Log in

View Full Version : maxima/altima question



SLo_MKIII
08-22-2007, 10:30 AM
would a 5spd maxima tranny bolt up to a 01 altima?

blackshine007
08-22-2007, 10:37 AM
Why don't you just find an altima with a 5 speed and bolt it up. Better yet, find an Altima SE and bolt it's tranny right up. The SE's come with an LSD. All years. But you'll have to take the CV axles too

SLo_MKIII
08-22-2007, 10:44 AM
Why don't you just find an altima with a 5 speed and bolt it up. Better yet, find an Altima SE and bolt it's tranny right up. The SE's come with an LSD. All years. But you'll have to take the CV axles too

i have a 01 SE... but all year SE tranny's will bolt up with no problem?

SLo_MKIII
08-22-2007, 10:49 AM
Why don't you just find an altima with a 5 speed and bolt it up. Better yet, find an Altima SE and bolt it's tranny right up. The SE's come with an LSD. All years. But you'll have to take the CV axles too

also what are all the parts i would need to have it ready to drive:???:

blackshine007
08-22-2007, 10:58 AM
Not too certain. But most of all the hard parts, like the pedal assembly, clutch slave and master cylinder, flywheel the aforementioned CV axles, MTX wiring harness, ECU swap to prevent the trans light from annoying you. I'd ask that question over on www.altimas.net and see what they say about it.

SLo_MKIII
08-22-2007, 11:06 AM
Not too certain. But most of all the hard parts, like the pedal assembly, clutch slave and master cylinder, flywheel the aforementioned CV axles, MTX wiring harness, ECU swap to prevent the trans light from annoying you. I'd ask that question over on www.altimas.net (http://www.altimas.net) and see what they say about it.

thanks again:goodjob:

blackshine007
08-22-2007, 11:15 AM
No problem :goodjob: