PDA

View Full Version : KA VRS SR........ the battle is over. the winner has been chosen



lemansz
07-12-2005, 11:49 PM
KA VRS SR........ the battle is over. the winner has been chosen



for a long time now KA and SR battle has been at the top of the bigboosting charts for most arguable...... uh ..... argument




SO!


i took it into my own hands to see wich is better...... i was not biased in any way during the competition. i treated both cars the same. 100% ragging


both cars are identicle.. highly tuned Nissan S13 coupe platforms....



ONE with a KA (now dont think this is the single cam KA.. this is infact the mightly DUAL CAM 2.4 powerhouse AND! TQ monster)

ONE with a SR (with .4 LESS i repeat LESS L of displacement... u can go ahead and consider the SR a underdog.... because remember... dusplacement is everything)




its kinda tuff to tell wich is better in the video.... because of corse there so evenly matched as many will say.



but you decide.



http://www.charlestonracing.com/pic/srvska.wmv





the battle is over. the war has been WON.....


courtesy kingleh www.gscmotorsports.com

JITB
07-12-2005, 11:53 PM
lol...why hate the ka...

lemansz
07-13-2005, 12:18 AM
i nominate for video of the year

SLOWR/T
07-13-2005, 09:18 AM
i think you could say the SR had an UNfair advantage.

uproot
07-13-2005, 09:28 AM
dang thats a close call...

1439/2000
07-13-2005, 10:20 PM
yes sr owns ka. a rod knocking sr would bust a ka's ass.

lemansz
07-14-2005, 03:06 PM
SRRRRRRRRRRRRRR fuct chea!

flysi00
07-14-2005, 03:38 PM
yay sr power

AltimaCharlie
07-14-2005, 04:25 PM
that really didn't prove anything. the ka car was a dump. rb kicks ass anyway

lemansz
07-14-2005, 05:17 PM
that really didn't prove anything. the ka car was a dump. rb kicks ass anyway

its obvious that you MISSEd the point.

kak

auxiliary
07-15-2005, 10:45 AM
I rather have a turbo SOHC instead.

HalfBaked
07-15-2005, 11:21 AM
that really didn't prove anything. the ka car was a dump. rb kicks ass anyway


As long as that rb isn't an rb20. Because well than it just blows ass.

SilviaK93
07-15-2005, 01:23 PM
I rather have a turbo SOHC instead.

HAHAHAHA, thats funny! Maybe you just wanna be different I guess..:goodjob:

phantom_hatch
07-15-2005, 07:58 PM
that shit is gay put a built sr vs a built ka not a blown ka vs a good running srand see what happen.

auxiliary
07-15-2005, 11:57 PM
HAHAHAHA, thats funny! Maybe you just wanna be different I guess..:goodjob:

uumm...I rather have a sohc turbo instead of a dohc turbo.

how is that different? Lots of smart people do it and make lots of power. I don't see a problem there.

lemansz
07-16-2005, 03:28 AM
kaks allll kaks

SilviaK93
07-17-2005, 01:49 PM
uumm...I rather have a sohc turbo instead of a dohc turbo.

how is that different? Lots of smart people do it and make lots of power. I don't see a problem there.

WHY?:confused: because it has no real power like the SR or a DOHC KA-T. Yes it can be done and yes it can make some good power but you are so limited that you should go dual cam.

I love the above comment of " smart people do it.":rolleyes: Well how many "smart people" with a SOHC KA-T make over 400rwhp?:doh: There are more than enough SR's and DOHC KA-T's doing it, so help me understand that one.

I seem to recall making 396rwhp@5200 on a slipping clutch; dont think many SOHC guys have been there. :thinking:

HalfBaked
07-17-2005, 05:43 PM
You know there are guys with 300whp NA out of SOHC??

lowjack
07-18-2005, 09:17 AM
that shit is gay put a built sr vs a built ka not a blown ka vs a good running srand see what happen.

I would also agree.... My 96 240 (sold car) turbo's KA was tailored afters Chris Mays and at 11 psi 308 whp was made with stock internals, JWT ECU, T3-04 Hybrid, 550lbs injectors, Cobra MAF, Spareaco Intercooler, etc. I would take a Iron Block any day over the SR.

Chris's pulled a 437whp at 21 psi. Bored 20% over with Aries Pstons, Carillo Rods, Ferra Valve sprins/retainers, etc. Oh and he won Dyno wars in 2002 at Nopi Nats, going up against a onlaught of others including a SR20DET 240....

Taking a KA built right the SR would have a hard time......Needless to say this thread is utter shit until you use a couple of cars worthy, instead of showing a burnt out over the hill greased up KA motor......

