prelude partout

[brittoknee]

My loss is your gain... you guys know how much work, effort, and quality parts went into this car... so take the opportunity to put a piece of my frankenstein in your lude.

**Shell is sold so all bodyparts are too**

1992 H23Vtec JunLude:

Everything is OBO so throw me an offer... the worst that can happen is I say hell no and maybe laugh at you :D


This is whats left:

JUN III cams, springs, retainers, Volution Racing adjustable cam gears- $1500
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec011.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec011.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_adjcamgear-titanium.jpg (http://i18.photobucket.com/albums/b108/brittoknee/adjcamgear-titanium.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap038.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap038.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap040.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap040.jpg)

Hondata S100 w/ p28- $300 (pending)

Iceman CAI w/ filter and all connecting pieces- $100
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec014.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec014.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap026.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap026.jpg)

MSD SCI igniton w/ MSD blaster coil & MSD spark plug wires- $300
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap001.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap001.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap037.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap037.jpg)

Type S oversized pistons .25mm over- 3 were salvaged from the build w/ less than 200 miles on them- $100


As for the motor:

the h23 crank is balanced and in good shape- I'll take $200 for the crank, rods, and crank pulley
http://i18.photobucket.com/albums/b108/brittoknee/th_efc8e351.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efc8e351.jpg)


The H22 head has significant damage to intake valves and one exhaust valve seat but a highly qualified machinist said it's definitely fixable. If anyone's up for it they're welcome to it- $100

Water pump (brand freakin new)- $100

Any parts you may need from the block or head are also up for bid etc...

Manual tensioner (all parts)- $50 **pending**


VTEC Valve Cover (purple)- $50 you can paint it!
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap036.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap036.jpg)

WWRS side skirt (only one)- $50


What's gone already:


Euro R intake manifold (lightly ported)- $325 w/ custom plate for fuel rail and ALL modifications done already so all you gotta do is bolt it on and GO! ****SOLD****
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap042.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap042.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap045.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap045.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap044.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap044.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium007.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium007.jpg)

KTeller stainless 2.5 exhaust (mandrel bent) w/ KTeller 22in resonator, dual tip muffler (no cat) EXQUISITE welding job done- $400 *****SOLD*****
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap013.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap013.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap015.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap015.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap016.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap016.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap017.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap017.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap018.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap018.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap019.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap019.jpg)



DC header with custom 2.5in collector- $250 ***SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_eff471d5.jpg (http://i18.photobucket.com/albums/b108/brittoknee/eff471d5.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap025.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap025.jpg)

STR fuel rail & fuel pressure regulator- $150 **SOLD**

DSM 450cc injectors BLUETOPS- $75 **SOLD**

ported TB- $75 **SOLD**

Hondata IM gasket- $50 **SOLD**


Competition Clutch 6 puck clutch (less than 200 miles on it)- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap095.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap095.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap020.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap020.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap027.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap027.jpg)



14lb Clutchmasters lightened flywheel (also less than 200 miles on it) w/ pressure plate- $250
(I'll do clutch and flywheel for $350) **SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_efc8d981.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efc8d981.jpg)



Neuspeed front upper strut bar- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap022.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap022.jpg)

m2b4 LSD tranny- $1200 **SOLD**
(before I cleaned it and polished the front)
http://i18.photobucket.com/albums/b108/brittoknee/th_efef33e6.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efef33e6.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_efef3134.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efef3134.jpg)



DC Sports rear lower tie bar- $75 ***SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec024.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec024.jpg)



AEM Power Pully alternator pulley- $40 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium003.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium003.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium005.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium005.jpg)


MOMO Race steering wheel w/ Sparco steering wheel hub- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec007.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec007.jpg)


EL gas and water temp gauge- $25 **SOLD**

Wingswest RS front lip (needs some love)- $250 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture029.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture029.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture031.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture031.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture025.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture025.jpg)


JDM Black housing onepiece headlights (great condition)- $225 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap003.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap003.jpg)http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap005.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap005.jpg)


OEM Custom taillight (amber removed) RIGHT side only- $35 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap011.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap011.jpg)


Accord rear lip- $20 (the right side was cut a little too much by my exhaust shop... but if you want it its yours) **SOLD**


Radiator/fans- $150 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap023.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap023.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap024.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap024.jpg)


complete wiring harness (very clean)- $100 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap021.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap021.jpg)

2 Chrome audiobahn 10' sub grill covers- $30
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium009.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium009.jpg)



***The complete shell is SOLD... so all body parts are too***

This is the beginning to a long heartbreaking partout.... but it's the best of the best stuff for the 4th gen.

