PDA

View Full Version : Z6 block, rods, turbo and EF shell



Vuongy_Dong
07-17-2007, 07:35 PM
This is what i have forsale:

D16Z6 Block - Block is bored, honed, decked. Crank is micropolished, was told by previous owner. Has new eagle rods, acl bearings, and supposely low compression 9.1 forged pistons.(maybe vitara pistons???) It doesnt look like forged pistons to me. I know its new. Motor was assembled, 0 miles on it. Couldnt get the car started, due to distributor problems. I did not build this motor. i only dis assembled the block to see the condition of it. Needs to be put back together. Asking $450 obo


D15B head - unknown milage. will come with the valve cover. the intake manifold has DSM 450 injectors, AEM fuel rail, and AEM FPR. complete minus distributor asking $175 obo


Halfwit's Y8 head - built head, springs, retainers, skunk 2 cams. comes with the distributor - asking $280


Alternator - $25


BOV - Greddy style - $40


Evo intercooler - $70


Turbo TD40 - $80 very little shaft play


1991 honda civic SI shell ( clean title! ) - $650obo Has ground control coilovers. There is a CF hood ( small hole on top ), bumper and the 2 other front wheels not pictured. I dont have it in my posession. VIN will be PM'd to the MOD.


I can be reached at 770-374-9449 or PM me.

Vuongy_Dong
07-17-2007, 07:35 PM
more pix

Vuongy_Dong
07-17-2007, 07:36 PM
more pixs

Vuongy_Dong
07-17-2007, 07:37 PM
more pixss

GsrCrx
07-17-2007, 09:05 PM
whats up man, my old car, lol

bernard
07-17-2007, 10:34 PM
i wanna say those are the vitara pistions. I think. But good prices man, if i had a d ill be all over it. :goodjob:

Papa_Smurf
07-17-2007, 11:19 PM
PM'd

hit me back man, i'm interested in the shell

thinkskater
07-17-2007, 11:30 PM
yea def vitari's they look oem but they pack the heat. people push 20 psi on those pistons no problems.

wish i could buy halfwits head, from what i saw when i took the head off halfwits engine it is a d16 y8 , just look at the combustion chambers on the head. closed and small homie. anyways ,

voung u straitin front ends out or is it u just install new rad supports?

Vuongy_Dong
07-17-2007, 11:37 PM
yea def vitari's they look oem but they pack the heat. people push 20 psi on those pistons no problems.

wish i could buy halfwits head, from what i saw when i took the head off halfwits engine it is a d16 y8 , just look at the combustion chambers on the head. closed and small homie. anyways ,

voung u straitin front ends out or is it u just install new rad supports?
thanks for the info on the head. i didnt pay attention on the head, as i am really busy lately. Just got to get these stuff sold! Whats wrong with your front end? if it needs to go on a frame machine, i cant do it. anything other than that, i can do it.

Papa_Smurf
07-18-2007, 12:06 AM
i call 1st dibs on the shell :ninja:

WhiteAccord
07-18-2007, 12:08 AM
When did youget this??? bump...

thinkskater
07-18-2007, 12:14 AM
thanks for the info on the head. i didnt pay attention on the head, as i am really busy lately. Just got to get these stuff sold! Whats wrong with your front end? if it needs to go on a frame machine, i cant do it. anything other than that, i can do it.


ill tak pics tomorrow dunno whats a matter with it. may only need few things

1SOL2NV
07-18-2007, 05:48 AM
would u take any trades for pistons and rods ????

Vuongy_Dong
07-18-2007, 08:38 AM
^^^ at this point no.

1SOL2NV
07-18-2007, 08:48 AM
well when the point gets here hit me up man !

AnTi-PooN
07-18-2007, 11:11 AM
any part outs on the shell lemme know

DamnDisLaOsBoY
07-18-2007, 01:10 PM
DONT SELL THE D15B HEAD... ILLL BE OVER @ 5....

Vuongy_Dong
07-18-2007, 01:12 PM
SI shell pending to ZC Hatch

DamnDisLaOsBoY
07-18-2007, 03:21 PM
the D15B head is mine! sorry guys!

Papa_Smurf
07-18-2007, 04:06 PM
SI shell pending to ZC Hatch

:D Hey, fill me in on details, miles, sunroof, paint quality, and body dammage.

I might be comming by on Saturday to take a look if all the details are good :goodjob:

GsrCrx
07-18-2007, 09:19 PM
damn man, why u selling all my stuff so cheap??? lol i might buy all my shit back and hace 2 cars now..... lol

KevinT707
07-19-2007, 01:19 AM
damn man, why u selling all my stuff so cheap??? lol i might buy all my shit back and hace 2 cars now..... lol
Ha, so you sold the EF huh? .. I remember you was telling me about the problems. I guess you've learrned your lesson from getting motors built by that "guy" now ehh? Vuong knows about his dirty work also.

GsrCrx
07-19-2007, 02:52 PM
yea i heard man, but im basically starting over now, with a stock gsr, that sucks, lol,mim going turbo again though, maybe in a couple of months......

Vuongy_Dong
07-20-2007, 08:29 AM
no one?

Crx91
07-20-2007, 09:50 AM
how much u askin for that turbo stuff in the pic pm me

Jermz478
10-17-2007, 02:43 PM
Is the shell gone pm me?

Papa_Smurf
10-17-2007, 08:21 PM
3 month old thread....


but yes, it's gone.

JDMaccord
10-17-2007, 09:20 PM
know somebody tha buy ur hatch>>>>> pm me 4 their s/n

JDMaccord
10-17-2007, 09:21 PM
n/m it gone

wannab20hatch
10-17-2007, 11:53 PM
how much for the wheels and cf hood off of the shell?

wannab20hatch
10-17-2007, 11:54 PM
n/m shouldve seen the date.

JDM onlyy
10-18-2007, 02:49 AM
Lol, so many people got owned by the date...Haha.

PiGeOn
05-16-2009, 11:49 PM
is the alternator still for grabs...what obd is it...lmk

bigdare23
05-17-2009, 12:14 AM
Look at the date before posting please!

chris89hatch
05-18-2009, 01:16 PM
need that Alternator

chris89hatch
05-18-2009, 01:17 PM
damn