HiPSI
07-18-2005, 11:43 AM
You know there are guys with 300whp NA out of SOHC??


show me these.

SilviaK93
07-18-2005, 12:03 PM
I would also agree.... My 96 240 (sold car) turbo's KA was tailored afters Chris Mays and at 11 psi 308 whp was made with stock internals, JWT ECU, T3-04 Hybrid, 550lbs injectors, Cobra MAF, Spareaco Intercooler, etc. I would take a Iron Block any day over the SR.

Chris's pulled a 437whp at 21 psi. Bored 20% over with Aries Pstons, Carillo Rods, Ferra Valve sprins/retainers, etc. Oh and he won Dyno wars in 2002 at Nopi Nats, going up against a onlaught of others including a SR20DET 240....

Taking a KA built right the SR would have a hard time......Needless to say this thread is utter shit until you use a couple of cars worthy, instead of showing a burnt out over the hill greased up KA motor......


With all due respect to Chris May's amazing car, BUT that thing spent more time on the lift then it did on the street. Very impressive car when it was running though.

My setup was setup to be in that hp range you stated above with May's car. I feel as if mine would have been alot more reliable too.:goodjob: But who am I to talk I sold the car before it had a good clutch. :(

SilviaK93
07-18-2005, 12:03 PM
You know there are guys with 300whp NA out of SOHC??

NOPE, but would love to see one if you can show me one?

HalfBaked
07-18-2005, 12:44 PM
Can't find the link right now.

But I doubted it too. Guy I know told me he was going to build his SOHC NA and I said that was the most retarded thing ever, and he showed me the link to a few guys who had basiclly fully built the SOHC and made over 300. It looks like it'd take a ton of money but for what he wanted out of the car I guess it made sense.

DrivenMind
07-18-2005, 09:20 PM
I'd say it was pretty close...

b18civicdx
07-18-2005, 11:23 PM
http://www.mountainboost.com/videos/fast240.MPG

461whp KA-T

silviadriftr
07-19-2005, 09:49 AM
http://www.mountainboost.com/videos/fast240.MPG

461whp KA-T

http://www.mountainboost.com/415/silvia.wmv

360whp SR(updated specs in sig) and ran 7.50 in the 1/8th. Funny how you see all these over 500whp sr's and ka's in vids on the dyno but never at the track, and only one fully streetable s13 chassis cars in the 10's(not mine yet :D )

SilviaK93
07-19-2005, 12:28 PM
http://www.mountainboost.com/videos/fast240.MPG

461whp KA-T

1/8 mile....whats the point of that knowing you he has lag? strong car still!

silviadriftr
07-19-2005, 12:36 PM
1/8 mile....whats the point of that knowing you he has lag? strong car still!

lag=problem
2 step= solution

My reason for running 1/8th mile is to get the launch down or where we make changes to the car for upcoming events. :)

MSTANGSALEEN
07-19-2005, 01:19 PM
ok isnt there a few sr's,like the blue bird and what not or the s13 is different then the s15,210hp or 250hp.

silviadriftr
07-19-2005, 02:28 PM
ok isnt there a few sr's,like the blue bird and what not or the s13 is different then the s15,210hp or 250hp.

yes.
s13 red top rwd
s13 black top rwd
s14 black top rwd
s15 rwd

are the different sr20det rwd motors.

b18civicdx
07-19-2005, 11:09 PM
brian i was lookin for that vid of your car...good comparison. Hey, you coming this weekend?

SampaGuy
07-19-2005, 11:26 PM
dude whats wrong with u, stop hating on the ka
why dont u pick on hondas or something, this is like ur dissing ur own family, u should share love with all 240s, omg.

in case ur wondering, yes, i have a sohc KA and it beats the hell out of any sr20 (in gas consumption lol)


btw, CA18 owns all (displacement isnt everything, like u said in ur vid)

MSTANGSALEEN
07-20-2005, 03:26 PM
can someone tell me why a sohc is better then a dohc?

SilviaK93
07-20-2005, 05:20 PM
can someone tell me why a sohc is better then a dohc?

it's not

silviadriftr
07-20-2005, 08:21 PM
can someone tell me why a sohc is better then a dohc?


It's better used as a paper weight!!!!!!!!!!!!!! :D

silviadriftr
07-20-2005, 08:23 PM
brian i was lookin for that vid of your car...good comparison. Hey, you coming this weekend?


No, the machine shop screwed up one or the bronze guis=des when they were putting it in. The other will be at the shop tomorrow, but I probably won't have it done by this weekend. I was hoping so but it will p[robably be ruunning at Dallas next weekend if everything goes well.