View Full Version : wtb b series engine parts
inutero93
08-01-2007, 02:23 PM
im rebuilding my poor mans type r which is a gsr with a b16 head . im going na .. wanting to see if any body has anything for sale
im keeping the stock bore so it has to be 81mm thanks
aftermarket or stock but has to be real low miles or new
pistons
rods
cams
valves springs etc
thanks
Annihilation
08-01-2007, 02:41 PM
I got CTR CAMS with Hayame Adjustable Cam Gears $400/both or $275 for cams only
Or complete b18c motor
P73 Intake
B16 Ported head
Dual Valve spring and retainers
PIstons: SRP 11.0:1 Compression .020 over
Rods:
P72
Machined
Shotpeened
weighed
ARP Rod bolts
Crank: Balanced, Micropolised
new bearings and rings, ZERO miles
$1750
The BUCKY
08-01-2007, 02:46 PM
i have a gsr block
cp 82mm pistons 11.5:1 comp
crower crank and rods 95 stroke
needs new crank bearings
like 400miles on it all
$1k
xbn83
08-01-2007, 03:20 PM
Brand new OEM ITR rods $170
4 Used GSR pistons and 3 rods in good shape, around 60k $50
Used 1 set of Comp Cams around 7k in very good shape $250
I also have a set of USDM stock bore ITR pistons but have scratches on the skirts, I have to let the machine shop inspect them and see what they say before I could sell it.
Blox intake manifold (Skunk 2 replica) used for roughly 200 miles before I switched to Victor X $120
First I planned to do high compression NA, but I changed my mind so I went with forged internals to do turbo.
inutero93
08-02-2007, 10:43 AM
how many miles on the cams
I got CTR CAMS with Hayame Adjustable Cam Gears $400/both or $275 for cams only
Or complete b18c motor
P73 Intake
B16 Ported head
Dual Valve spring and retainers
PIstons: SRP 11.0:1 Compression .020 over
Rods:
P72
Machined
Shotpeened
weighed
ARP Rod bolts
Crank: Balanced, Micropolised
new bearings and rings, ZERO miles
$1750
inutero93
08-03-2007, 12:25 PM
up
inutero93
08-04-2007, 07:54 AM
up
inutero93
08-06-2007, 08:09 AM
up
Annihilation
08-06-2007, 10:26 AM
sorry cams sold to someone else a couple days ago when i posted on this thread..
Grimm Reeper
08-06-2007, 02:34 PM
I have stock Si cams
xbn83
08-06-2007, 11:29 PM
To add, I have a set of GSR stock cams $50 obo
Tech5
08-06-2007, 11:43 PM
<<< Just throwing this out, I have a 2000 Si Tranny 50k miles, asking 650 OBO
lshatchcx18
08-06-2007, 11:53 PM
pm sent
soplocar
08-08-2007, 04:20 PM
hey i got an exedy stage 2 clutch with exedy flywheel, slightly used, a lot of meat left on the disc, 300 for both. perfect for NA.
bernard
08-09-2007, 06:19 AM
Fool you need to get those euro Type r pistons from jose. Straight nasty man. And don't worry im going to be building a Na motor too just so that i can spank u. Straight nasty. LOL!!
madwick
08-09-2007, 08:50 PM
i have stock gs-r bottem end internals (needs piston rings and bearings) and stock b16a valve train.
boostedy8
08-10-2007, 07:54 PM
I have a set of 81.5mm srp pistons w/ arias rings I will sell you for $100 obo. The compression is about 11.5 to 1. They were only used for about 5K. And I have a ste of crower stage II N/A cams I want $140 OBO. Let me know 4043745881:goodjob:
blown
08-13-2007, 10:03 AM
just throwin this out tooo
i got a set of b16 je 9:1 pistons with b16 eagle rods and arp main stud almost new codition for 500 and a b16 block with golden eagle block guard for extra 50 and a itr lsd tranny for 700 pm me if you want any
i4_garage
08-13-2007, 01:46 PM
i got Eagle rods and JE piston for a GSR LMK, they are used but good.
lsxtreme
08-13-2007, 04:09 PM
i got skunk2 valves, and crower titanium retainers/ dual valvesprings.. bnib search my thread.. and pm me a offer i wont refuse.. lmk something..
vick
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.