Boosting a z6 to 200hp

[Mr.MuayThai]

how much will it cost me? and where can i get it?

[112480]

Simple.....Greddy kit, honda-tech.com or ebay.

[Vteckidd]

to do it right $2500-3500

[2.0civic]

buy halfwits setup

[1SOL2NV]

mmm i love boost ..

[rickylsi]

ive got a sohc zc vtec and ive got 3000 in my car for 1800 and my kit for 1200 and im probably around 170. Ill find out at ballground dyno.

[Mr.MuayThai]

thanks guys! I was thinking something like that! so would i got with a .60trim t3/t4 or one of those little t25 nut sack turbos?

[rickylsi]

depends on ur setup and what you want. i have .63 so i dont start to boost till 3800 which is good for my eveyday driver. But when it does boost its bad ass. Starts to spin about 4500 when vtec hits in first. i like that. but if you wanna boost faster go smaller.

[Codeman1407]

good luck with this one, hope you actually get it running lol.

[Mr.MuayThai]

Yeah no shit bro! That fucker in Iowa screwed me over! I will never do honda swap again! too many scammers! but im buying this d16z6 swap from this guy in powder springs so i don't have to worry! but thanks!

[Codeman1407]

shoulda checked out hmotorsonline.com... good stuff there...

wish my car was done, just ordered a tranny today... the whole thing was shot to the point of no rebuilding... shame.

[Mr.MuayThai]

Yeah i did bro, but that shit is too expensive for my blood. i met a guy that bought some motors offline and the only way they would cover his warranty would be if he replaced like 6 or 7 things on the motor. . . so im saying no to those places! i would rather buy locally. but good looking out! and good luck on the Vdub. oh and do you still want my nitrous?

[osnap]

haha good to see your intentions for the Z6 are the same as mine were when i bought it.... but i just bought a VTEC model sol, so now i have a B16 to play with. DOHC ftw. : P

[1SOL2NV]

lol .

[Mr.MuayThai]

I see! congrats on that! but when im boosted i'll race you! LOL! i think i might get cha? well until you boost . . . then im screwed!


haha good to see your intentions for the Z6 are the same as mine were when i bought it.... but i just bought a VTEC model sol, so now i have a B16 to play with. DOHC ftw. : P

[osnap]

I see! congrats on that! but when im boosted i'll race you! LOL! i think i might get cha? well until you boost . . . then im screwed!

a boosted Z6 done right will walk all over me. But yeah... as soon as I go FI, you're toast :D

[Mr.MuayThai]

I know. . .but until then. . .

[Autoworks]

We can build you a full custom kit, installed for $2900, using only the best components.

[Dirty Octopus™]

Single Cams FTW! :yay: :ninja:

:ninja:~leaves~:ninja:

[1SOL2NV]

Single Cams FTW! :yay: :ninja:

:ninja:~leaves~:ninja: hehehe ... :boobies:

[osnap]

damn all my solers are turning on me. looks like im the sole fighter in the corner for the DOHC dark side... Edlee, Kashime, and John for the SOHC light side. bring it, bitches!

...but enough thread jacking. lol

[1SOL2NV]

haha .. single cam FTW ... i cant look away from the LIGHT !!!!!! lol ... but me wants to join the dark side .. .....

[LSTurboHatch]

We can build you a full custom kit, installed for $2900, using only the best components.
listen to this guy. he does great stuff. very respectable and awesome dude too. check out d-series.org. there are alot of good deals over there, but you gotta get 65 posts to look in the FS section.

i got a turbo z6 putting down about 230 right now. i have alot of money in my setup tho, and i hope to be putting down just over 400 when the lsd goes in... :)

[Mr.MuayThai]

well shit. . . good luck with that!

[miro_gt]

a boosted Z6 done right will walk all over me. But yeah... as soon as I go FI, you're toast :D

I have a boosted z6 stock block. If you keep your block stock when you put the turbo, pm me .. I'll give you a run :D

what you'll find out is that B16 ain't so much better, lol. It all depends on the turbo setup and the tune.

[Autoworks]

listen to this guy. he does great stuff. very respectable and awesome dude too. check out d-series.org. there are alot of good deals over there, but you gotta get 65 posts to look in the FS section.

i got a turbo z6 putting down about 230 right now. i have alot of money in my setup tho, and i hope to be putting down just over 400 when the lsd goes in... :)
ah, thanks man:goodjob:

D16Z6 here, 251whp/201tq @ 10psi on our kit...they are efficient:goodjob:

[Mr.MuayThai]

ah, thanks man:goodjob:

D16Z6 here, 251whp/201tq @ 10psi on our kit...they are efficient:goodjob:


Im just looking for 200whp. How much will that cost me? i can install, you tune!

[Autoworks]

A basic kit....
Stainless Log manifold
3" stainless downpipe
Tial wastegate (7psi spring)
oil feed/return kit
charge piping kit
Intercooler
Garrett T3/T4 50 trim
Tial Blow Off valve
All couplers, T bolts, bolts, lock washers
complete bolt on
$2500

(The charge piping kits are all tigged, 2mm thick aluminum, made for each application :goodjob: )