1990 300zx twinturbo project car...

[run4cover]

This car needs an engine harness, to be complete (and run)....It has a low mileage JDM motor freshly swapped in (engine has never ben run since in the car...aprrox. 2 weeks now). The reason I'm selling it is; I'm tired of dumping money into this car, it's perfect for some one that wants a semi-project car with all the upgrades done to it.....for a steal. Here is the mod list, do some research and see how much I have thrown away in this car:

JDM engine (25,000 km)
JWT dual pop and ecu
740cc NISMO injectors
Fidanza flyweel (brand new fricition material)
ACT 6-puck clutch (brand new pressure plate)
SSQV blow off valves (HKS knockoffs...mounted in the stock recirc spots)
Greg dupree split down pipes
T28/25 turbos
ported stock exhaust manifolds (ported by me....~10hours labor per manifold)
stillen 1/4 pipes
custom 3" cat back with magnaflow mufflers (no cats, or resonators)
Z1 motorsports 1 piece aluminum driveshaft
Apexi avc-r
ASP underdrive crank pully
chrome hard pipes
greddy intercoolers

On my old engine (low compression in two cylinders), this combination netted 386rwhp @ 1.0 bar, and 426rwhp @ 1.25 bar with a slipping clutch. With a clutch that holds, the car will make between 430 and 450rwhp at 18psi on pump gas. Everything listed is either brand new, or has ~1100 miles on it. I have all receipts of work performed on the car that I didn't do myself. I also have for sale, either with or without the car, the following:

topspeed 2 1/2" stainless exhaust with titanium mufflers (brand new)

NOS wet nitrous kit (300zx specific....brand new)

MSD window switch (brand new)

Everything listed above dyno figures is included with the car.....everything in the pictures are included EXCEPT the rims and tires....they are not for sale! I do have some cheesy chrome 16 in. rims, but they need new tires, because the ones on it, eventhough good, have flat spots from sitting in one place for 2 years.

Now....for the price......I'm taking the most REASONABLE best offer...I have the title and pen in my hand. Direct any questions to Alonzo @ 770-316-5571 to arrange a look at the car, or ask any questions and get more details. Thanks for reading.

http://i23.photobucket.com/albums/b378/run-4-cover/newshoes01.jpg

http://i23.photobucket.com/albums/b378/run-4-cover/newshoesside.jpg



http://i23.photobucket.com/albums/b378/run-4-cover/bronze18.jpg

[run4cover]

Oh yeah, to clearify...the car does not run...will turn over a burble for about 3 seconds, bt won't run. There is no spark getting to #2 cylinder....but that shouldn't stop it from running.

[chnco]

so it needs a harness, how does it even crank?

[shizzy0786]

how much

[civic95]

so it needs a harness, how does it even crank?

werd! sweet look Z though (minus the spoiler)

[DRFTR]

lets start the bidding at 1k dollars :)

[BlackDubs]

Thats a nice Z.

[DRFTR]

no doubt..a very nice z...so is anyone else goin to offer on the car...so what is a reasonable offer for a 1990 300z that doesn't run anyways?

[shizzy0786]

i woudlnt pay that much
prolly 1500 max not tryign to low ball just saying
but i lookign for an auto so i cant buy it

[shizzy0786]

how much woudl u sell the rims and the body kit with the spoiler for?

[TallGuy]

so whats the best offer?

[A.P. Photography]

So you are quoting hp numbers on your old engine and not this one. You have no idea how much this one will make (as in documented) correct? These are all just guesses.


Also the body looks pretty good but would sell better if you left the rims on it. They actually make the car, either that or put the chrome wheels on and then take pics of it. :goodjob:

[D Dysinger Racing]

yeah so whats the highest or most reasonable offer? the rims do make the car btw...

[crxsiguy]

interested in any trades??

[Buford®]

How many miles on the car, and do you have the stock TT wheels?

[TommyD1919]

Ok how much, you have my interest and I have some money to spend so give me a price Thanks

[run4cover]

sorry, haven't been checking here.....ok...to answer a few questions....
1) the car needs a harness because i traced #2 not getting spark to the harness...that's what I do.

2) why wouldn't it turn over...I didn't say the whole harness is bad, but you would have to pull the engine to get to the harness....if your taking it out, why not just put a new harness in.

3) as for guessing HP figures...not!!! I have dynos of this same set-up on my old engine...this is a low mileage engine with good compression in all cylinders...why wouldn't it make the same power? My clutch slipped on the 426rwhp pull...it was headed for the 430-440rwhp range.

4) the car is worth at a minimum $5G's.....someone could part the car out with all the upgrades I have for more than $5g's....all parts are either brand new or has about 1100 miles on them...I just paid $2000.00 for the JDM engine (25k's as told to me...it's pretty clean).

5) I'm not selling any pieces...it's a package deal.....I have some pics of the car with the chrome rims.....yes, the 18" bronze ones on these pics look better than the 16" chrome ones....and I do have the original wheels.

6) I'm more interested in trading for; 240sx (S14 or S13 coupe only), 1 or 2G DSM GS-x, Mr-2 turbo, or a 600-750cc sport bike.

Sorry for the delay, thanks for the compliments and interest.

[crxsiguy]

ok well I am offering to trade my 2G GSX give me a call and we might work something out.... 404 207 2503 ~mike