Ofcourse buyer pays any and all shipping...

Feel free to call me @ 678-789-9506, email me @ [email protected], or pm me here....

Thanks

[EclipseE16g]

Hey there..do you happen to have the A/C Discharge hose? It connect from the a/c compressor to the hose that goes into the cabin..I think its the LOW side a/c line.let me know if you have it.
Leon
4046448504

[brittoknee]

i do.... i took it out to put on my si (which has abs) and it was totally different. What year is your car and what model is it? the hose I have will only fit the base S model.... (non abs)

[brittoknee]

bizump

[1050w]

I am interested in the cylinder head, give me a call when you can 770-256-2902 or [email protected]

[brittoknee]

cool... i need to go pick it up from the machine shop still

[DaMaGe ZWK]

bump for my girl, even though she didnt sell me the suspension... :(

[brittoknee]

heh... SORRY but it went with the shell :)

[2.0civic]

why did you part it out?

[brittoknee]

dropped a valve head on me... cracked a piston so either I could spent another 3g on sleeving it and redoing the valves or part it... i'd rather get a bike so yah

[1050w]

cool... i need to go pick it up from the machine shop still


Just let me know when you have picked it up.

[cwood1388]

Bump to the top. you tried selling on prelude power?

[brittoknee]

you know this!

http://preludepower.com/forums/showthread.php?t=265766

[cwood1388]

cool cool. Im really surprised your still sitting on this stuff

[brittoknee]

yah well a lot went pretty quickly.. its just a few things that are still here... im in no rush :)

[dakilla4ever]

I want that Vtec head. If you still have my number call me tomorrow and I'll try to come get it this weekend.

[1050w]

cool... i need to go pick it up from the machine shop still

You have a pm!

[cwood1388]

showing love bump.

[brittoknee]

bump

[1050w]

you have pm

[brittoknee]

updated.... got rid of the euro r today

[brittoknee]

up

[cwood1388]

ttt

[brittoknee]

msd anyone?!

[dirtyaccord]

do you have the harmontic balancer

[o_bomb]

do u still have the h23 manual tension pulley kit

[brittoknee]

engine is still at the machine shop :O

i swear im going to go get it one of these days!


:)

[Goinfasterthanu]

bump for good seller....

[.93lude]

quick question, im doing a conversion on my '93, would you happen to have the pedal assembly?

[jfman]

Got a stock exhaust manifold and downpipe?

[brittoknee]

the shell is gone... all i have now are whats listed in original post and engine parts...

:) someone buy my JUN cams! or my MSD

[brittoknee]

bump... got the engine back today so if youre interested in the h22 head, h23 block, balanced crankshaft, or anything else lemme know!

[H22A4SH]

So I guess you can't really just get the crank and rods like you have posted, It is more like 400 for a whole messed up than 200 for the crank and rods right?

[dakilla4ever]

I can give you 100 for the crank. Pm me if you'll take it.

[brittoknee]

I'm wanting to get rid of the block as a whole first.... its perfect for a sleeving project!

I might end up breaking it down and parting it later... but I just don't have time to do it right now and would rather the whole thing be gone

[dakilla4ever]

It's an H23 block right? What damage was done to it? How much are you asking? Is the balanced crank and rods already in there? Does it come with pistons? shoot me a pm later. I get that alot faster.

[brittoknee]

sent

[jfman]

what color is the parts lude?

[PawnShopCEO]

I'd love to bid on the jun3 cams but I've seen them go for about half of what you are asking

[brittoknee]

I'd love to bid on the jun3 cams but I've seen them go for about half of what you are asking


funny... cuz they're already gone :P

[brittoknee]

only stuff left are the engine parts... and the msd....

i dont get on here much at all anymore so email me at [email protected]