Powder Coating Equipment

[kerndog8]

About a year ago I bought what I needed to start doing powder from the house. It was fun while it lasted I just don't have the room or time for it anymore. The oven has only been used about 10 times since new (bought from HHGregg). Without building any kind of extender it will do up to a 17" rim with no problems.

I have 15 colors that if need be I can list out. I have a full assortment of plugs and caps to cover anything that needs to be. 4 rolls of high temp tape. Chemical's to clean with, the spray gun, the whole nine yards. If you are looking at this to do a lot of coating you might want to invest in a sand blaster. I used my buddy's whenever I got nasty parts that the cleaner wouldn't take care of. I also used a grinder a good bit instead of the blaster.

I have separate tanks for each color (and extras). I set it up that way so that I did not have to dump, clean, and dry one every time i wanted to use a color. This is by far the best way to do it, keeps everything nice and organized.

The only thing that is NEEDED to get you going is an air compressor.

I am selling everything posted for $450 (the oven alone was over $300) I am located in Canton for those wanting to come take a look or pick it up. I can possibly deliver this if need be.

The colors - a few are stacked in the second row and cant really see them

http://i6.photobucket.com/albums/y238/redefinedWRX/Random%20Things/Powder/IMG_1940.jpg

A shot of the tape, chemicals, and 2 boxes full of caps and plugs

http://i6.photobucket.com/albums/y238/redefinedWRX/Random%20Things/Powder/IMG_1948.jpg

Oven - a little dusty

http://i6.photobucket.com/albums/y238/redefinedWRX/Random%20Things/Powder/IMG_1941.jpg

The Gun

http://i6.photobucket.com/albums/y238/redefinedWRX/Random%20Things/Powder/IMG_1943.jpg

And here is a shot of a valve cover

http://i6.photobucket.com/albums/y238/redefinedWRX/Random%20Things/47b6cf24b3127cce985486338a410000001.jpg

http://i6.photobucket.com/albums/y238/redefinedWRX/Random%20Things/47b6cf24b3127cce9854863c0b7e0000001.jpg

[livelifeenvy]

hey wassup before you sell you think you might wanna do one last powder coat?

[greasemunkey]

damn! nice valve cover. CB7 FTW

[livelifeenvy]

Pm me a reponse

[greasemunkey]

i got a spare red vc that was powder coated red but when i pressure washed it it alot chipped off...40$ if you can make one the same as the pic above except no cb7 tuner...not really a fan of that site

[kerndog8]

i got a spare red vc that was powder coated red but when i pressure washed it it alot chipped off...40$ if you can make one the same as the pic above except no cb7 tuner...not really a fan of that site

Thanks but no thanks. That cost more then double what your offering.




Bump

[JDM onlyy]

i would buy this if I wasn't on probation

[kerndog8]

i would buy this if I wasn't on probation

Maybe this is a stupid question but what does probation have to do with you buying this?




And to whoever buys it if they dont know how to coat things I'll walk them through the process. It's fairly simple.

[JDM onlyy]

Maybe this is a stupid question but what does probation have to do with you buying this?




And to whoever buys it if they dont know how to coat things I'll walk them through the process. It's fairly simple.

i know i just answered you on aim bout this but this if for other people who are wondering why i cant buy this because im on probation...probation eats my money worse than crackheads on crack. :(

[kerndog8]

i know i just answered you on aim bout this but this if for other people who are wondering why i cant buy this because im on probation...probation eats my money worse than crackheads on crack. :(

so become a crackhead...no wait cant do that either cuz your on probation

[JDM onlyy]

so become a crackhead...no wait cant do that either cuz your on probation

never again... :no: lol hahahaha but anyways. i was wondering, would you let go of the powercoating stuff without the oven? like the gun and some of the powders and tape and caps. how much you would you let it go for?

[kerndog8]

never again... :no: lol hahahaha but anyways. i was wondering, would you let go of the powercoating stuff without the oven? like the gun and some of the powders and tape and caps. how much you would you let it go for?

If I sold it separately I would sell it in 2 parts. 1 part would be the over the other EVERYTHING else. To hard to split up some of the powders, caps etc.

Just so you know you cant do this in an over where your going to be cooking food to LOL...you might die!

[canadianrcis]

thats a nice valve cover (cb7's ftw)

[kerndog8]

Thanks...


bump

[GSRteg®]

GL on the sale. :yes:

[JDM onlyy]

If I sold it separately I would sell it in 2 parts. 1 part would be the over the other EVERYTHING else. To hard to split up some of the powders, caps etc.

Just so you know you cant do this in an over where your going to be cooking food to LOL...you might die!

Lol, I wasn't planning to, but I know one of my friends has an oven they don't use anymore sitting around. My ex-gf has one too I think. She just changed hers..Lol.

[kerndog8]

Lol, I wasn't planning to, but I know one of my friends has an oven they don't use anymore sitting around. My ex-gf has one too I think. She just changed hers..Lol.

PM Sent, right now I have 2 guys that are interested in everything, I would rather sell everything together so if that doesn't work I'll consider doing it separate.

[Scrilla]

PM me price on everything BUT I don't need the oven... LMK!

[kerndog8]

pm sent

[kerndog8]

Bump

Have not heard back from the guy wanting it all so as of now I'll do the powder goodies and the oven separate.

[therzdae]

have you got my pm man? ive been waiting last night and today for a response...

[kerndog8]

***SOLD***