PDA

View Full Version : Want to see pics of gsr throttle body and a type-r


KREEP
07-01-2007, 01:11 AM
Can someone please post pics of a gsr tb and a type-r tb???? I have a 2000 gsr and I thing someone swapped the tb out for a type r but I don't know the difference. Can someone post some pics of both?? Thanks reps will be thrown around like a mad man for months to come foor the guy who posts pics! Thanks a whole lot in advance!!!!!!!!!!!!!:goodjob:
btomic
07-01-2007, 09:27 AM
http://www.team-integra.net/images/BAEC1978-D3A7-4405-AB2D-2761DC15A96D/articles/typer/engine2.jpg
Type-R below


http://www.ff-squad.com/tech/tb/tb.nofitv.jpg

GSR below
http://www.ff-squad.com/tech/tb/tb.fitv.jpg

Hope that helps, found those on google images, not sure if its the parts your looking for tho
allmotoronly
07-01-2007, 10:01 AM
if yours looks like the second one, you need to remove the cover that is shown to the left if the little hand on the side.
KREEP
07-01-2007, 10:08 AM
Mine looks just like the top one. What does that mean? Did soemone switch out the intake manifold and throttle body for a type r setup? I am confused:???:
japan4racing
07-01-2007, 12:15 PM
if you dont have the lobster claw looking manifold on your gsr then yes its been swapped. but not for a type r mani as they will not bolt on to your head. its most likely a blox or skunk2 manifold
KREEP
07-01-2007, 12:23 PM
It looks to be factory manifold. But the throttle body and the tb gasket look identical to a type -r tb and gasket???????? Did they do soemthing different in 2000????and 2001???????:thinking:
allmotoronly
07-01-2007, 02:21 PM
It looks to be factory manifold. But the throttle body and the tb gasket look identical to a type -r tb and gasket???????? Did they do soemthing different in 2000????and 2001???????:thinking:

they didn't do anything different in 2000 and 2001. someone must have swapped the TB. There must be a leak somewhere. Either that or the IACV is stuck open. even if the guy cleaned the screen on it, it could still get stuck. it is a solenoid, and sometimes they stick. If it is stuck open, then too much air is getting in, causing it to surge.
KREEP
07-01-2007, 06:33 PM
I will replace the gasket as soon as I can get one ordered.