX HF swap to 92-95 sohc vtec???

[AKAudioINC]

:idb:I need to find an ECU for my 1989 CRX HF that will work with the 92-95 D15B 5spd VTEC I just bought as an alternative to the stock D15 non-VTEC... What should I do and where should I go? I need one cheap as possible! I also need a wiring harness, so any help will be grateful :???:

Cory Brooks

[KPowerEP3]

The ECU you need is a P28.

[b17a1db2]

you should just convert to obd1, and just use a stock p28 ecu...

[KPowerEP3]

you should just convert to obd1, and just use a stock p28 ecu...
:doh:
Good call. I forgot the OBd1 conversion part. There's a website call the ZC resource that has some good info on converting obd-0 to OBD-1 as well as the wiring changes you need to make. Also, check out honda-tech, they're douchnozzles, but the site's full of good info.