PDA

View Full Version : Anyway to fix IACV???



southside
08-01-2007, 07:16 PM
My car has had small stuff messin up lately im guessin since the person that had it b4 me really didnt give a shit about the car they didnt replace small stuff like sensors but my friend checked the code that being thrown and he said one code was tps and the other iacv which wont let me car rev over 2500 rpm is there anyway i can fix the iacv

iEvo
08-01-2007, 07:17 PM
yea buy a new 1

southside
08-01-2007, 07:19 PM
yea buy a new 1good one i had question for you did the evo in yo avatar is that the one u wrecked i seen them pics and was llike damn i hope that aint it

allmotoronly
08-01-2007, 09:23 PM
yea buy a new one. the IACV wont keep you from revving over 2500 rpm though... it will make you idle really high. The TPS is probably the problem with it not revving high, since the ecu probably is getting a signal that says the throttle is closed when it is actually open, and it limits the fuel injectors.

btw, wtf is that ghetto rigged intake? you probably lost hp on that one. definitely did not smoothe the air flow any.

allmotoronly
08-01-2007, 09:25 PM
and where is your pcv valve?

southside
08-02-2007, 11:43 AM
yea buy a new one. the IACV wont keep you from revving over 2500 rpm though... it will make you idle really high. The TPS is probably the problem with it not revving high, since the ecu probably is getting a signal that says the throttle is closed when it is actually open, and it limits the fuel injectors.

btw, wtf is that ghetto rigged intake? you probably lost hp on that one. definitely did not smoothe the air flow any.I replaced the tps and it still wouldnt rev over 2500rpm so i took of my iacv i think the codes that were being thrown were 7 and 14 i cant remember but the tps was put on yesterday and didnt solve the problem

SLo_MKIII
08-02-2007, 11:50 AM
I replaced the tps and it still wouldnt rev over 2500rpm so i took of my iacv i think the codes that were being thrown were 7 and 14 i cant remember but the tps was put on yesterday and didnt solve the problem

i am having similar problems i was reading a whole bunch of stuff last night about it and i would try pulling the iac and cleaning it with some MAF cleaner. ist about 6 bucks at any auto store jus my:2cents:

speedminded
08-02-2007, 12:34 PM
and where is your pcv valve?Like physically where is it?

southside
08-02-2007, 01:51 PM
i am having similar problems i was reading a whole bunch of stuff last night about it and i would try pulling the iac and cleaning it with some MAF cleaner. ist about 6 bucks at any auto store jus my:2cents:i took it off but didnt see like no where to clean except under the bottom where the 3 bolts are where else is there to clean somone else told me it could be distributor but i got code 7 and 14 i just replaced the tps tho and it hasnt went off yet and 14 is iacv i dont kno

EmminoDaGreat
08-02-2007, 01:54 PM
Probably the FITV on the bottom of the throttle body.

speedminded
08-02-2007, 02:02 PM
Probably the FITV on the bottom of the throttle body.That won't make it top out at 2,500, just be a high and/or fluctuating idle...sounds like the ECU is in "limp/safemode" for some reason.

JDM onlyy
08-02-2007, 02:48 PM
I replaced the tps and it still wouldnt rev over 2500rpm so i took of my iacv i think the codes that were being thrown were 7 and 14 i cant remember but the tps was put on yesterday and didnt solve the problem

7 is TPS and 14 is IAC. Did you reset your ecu to see if will come off or if it will come back on? CEL I mean...

southside
08-02-2007, 04:01 PM
7 is TPS and 14 is IAC. Did you reset your ecu to see if will come off or if it will come back on? CEL I mean...HOW DO YOU RESET it i took the battery cable off or watever and put it back on and it did nothin i have a check engine light but its been on since i bought the car

speedminded
08-02-2007, 04:04 PM
HOW DO YOU RESET it i took the battery cable off or watever and put it back on and it did nothin i have a check engine light but its been on since i bought the carThe check engine light means it's throwing a code, the only two codes you have is 7 and 14?

southside
08-02-2007, 05:52 PM
yes that is the only code i think maybe i counted wrong ive got one long blink 4shorts and 7 quick blinks

1SOL2NV
08-02-2007, 06:08 PM
well do wut the EX owner didnt do .. Replace them sensors .. and call it a day ... junkyard will be your friend .. or jus buy them new

southside
08-02-2007, 06:24 PM
yea i been getting around to gettin em all now but sensors arepretty expensive

green91
08-02-2007, 07:24 PM
seeing how youve got a LS in an EF and both the TPS and IACV require wiring modifcations id start by checking the wiring.

southside
08-02-2007, 09:32 PM
seeing how youve got a LS in an EF and both the TPS and IACV require wiring modifcations id start by checking the wiring.seeing that was alreadi done and i alreadi did it so :thinking: wat else can u think of smart ass

allmotoronly
08-02-2007, 10:05 PM
HOW DO YOU RESET it i took the battery cable off or watever and put it back on and it did nothin i have a check engine light but its been on since i bought the car

you have to leave the positive cable unhooked for a while, maybe 5 minutes???

1SOL2NV
08-02-2007, 10:35 PM
yea 5 minutes should be plenty ...

green91
08-03-2007, 06:02 AM
seeing that was alreadi done and i alreadi did it so :thinking: wat else can u think of smart ass

i wasnt being a smart ass, the sensors dont typically go bad and especially not at the same time asshole. so checking the wiring would be a good place to start. but good luck fixing it dickhead. youre obviously pretty smart

southside
08-03-2007, 08:19 AM
i wasnt being a smart ass, the sensors dont typically go bad and especially not at the same time asshole. so checking the wiring would be a good place to start. but good luck fixing it dickhead. youre obviously pretty smartI been checked the wires so that isnt the problem

RBS
08-04-2007, 10:38 PM
just a thought, but try switching the TPS and IACV plugs see if it does anything :2cents:

scttydb411
08-05-2007, 12:00 AM
just a thought, but try switching the TPS and IACV plugs see if it does anything :2cents:

can't...tps is 3 wire and iacv is 2 wire plugs. good try though.