dtmcnamara
07-22-2007, 09:16 PM
Ok I have an few cars for sale. All havent been used in the past 6-8 months so I am getting rid of them.
1st is the EVO. Has a Slot-it chassis with a hard body evo skin. Also has a Falcon 46K motor. VERY fast. The reason there is the aluminum tape on the motor is because the engine get so hot that i needed to direct the air into it to cool it down. The motor got so hot once it melted the plastic on another chassis.
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02630.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02631.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02632.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02633.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02634.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02635.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02636.jpg
2nd is a cheap starter chassis made by HORNBY. I think one of the motors in the case work. WELL I KNOW ONE WILL WORK, but make take some cutting but thats all ride.
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02637.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02638.jpg
Finally I have a SCX F1 car half built. THe entire chassis is there and the brushes are there along with rear tires and a few axel gears. Needs motor body and front tires.
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02639.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02640.jpg
I also have a box full of stock motors for slot-it cars, but they all work the same. also int he box is extra wire, a few magnets, some engine oil, and some brush oil. Everything will be in a tackle box case. Looking to get $75 obo for the entire setup.
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02628.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02629.jpg
404-725-4979
[email protected]
DAVID
1st is the EVO. Has a Slot-it chassis with a hard body evo skin. Also has a Falcon 46K motor. VERY fast. The reason there is the aluminum tape on the motor is because the engine get so hot that i needed to direct the air into it to cool it down. The motor got so hot once it melted the plastic on another chassis.
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02630.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02631.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02632.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02633.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02634.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02635.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02636.jpg
2nd is a cheap starter chassis made by HORNBY. I think one of the motors in the case work. WELL I KNOW ONE WILL WORK, but make take some cutting but thats all ride.
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02637.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02638.jpg
Finally I have a SCX F1 car half built. THe entire chassis is there and the brushes are there along with rear tires and a few axel gears. Needs motor body and front tires.
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02639.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02640.jpg
I also have a box full of stock motors for slot-it cars, but they all work the same. also int he box is extra wire, a few magnets, some engine oil, and some brush oil. Everything will be in a tackle box case. Looking to get $75 obo for the entire setup.
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02628.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC02629.jpg
404-725-4979
[email protected]
DAVID