B & D series performance parts and Turbo parts

[Vuongy_Dong]

No Lowballing. Most of the stuff is OBO.


GSR Revhard intercooler and pipings. Comes with greddy BOV. $375 obo SOLD!!!

http://i211.photobucket.com/albums/bb20/vuongy/intercoolerkit.jpg
http://i211.photobucket.com/albums/bb20/vuongy/BOV.jpg


SFP B series turbo manifold and Greddy 40mm wastegate. 9psi spring in it. Wastegate arm on the manifold cracked before due to heavy wastegate. Has been re-welded and braced ever since. $275 obo SOLD!!! ( Turbo has been sold )

http://i211.photobucket.com/albums/bb20/vuongy/turbokit.jpg
http://i211.photobucket.com/albums/bb20/vuongy/turbomani.jpg


GSR JG Edelbrock IM. Aem fuel rail, RC550cc injectors, pressure gauge, TB, IAC. Complete! Old school manifold with the Edelbrock lettering. gangsta. hard to find. $575 or GIVE ME SOME OFFERS! SOLD! ONLY FUEL RAIL LEFT

http://i211.photobucket.com/albums/bb20/vuongy/jgmanifold.jpg


Stock GSR IM. came off a 2001 GSR. Bare $60

http://i211.photobucket.com/albums/bb20/vuongy/stockIM.jpg


Red JDM B series valve cover with Comptech oil cap and Comptech spark plug cover. Uncut $220 VALVE COVER SOLD. COMPTECH LEFT.

http://i211.photobucket.com/albums/bb20/vuongy/comptech.jpg
http://i211.photobucket.com/albums/bb20/vuongy/comptech1.jpg


Integra custom gloss black glove box frame. will house your apexi vafc, avc-r, or safc and 2 gauges in your glove box. $20 firm

http://i211.photobucket.com/albums/bb20/vuongy/integraglovebox.jpg


Aeromotive FPR with lines to directly bolt up to aem or aftermarket fuel rails. $150 firm
http://i211.photobucket.com/albums/bb20/vuongy/FPR.jpg


Greddy profec B boost controller $150 SOLD!

http://i211.photobucket.com/albums/bb20/vuongy/greddyebc.jpg


B series half shaft $80

http://i211.photobucket.com/albums/bb20/vuongy/halfshaft.jpg


Indigo 9lbs B series flywheel ( dirty. little rust from sitting. ) $100

http://i211.photobucket.com/albums/bb20/vuongy/indigoFW.jpg


3 Bar map sensor $30

http://i211.photobucket.com/albums/bb20/vuongy/3bar.jpg


GSR MSD 8.5mm wires. used $40 SOLD

http://i211.photobucket.com/albums/bb20/vuongy/msdwires.jpg


OBD1 P28 hondata chipped. something is wrong with the ecu. AS IS $30 SOLD!

http://i211.photobucket.com/albums/bb20/vuongy/P28.jpg


GSR 2.5 test pipe with o2 bung $30

http://i211.photobucket.com/albums/bb20/vuongy/testpipe.jpg


DC2 JDM conversion fenders. Brand new. ( fiberglass ) $200 obo

http://i211.photobucket.com/albums/bb20/vuongy/dc2fender.jpg


Integra benzel $15

http://i211.photobucket.com/albums/bb20/vuongy/dc2benzel.jpg


D16Z6 bare block with crank. Block is bored, honed, and decked. Crank is micropolished. was assembled, but never driven on. o miles. $150

http://i211.photobucket.com/albums/bb20/vuongy/engine5.jpg
http://i211.photobucket.com/albums/bb20/vuongy/engine1.jpg
http://i211.photobucket.com/albums/bb20/vuongy/engine3.jpg
http://i211.photobucket.com/albums/bb20/vuongy/engine7.jpg


D16Z6 New Vitara 9.1 pistons and new Eagle rods. will come with acl bearings. was assembled, but never ran on. $300 firm its like buying rods and getting pistons for free.

http://i211.photobucket.com/albums/bb20/vuongy/rods1.jpg
http://i211.photobucket.com/albums/bb20/vuongy/rods3.jpg


D16Y8 built head. Halfwit's old head. Skunk 2 cams with dual springs and retainers. comes with the distributor. $280 SOLD!

http://i211.photobucket.com/albums/bb20/vuongy/z6head.jpg


D series SI cable tranny? $90 SOLD!

