WTB: 90-91 Integra/B16 Clutch

[cardesignz]

I need a 90-91 Integra clutch for my S1 B16 cable tranny (the 92+ clutch does not fit). I mainly just need the clutch disc since I have a fairly new pressure plate, etc. from my old YS1. Exedy stage 1 is preferred, but let me know what you have and how much you want for it. :goodjob:

[GsrME]

I have a Clutchmasters Stage 3. used with about 2000 miles on it. Holds great. $75

LMK

[Black R]

i have a stock b16a2 clutch, make me an offer and it's yours.

[GsrME]

That B16a2 clutch is for a hydro tranny and won't fit.

[cardesignz]

Black R - don't think that one will work

GsrME - where exactly are you located/where can you meet? I'm up off of exit 12 on GA400 (north Alpharetta/south Cumming area).

[GsrME]

I live in Jonesboro, south of Atlanta. I will take good pics tonight of the clutch and send them to you, just give me a e-mail address. Just so not to waist your time or mine.

[cardesignz]

My email is phatcardesignz at gmail dot com

[cardesignz]

Didn't get an email, yet. I'm still looking for one. Just to clarify it is the small spline clutch (90-91 usdm integra, 89-90 jdm integra/b16).

[KevinT707]

I need a 90-91 Integra clutch for my S1 B16 cable tranny (the 92+ clutch does not fit).
The 92-93 Integra clutches should fit also since they're Cable. 94 is when Tegs turn Hydro.

[jadakid88]

The 92-93 Integra clutches should fit also since they're Cable. 94 is when Tegs turn Hydro.no the spines in the transmission are different. i ran into the same exact problem when i pulled my ys1 and put my s1 in. if you cant find one theres a place out here in conyers called "Clutch Exchange" i got a brand new exedy stage 1 disc for like $50.

[cardesignz]

no the spines in the transmission are different. i ran into the same exact problem when i pulled my ys1 and put my s1 in. if you cant find one theres a place out here in conyers called "Clutch Exchange" i got a brand new exedy stage 1 disc for like $50.
Yep. 90-91 = small spline, 92-01 = large spline (hydro vs. cable just effects the throwout bearing).

Thanks, I'll probably be checking out the clutch exchange if I don't find one within the next day or so (I looked them up and they have 3 locations around atlanta, but most of them are still going to be a drive for me). So, if anyone has one, let me know ASAP!

[cardesignz]

I don't want to drive to conyers in the morning, but it looks like I may have to in order to change transmissions this weekend since all of the local parts stores just have $200 OEM clutch kits in stock and can't get a disc until mid next week. If anyone has a 90-91 clutch disc, give me a call.
-John
404-933-2208