PDA

View Full Version : d16a1( dohc zc )


Tree
07-27-2007, 08:12 PM
where can i find a new or used d16a1 dohc valve cover?? i got the dohc swap for my car and i hate the valve cover...

thanks
dorin48
07-27-2007, 10:45 PM
All ur gonna find is stock, stock and.... stock. That specific engine is fairly different from its D series cousins and doesnt really have after market support.
Papa_Smurf
07-27-2007, 10:49 PM
just paint that bitch, or PM bucky and he'll do it for ya.

oh yea, ZC FTMFW!!!
Tree
07-28-2007, 12:12 PM
who's bucky and how much would it be to get it done?
Papa_Smurf
07-28-2007, 12:20 PM
his name is "Bucky" , just pm him, tell him you want to get you DOHC ZC valve cover painted and you heard he is the best :goodjob:.

Or just call the number on my sig, thats his company, Superstar Customs.
Tree
07-28-2007, 12:28 PM
ok man i will thanks man... when i call do i just ask for "bucky"?
Tree
07-28-2007, 12:37 PM
i found pic of the vc that he did i like his work... i think i want to get my painted i just need to find out of much and how long it will take for get it done!!! thanks for your help!! would you know what the number are of the zc?
Whiteboy™
07-28-2007, 12:42 PM
Bucky is the man in this case!
Tree
07-28-2007, 09:27 PM
so i hear i gave him a call he said 80 to get it painted, but i want to get a stock one.... where can i get them at? ( i'm lookin to have 2 v/c one painted and one stock)
StraightSix
07-28-2007, 09:51 PM
You should be able to find a D16A1 valve cover on an 86-89 Acura Integra LS. However, the D16A1 is not a ZC. There are some subtle differences between the two engines. I suspect that the A1 valve cover would fit a ZC, but I haven't tried it, nor do I know any who has.
Papa_Smurf
07-29-2007, 11:19 AM
would you know what the number are of the zc?

if by numbers you mean specs, then it's 137hp for an obd1 and maybe 127 for an obo( not sure about the obdo, because mines obd1). Thats to the flywheel.

On the dyno... lol you're lucky to get 120 out of a stock DOHC OBD1 ZC :(.
dorin48
07-30-2007, 01:33 PM
A d16a1 is a brown top, (aka bastard ZC) I believe your engine is rated at 116 hp or something like that. Its not really the DOHC ZC that is more popular. It would say ZC on the block (JDM) if it was or, D16A8 or D16A9 from Europe (A8 is FI w/ a cat | A9 carbed and w/o cat)


Start here ----> The ZC Resource (http://www.thezcr.com)