http://i211.photobucket.com/albums/bb20/vuongy/sitranny.jpg


PM6 ecu $50

http://i211.photobucket.com/albums/bb20/vuongy/PM6ecu.jpg


D series alternator $25 SOLD

http://i211.photobucket.com/albums/bb20/vuongy/alternator.jpg


D series axles $80

http://i211.photobucket.com/albums/bb20/vuongy/axles.jpg


98-02 accord Intrax drop springs $100 obo

http://i211.photobucket.com/albums/bb20/vuongy/INtrax.jpg

98+ accord stock springs and struts. struts are not blown. $80

http://i211.photobucket.com/albums/bb20/vuongy/stockaccordsprings.jpg


5.6 LCD monitor $20

http://i211.photobucket.com/albums/bb20/vuongy/56lcd.jpg


Monster cap $40

http://i211.photobucket.com/albums/bb20/vuongy/monstercap.jpg


H22 internal coil distributor. Brand new $125

http://i211.photobucket.com/albums/bb20/vuongy/h22dist.jpg
http://i211.photobucket.com/albums/bb20/vuongy/h22dist1.jpg


AEM bypass valve for air intakes $40 firm.

http://i211.photobucket.com/albums/bb20/vuongy/aembypass.jpg


EK CF front lip. brand new $150


http://i211.photobucket.com/albums/bb20/vuongy/eklip.jpg



I can be reached at 770-374-9449 or PM me.

[vubuilt]

shouldnt have any problems selling these things.

:cheers: for vitara pistons

[Sneezin]

hmm...nice stuff free bump

[Crx91]

Pm'd about turbo parts i want em

[WhiteAccord]

Bump for you...

[WhiteAccord]

Bump for Vuong, an awesome and trustworthy guy!

[Andy099]

how much ju for the valve cover minus the cap and spark plug cover

[Vuongy_Dong]

Andy099 clear your PM's!

[lxpaulxl]

Bump for Vuong, an awesome and trustworthy guy!

Haha oops, that was me.

[cactusEG]

great stuff and not bad of a price

[DamnDisLaOsBoY]

ey if u dont sell the test pipe later... ill pick it up...

[Vuongy_Dong]

^^^sure

[Sileighty911]

like what is the ECU doing for it to be something wrong with it.

[azianhustla]

How much for just the Intercooler.. let me know!

[LSTurboHatch]

willing to part the injectors?

and what is up with the ecu

[Vuongy_Dong]

$200 for the injectors if i were to part it out.

[kain86]

Thanx for the Awesome head Voung........or should i thank halfwit.....lol bump for you!

[1SOL2NV]

vitara pistons compression is 8:5:1 in a z6 .. jus to let people who dont know ... so perfect for drag+boost .. bump for jooo

[calboi]

will that tranny fit a d16y8

[Vuongy_Dong]

will that tranny fit a d16y8
it'll fit it. its a cable tranny.

[Vuongy_Dong]

vitara pistons compression is 8:5:1 in a z6 .. jus to let people who dont know ... so perfect for drag+boost .. bump for jooo
thanks for the info. :goodjob:

[delsolnohoe]

whaz sup with that front lip how new is it do it got any nicks on it !!!

[WhiteAccord]

its pretty new never been mounted... no nicks...

[Vuongy_Dong]

whaz sup with that front lip how new is it do it got any nicks on it !!!
brand new!

[AnTi-PooN]

ill give you 150 for the d series si tranny if you help me put it in

[Vuongy_Dong]

ill give you 150 for the d series si tranny if you help me put it in
I really dont have the time anymore. My full time day job and cars at night is swamped enough for me.

[Vuongy_Dong]

ttt

[Vuongy_Dong]

UPDATED!

[Vuongy_Dong]

prices updated!

[Andy_013]

what years will the EK CF front lip? 96-98 or 99-00

[MidLifeCrisis]

is the tranny a known good tranny?

[lshatchcx18]

pm sent

[Vuongy_Dong]

ttt

[punkr6]

I need that tranny........pm sent

[Vuongy_Dong]

Tranny sold earlier today

[lshatchcx18]

thank u bump

[Professor X]

Is the SFP manifold flanged for a T3 turbo?

[Vuongy_Dong]

updated!

[bernard]

Bump for some badazz parts and not price Jackin.:goodjob:

[pooter]

Do you still ave the rods and pistons for the d16z6??? Thanks again.

[hondacivic25]

hi i would like to buy ur fly wheel as soon as possible if still for sale
thanks zack > 7708802957

[n1accord]

Hey Vuong....Thanks again for the great deal on the stuff man!!!!!!!!!!!!!!!!!!!!!
I'll be coming back soon hopefully! lol