PDA

View Full Version : Taillight help...please


1996ECLIPSE
06-23-2007, 12:44 PM
I need help with my tail-lights...I need to take them out and clean them, but I dont know how to do it?? and I would have to reseal them, that is the problem, what could I use and do to get them back together after I clena them??

P.S: Here is a picture of my taillights........
koukis14
06-23-2007, 03:47 PM
I need help with my tail-lights...I need to take them out and clean them, but I dont know how to do it?? and I would have to reseal them, that is the problem, what could I use and do to get them back together after I clena them??

P.S: Here is a picture of my taillights........

Ok first off, WHAT? and second how doe the Vice President of the best car club in GA not know hot to do this???
Nitro
06-23-2007, 03:55 PM
^^^^ :lmfao:
btomic
06-23-2007, 08:26 PM
just buy new ones, Mr. President
thepolecat
06-23-2007, 08:29 PM
Nu Glass works miracles. as for getting it off- come on- look that one up online Mr. VP
cactusEG
06-24-2007, 01:37 PM
what kinda car
btomic
06-24-2007, 01:56 PM
post a picture because usually when head/tail lights are dirty its usually the outside and you can't even tell, especially if they arent stock and are clear plastic, the rays from the sun will discolor them or atleast that was some of my experiences in the past, and i just used wet sand paper and then buffed it out when finished
Evil Goat
06-24-2007, 06:28 PM
Vice President of the best CUSTOM CAR CLUB in Central, GA...FOX CITY CUSTOMS



#1 car clubs suck
#2 never heard of the car club, and im born and raised in central ga, therefore theres no way it could be the best


#3 pull the fuckers off, bake em to loosen up the glue, pry them apart, then use clear caulk to reseal
#4 if they are anything other than stockers, shoot yourself in the face, now
Kamikaze
06-24-2007, 06:50 PM
A lot of tails are sealed and can only be opened with a Dremel tool. Have fun with that.
Evil Goat
06-24-2007, 06:55 PM
A lot of tails are sealed and can only be opened with a Dremel tool. Have fun with that.


shhhhhh....



stick to baking them 450 degress for about 90mins should free em up :lmfao:
QX56tech
06-24-2007, 08:01 PM
just replace
GSRtegŪ
06-25-2007, 10:49 AM
Just replace them bro it be alot faster and less head ache.
1996ECLIPSE
06-26-2007, 08:36 PM
ok..well...I know its not on the outside, its from where water has leaked inside over the years, and dried up, and I want to get it clean...but ok
koukis14
06-26-2007, 09:50 PM
I am guessing they are autozone clear tail lights??
1996ECLIPSE
06-27-2007, 12:14 PM
not that I know of...When I got the car from my brother they were on there...and he only went to the BEST places to get things for the car..Everything that was done on the car was in North Atlanta
btomic
06-29-2007, 01:27 PM
ebay...im sure you can find the same taillights that you prolly have for 20 bucks