PDA

View Full Version : Where'd I go? Here's your explanation, plus some EF stuff for sale...



EvasiveEF9
07-19-2007, 06:26 PM
So ya'll have been wondering what I've been up to? LoL. I'm feelin' the love...

I've mostly just been busy, lately. School time is approaching, and I'm not at all prepared. I'm a student at NGCSU and in the corps of cadets. I've been working my ass off trying to afford it. I don't think ends will meet, so I'll be transferring to Chatt. Tech. I just haven't been on here much cuz I've lost some of the hype of building cars and...most everything, LoL. No...I'm not dropping my project, I'm not quitting cars...

However, on that note, I AM taking a half-step back. I'm slowing up on my project with the civic, for the moment. Just looking for another hobby. As stated, not selling the civic, or anything like that. But right now I'm focused on a series of events.

1. Getting an AR15 (a rifle similar to the M16 used by the military...it just doesn't have the "full auto" option)
2. Working on getting that JDM Halfcut up here (I'll be selling the b16 and it's tranny and all the other parts from it, in time.
3. I want my garage back...so I'm selling most of my EF stuff and DA stuff off. I just need space, cuz I'm hoping to slide a jetski in here next year.

Parts I've got for sale are:

(2) sets of DA rear trailing arms for a rear disc conversion
Set of front DA spindles/calipers/etc
DA LS Booster
DA LS Master Cyl
4040 Prop
DA LS motor
DA LS 5spd tranny
DA Axles (and halfshaft)
(2) D15B2 motors
4spd STD d-series tranny
DA cluster (5spd)
Set of 14" 4x100 silver rims. No tires, and don't have a picture of 'em

Those are the main pieces. I'm about at the point I'm just taking offers on pieces. They must be reasonable, though, as I need the cash to put towards the guns and the ski.

No worries, ya'll, seriously. I'm not leaving the EF crew, or selling the car...just focused on things, so I've been off the net for a minute. I'll be back before you can start to miss me...

Oh, and if you want any of the parts I listed up there...give me a call on my cell. Leave a voicemail if I don't answer. You can try PM if you wanna... 404.452.2215

Whiteboy™
07-19-2007, 06:44 PM
me want rear disc brakes, pm me the price

Konstantin
07-19-2007, 08:55 PM
I'm very interested in the LS motor and tranny. Also, possibly axles.

Papa_Smurf
07-19-2007, 10:28 PM
I'll be back before you can start to miss me...

too late...

it's just not the same without the post whore :cry:

EvasiveEF9
07-19-2007, 10:58 PM
me want rear disc brakes, pm me the price
For rear trailing arms alone (discs, calipers, trailing arms, and E-brake cables) I'm looking to pull about 150$. All you would need is to get your 3540 or 4040 prop and the "90-91 CRx W/ rear disc" brake lines from autozone (like 10$ a side) and you're set. It's a GREAT upgrade...with or without the front integra brakes. Let me know if you want 'em.

I'm very interested in the LS motor and tranny. Also, possibly axles.
Well, just let me know.

too late...

it's just not the same without the post whore :cry:
Aww, no worries, homie. I'll be back, soon! Did you still need door hinges? LoL, I know it's been forever, but I've still got 'em...

Konstantin
07-19-2007, 11:16 PM
I left you a viocemail with my number about 2 hours ago, but don't hold me to exact time.

I'd like to come out and see the stuff and talk to you bout it some. Give me a call tomorrow after 10am, i'll be working but able to talk.

EvasiveEF9
07-19-2007, 11:38 PM
Expect a call, but I won't be able to meet up until saturday...afternoon-ish. Most all the parts are still in/on the car, so we should be good to go...

Catch you tomorrow.

Papa_Smurf
07-20-2007, 12:39 AM
Aww, no worries, homie. I'll be back, soon! Did you still need door hinges? LoL, I know it's been forever, but I've still got 'em...

Yes dude, i definatly still need thoes hinges for sure! You still have the driver side and passenger side?

oh dude... you've definatly got PM on that rear disc break swap.... i have money that sum other dirty whores dont have...:ninja:

EvasiveEF9
07-20-2007, 06:58 AM
Hahah, nice. Alright, well, when you wanna pick up the brakes? You can come by my house, or come by the shop.

BTW, if anyone need help installing these...I'e done them a time or two...

Papa_Smurf
07-20-2007, 10:46 AM
Pm'd evasive.

But where are the hinges? They still @ the shop? I might come by one weekend and get the hinges and the brake setup. I cant come by this weekend because I'm putting on sum HX side skirts.

i'll defiantly be posting pictures of how they look. :D

Black R
07-20-2007, 01:18 PM
also, (not to thread-jack) but I'm putting some siR front knuckles FS in the sticky thread for people who want fronts to compliment the rears you're selling. :)

EvasiveEF9
07-20-2007, 01:41 PM
LoL, BlackR, I never take offense from you. You're just asian like that...

But please let me get rid of mine, LoL. I need my garage back!

bigdare23
07-20-2007, 01:49 PM
also, (not to thread-jack) if you want bigger front brakes I have two sets of siR front knuckles - one with calipers and one without, so people who need an upgrade for front brakes as well can keep it balanced (since the fronts do most of the braking anyway):

************************************************** **************
siR knuckle set #1:

Left - has stampings on the back (LH3-A) and front (9GJ)
Right - has stampings on the back (RH#-A) and front (1CK)

The caliper mounting bolt holes are 5.5" from center to center.

There are no abs sensor mounting points on them.

They measure 16" from the top of the lower ball joint to the top of the knuckle where it mounts to the upper ball joint @ the highest point:
http://www.we-todd-did-racing.com/thumbs/large/1019101_3zic7/Picture%20077.jpg (http://www.we-todd-did-racing.com/view/full/1019101_3zic7)
http://www.we-todd-did-racing.com/thumbs/large/1019102_vbiki/Picture%20078.jpg (http://www.we-todd-did-racing.com/view/full/1019102_vbiki)


They measure 11.5" from the highest point to the upper caliper mounting bolt hole center:
http://www.we-todd-did-racing.com/thumbs/large/1019103_fnpru/Picture%20079.jpg (http://www.we-todd-did-racing.com/view/full/1019103_fnpru)


They measure 16 & 7/8" from the highest point to the lower caliper mounting bolt hole center:
http://www.we-todd-did-racing.com/thumbs/large/1019104_gxwb8/Picture%20080.jpg (http://www.we-todd-did-racing.com/view/full/1019104_gxwb8)

They measure 14 & 1/8" from the highest point to the tie rod mounting hole center:
http://www.we-todd-did-racing.com/thumbs/large/1019105_emhhb/Picture%20081.jpg (http://www.we-todd-did-racing.com/view/full/1019105_emhhb)


siR knuckle set #2:

Left - has stampings on the back (LH3-A) and front (9G4)
Right - has stampings on the back (RH#-A) and front (9G6)

The rest of the measurements are identical to set #1.

************************************************** **************

$200 per set of knuckles from me. :)


hey can you post that in the forsale thread, cuz if someone was in need of some they wouldnt really look in here :goodjob:

Black R
07-20-2007, 02:19 PM
fixed!