PDA

View Full Version : Comp Clutch B-Series 6 Puck Sprung NEW w/ PP, Pilot bearing ETC


Annihilation
08-15-2007, 02:23 PM
Comp Clutch B-Series 6 Puck Sprung NEW w/ PP, Pilot bearing ETC


This setup will NOT shake your car like crazy when it is engaged!!

CC 6 puck sprung Clutch Disc
Heavy Duty Pressure plate
PILOT BEARING
ALIGNMENT TOOL
Throw Out Bearing

$220

http://www.importatlanta.com/upload/files/414/Photo_081507_001.jpg

Copper Ceramic Clutch Disc
THIS IS THE SAME DISC IN THEIR STAGE 4 CLUTCH KITS
Retail is $180 for JUST THE DISC but i'm selling it as a kit for $220

just like this


Ceramic Series 1620 Disc


FITS ALL B-SERIES with HYDRO TRANNY



"Ceramic 6 Puck Sprung 1620 Disc
This 6 puck Ceramic disc is designed for the serious enthusiast with considerable modifications. This disc features 12 high-coefficient ceramic pads for quick engagement and the extreme duty friction needed. Our specifically designed high torque disc delivers maximum holding capacity without compromise. The sprung retainer assembly boasts 6 dual springs and 6 severe duty retainer rivets, ensuring power and reliability."
Nang
08-15-2007, 02:37 PM
got one from this man. good shit
Annihilation
08-16-2007, 05:06 PM
up
wespirl
08-16-2007, 05:33 PM
Oz... hold on to one for me... I'll come get it this weekend when i get ack to the states
punkr6
08-16-2007, 08:15 PM
can u get d-series and $ ?
n1accord
08-16-2007, 08:18 PM
I need that set up! This makes me sad. :(
Melissa@CCI
08-16-2007, 10:08 PM
Hey, I'm not trying to mark you as a bad seller, but that is a Stage 1 pressure plate. Plate load is only about 200 lbs heavier than stock.

You probably didn't know, so I wanted to give you a heads up. Its not going to hold nearly as much power as the Stage 4 pressure plate will....
Annihilation
08-17-2007, 01:23 PM
Hey, I'm not trying to mark you as a bad seller, but that is a Stage 1 pressure plate. Plate load is only about 200 lbs heavier than stock.

You probably didn't know, so I wanted to give you a heads up. Its not going to hold nearly as much power as the Stage 4 pressure plate will....


Yea I know I never said it was a stg4 PP. I stated it is the same Clutch Disc
I forgot to put wat stg PP it was.... Thanks for reminding me :yes:
Annihilation
08-19-2007, 09:42 AM
My # 404-488-3358 leave a MSG if no answer