WTB: LSVTEC parts...

[EvasiveEF9]

I'm not really in any rush to get these, but I'd like to go ahead and start piecing together some parts for my LSVTEC setup... As you'll see, I'm MOSTLY focused on the bottom end for right now. If you've got something for an Si head, or for an LSVTEC setup...go ahead and let me know.

Here's the parts I'm looking for as of right now...

Si/GSR Oil Pump - Pref new, OEM
81 or 81.5mm oil rings - New ONLY, OEM is best...
81 or 81.5mm pistons (PR3, P72, P75...I think those are the right codes...) - pref new, OEM ONLY!!!
ACL bearings - New ONLY...might take some OEM hondas
Si/GSR Water pump - Newer is better, OEM is better...
Si/GSR Timing Belt - New ONLY, OEM is better...
ARP rod bolts - pref new

Parts I'll need in the future (but may pick up sooner than planned if the deal is right)...

Si head - OBD1 pref. I might take it w/ or w/o valves, springs, cams, whatever...just depends
GE LSVTEC Gasket Set
ARP head studs - pref new
ECU

[Grimm Reeper]

I have the cams and camgears for the Si..

[xbn83]

I have some brand new USDM Type R rods. Brand new pistons standard size but have scratches on the sides, and wrist pins.

[bigdare23]

I have a homeboy that might have a head. I'll check on it for ya.

[EvasiveEF9]

I have the cams and camgears for the Si..
If I get a head without these parts, I'll be in touch.

I have some brand new USDM Type R rods. Brand new pistons standard size but have scratches on the sides, and wrist pins.
Not interested in rods, but throw up some pictures of those pistons w/ scratches...

I have a homeboy that might have a head. I'll check on it for ya.
You've got my ears.

[The Youngn]

i got a Cometic Head Gasket 81mm

[bseriesus]

i got some I.T.R L.M.A's and inner springs,lower crank brace with bolts, dowel pins,pickup tube.all O.E.M NEW never open still in bags and boxes.

[jadakid88]

check snoopy he has a shitload of ls/vtec stuff