PDA

View Full Version : got a new dsm-needs alot of work



btomic
07-01-2007, 12:10 AM
Alright i bought a 95 tsi in the 3k at 140k miles, and man this fucker needs work...
Check it out and tell me what you think
http://i96.photobucket.com/albums/l189/BTDSM/talon1.jpg
I don't know what goes here, do YOU!?
http://i96.photobucket.com/albums/l189/BTDSM/turbo1.jpg
O2 sensors cut?..ecu throws 4 codes, 2 are 02... like my dipstick?
http://i96.photobucket.com/albums/l189/BTDSM/o2.jpg
sooo many wires unplugged...
http://i96.photobucket.com/albums/l189/BTDSM/wires.jpg

runs strong tho.

2.0civic
07-01-2007, 12:21 AM
you bought a $3k DSM shell LIRL?

Evil Goat
07-01-2007, 11:35 AM
the hose missing from the nipple goes to the nipple on the wastegate

rewire your o2, its a simple hookup, personally id replace it

as far as the plugs go i have no idea, pretty gimp picture to try to tell you where they go or what they are for

and crankwalk is a myth....fix that simple shit, get you some fuel, a 50 trim, and a nice exhaust w/ open dump and have fun scaring little kids while tq steering everywhere you go

dcshoeco
07-01-2007, 12:52 PM
Love the car an g/l on fixing it..For how much you got it for not a bad price at all..

btomic
07-01-2007, 07:48 PM
yea I actually got more in depth and shit, the unplugged shit is for like cruise control and ac and shit, i plan on buying an o2 sensor, but yea thank for telling me where that nipple goes because i just pluged it, and when my did my car idled back at 800 instead of 1200

sleepys4
07-02-2007, 07:24 PM
I have a 1g bov for sale, if you need that. Also ported 02 housing. I see that you could you both of those.

koi
07-02-2007, 09:07 PM
AWD or FWD?

cactusEG
07-02-2007, 09:22 PM
but the 2nd pic, a hose goes there from the stock BOV i for got the real name of the peace..

GSRtegŪ
07-02-2007, 09:33 PM
Looks clean and GL on finding were everything goes.

aguynamedpat
07-02-2007, 09:39 PM
but the 2nd pic, a hose goes there from the stock BOV i for got the real name of the peace..

No, the BOV line goes to the intake manifold. Does the car have a manual boost controller? Thats what the nipple is for right there...

btomic
07-02-2007, 10:00 PM
no it doesnt have a bc, I just plugged the fucker, and what i thought were symptons of crankwalk was just an air leak in my clutch where if you gently touch your clutch it will slowly suck to the floor, but if you keep your foot off of it and use it normally then no worries:D

Evil Goat
07-02-2007, 10:02 PM
but the 2nd pic, a hose goes there from the stock BOV i for got the real name of the peace..

ummm...nossir it does not

the stock bov should have a hose already hooked into a source on the intake manifold, this nipple shown feeds the internal wastegate



edit....durr repost....i started to replied then walked off, came back and hit send

btomic
07-02-2007, 10:04 PM
I dont see any open nipples on wg unless its behind/under

Evil Goat
07-02-2007, 10:05 PM
there should only be one nipple on the wastegate

Evil Goat
07-02-2007, 10:06 PM
No, the BOV line goes to the intake manifold. Does the car have a manual boost controller? Thats what the nipple is for right there...


exactly, the mbc would be inbetween the nipple on the housing and the nipple on the wastegate

btomic
07-02-2007, 10:09 PM
Any 2g dsm guys in here able to show me what there O2 sensor hook up looks like on the engine side/cuz i got a new one from autozone but i think they gave me some crazy pos lol

aguynamedpat
07-02-2007, 10:13 PM
Any 2g dsm guys in here able to show me what there O2 sensor hook up looks like on the engine side/cuz i got a new one from autozone but i think they gave me some crazy pos lol

If you get one from Auto Zone make sure its O.E. type and not universal. If its universal you have to wire it in. The sensor obviously goes in the O2 housing, but the plug itself plugs in on the left side of the engine bay under the thermostat housing.

btomic
07-02-2007, 10:15 PM
yea it deff was the OE I made sure of that, but i was searching and other people have had the same problems and recomended buying one from oxygensensors.com once i get this o2 sensor fixed and some 550 injectors ill be straight i think for tune/better timing, I guess the dude put on evo exhaust mani/turbo and didnt upgrade fuel. Engine idles inconsistently from 800-1200, other than that its pretty nice, the body is still really nice

redrumracer
07-02-2007, 10:27 PM
have you tried vfaq.com yet.

btomic
07-02-2007, 10:28 PM
yupp

Greddypacked
07-03-2007, 08:29 AM
go to www.dsmtalk.com. They know everything about the 1G-2G dsm's, and would be able to answer that in a jippy.

cactusEG
07-03-2007, 08:30 AM
www.dsm.org

Evil Goat
07-03-2007, 10:04 AM
yea it deff was the OE I made sure of that, but i was searching and other people have had the same problems and recomended buying one from oxygensensors.com once i get this o2 sensor fixed and some 550 injectors ill be straight i think for tune/better timing, I guess the dude put on evo exhaust mani/turbo and didnt upgrade fuel. Engine idles inconsistently from 800-1200, other than that its pretty nice, the body is still really nice


get me some pictures of the manifold, that looks to be a 16g/14b by the #'s on the case i can see, in which case the manifold is stock, and the stock 450's would be fine, i ran an evo3 big 16g with ported housings, full 3" exhaust w/ 3" apexi dp (w/ no cats or resonators) on the stock fuel system for the longest and never had any trouble from it

if youre going to buy some injectors you should look around for fuel kits, you can usually get a good deal on injectors, a pump, and a afc controller, but lots of fuel is useless without lots of air, do not install huge injectors on a baby sized turbo like you have now

http://www.gadsm.org <----nicest dsm guys out there, im yet to see someone flamed for asking a question, just do your research and ask questions on stuff you dont understand, dont expect people to hand you things

Z U L8R
07-03-2007, 11:27 AM
i just started on my 90 gsx ^_^

i only know like 1 other dsm guy, so pm me contact info

btomic
07-03-2007, 02:04 PM
Alright, I was told its evoIII turbo/mani, heres what else i got - greddy IC piping, Sparco IC, and MEGAN 3" turbo back

http://i96.photobucket.com/albums/l189/BTDSM/ass.jpg
http://i96.photobucket.com/albums/l189/BTDSM/greddy.jpg
http://i96.photobucket.com/albums/l189/BTDSM/mani.jpg
LOL @ my dipstick
http://i96.photobucket.com/albums/l189/BTDSM/turbo2.jpg
http://i96.photobucket.com/albums/l189/BTDSM/sparco.jpg


wow...I just hooked up a boost gauge and sad to say I ran it and it came out as 10/13/15/ even hit 17 now thats fuckin ridic, on stock fuel:cry: anyone know how to turn this shit down, I know i must be running super lean.