PDA

View Full Version : FS: DPR Stage 5 Head



BABY J
06-21-2007, 11:10 AM
Ok - here we go.

* the head is off of a 2000Si (b16a2) that had about 40k before being pulled.
* DPR Stage 5 port job
* full race valve job
* DPR + .5mm bigger intake/exhaust valves
* Calico coated intake/exhaust ports, as well as coated valves.
* DPR racing valve springs and retainers

1600 SHIPPED!!

http://www.dprracing.com/ (http://www.dprracing.com/)

This is not your grandmas head - serious inquiries only please. Never ran, hot-tanked and professionally prepped b4 the build and ready to go. Pics for serious inquiries - otherwise you won't know what you're looking at anyway (no offense).

Thanx for playing.

B18CDELSLO
06-21-2007, 12:35 PM
BALLIN!!! all motor power aint cheap, but thats a good deal on the head, bump 4 you

BABY J
06-21-2007, 12:42 PM
Thanx - I am literally throwing away $1k on a brand new piece. Pics will be up tonight. The head is where most people skimp out - which is funny b/c you will find the most power there. At any rate - this is the last head you will need to buy and will hold its value if you ever need to move it in the future. Thanx man. TTT

SLow_POke
06-21-2007, 03:24 PM
BUMPAGEEE for a

HIGH QUALITY Cylinder head

BABY J
06-21-2007, 06:58 PM
ttt for pics - plus these:

Black R
06-22-2007, 03:59 AM
can you please post the flow numbers int and exh?

i'm assuming this head was build for na?

and what bore is opened up for (or not)?

BABY J
06-22-2007, 10:29 AM
This head was built for turbo, not N/A. Less than a 2.0L (unless it's FI/NOS) will not be able to make maximum use of this head. Sure - it will make more power than anything you could put on the block - lol... but the head would just be cruising and not used to it's full potential. Very rarely would you need oversized valves for a n/a STREET car app. I sent a message to DPR for the charts. You DO know that the numbers will vary bench to bench though.

PS: This head was actually built for Joe Demaree (NHRA Hot Rod Class) pro driver (who won in St. Louis on 9 June - congrats Joe!!! LOL)

http://www.nhrasportcompact.com/2003/drivers/J_Demaree.html Feel free to call Joe at 317-733-8442 and he will vouch for this head.

blown_ss
06-22-2007, 01:00 PM
damn. wish i had the money. gl with the sale.

BABY J
06-22-2007, 01:03 PM
Right on - save your nickels - this is a steal any way you slice it. Trust me. You do not get this kinda quality at this price everyday. Thanx for the bump.

Black R
06-22-2007, 02:10 PM
Very rarely would you need oversized valves for a n/a STREET car app.

That's why I was kinda scratching my head. But since they're only .5mm bigger, I suppose I could see that for a big bore motor built to turn high rpm's.

Good luck with the sale. It almost looks like the inner surfaces of the head are coated with a heat/ friction coating - or is that just the pics?

BABY J
06-22-2007, 02:23 PM
+.5 won't hurt your power, even for a stock bore block. It's impossible to put this head on a stock block and lose power (ultimately). The key would be the cam profiles to really use the head fully. Calico went through the head and valves totally. My guess is that if you are running race gas or alcohol and aren't getting full burn, you'd burn through the coating on the valves. It's hard to hurt the coatings w/ just pump gas though. When my Inline Pro block came apart to freshen the rings I still had plenty of coating and it was a big shot nitrous block. But more important than the bore, your CRs and revs are gonna be more of a factor for the oversized valves. Even a stock b16 revs enough to get gains from such a small overbore. Small enough where you can run a stock bore, but enough to see the difference on a dyno and the street - can't lose. Especially if you kill a bottom end, you aren't forced to wait on a sleeved/overbore block to get up and running again. Thanx for the bump homey.

BABY J
06-25-2007, 12:33 PM
Up with hope... down w/ dope.

BABY J
06-26-2007, 10:07 AM
Fuck it - up with dope.

B18CDELSLO
06-26-2007, 10:47 PM
for any1 doubting its worth this price a BARE DART head is 3k

BABY J
06-27-2007, 08:32 AM
^^ Speaks da troof. Amen reverand.

caseyT
06-27-2007, 04:43 PM
I have to admit thats some good head right there.:boobies:

Halfwit
06-27-2007, 07:28 PM
yeah, ill vouch, baby j gives good head.

BABY J
06-28-2007, 09:26 AM
LOL - @$$

BABY J
07-01-2007, 01:23 PM
ttt

Sneezin
07-01-2007, 01:41 PM
nice head man free bump

BABY J
07-02-2007, 09:35 PM
right on bro. :)

BABY J
07-06-2007, 12:00 PM
UP

SRCRX
07-06-2007, 11:48 PM
Fuck it - up with dope.


LoL

WoW that's some nice work :goodjob:

azianhustla
07-07-2007, 02:30 AM
Bump for a Nice Head man... I wish I had the Money to Put into a HEad like that!!! Bump, Someone buy this head!

BABY J
07-07-2007, 08:34 PM
^^ That's right! I agree w/ him. Some1 pick it up. LOL.

BABY J
07-13-2007, 07:35 PM
ttt

SRCRX
07-15-2007, 06:29 AM
Damm, I thought this would be gone!!

BABY J
07-15-2007, 07:17 PM
ttt

BABY J
07-16-2007, 09:56 AM
NEW PRICE - 1800 SHIPPED.


It won't get any better... I will use it as a coffee table before I let it got for less. LOL.

Vteckidd
07-16-2007, 10:55 AM
good deal

Altima_404
07-16-2007, 12:02 PM
that is some good head there buddy...g/l with it

BABY J
07-16-2007, 01:08 PM
thizzanx

BABY J
07-17-2007, 07:51 AM
daily bump

BABY J
07-17-2007, 07:30 PM
up

BABY J
07-19-2007, 02:59 PM
up

BABY J
07-20-2007, 07:44 AM
if I was you, I'd get this shit. lol

BABY J
07-22-2007, 10:53 AM
you want it - stop playing around and get some serious parts.

BABY J
07-23-2007, 10:31 AM
gitchoosummadat

BABY J
07-27-2007, 11:10 AM
final bump b4 i stick it in storage. ;)

BABY J
08-01-2007, 08:04 AM
To answer the PMs - yes I still have it, and it is ready to ship. And no it does not come w/ a manifold... I can toss in a VTEC controller though.

B18CDELSLO
08-04-2007, 01:20 AM
betta head then suppahead could give!!! bump it up

fucksohc
08-04-2007, 01:27 AM
damn! thats nice!!! lol to bad i dont have 2100 layin around... lol

B18CDELSLO
08-04-2007, 02:07 AM
its 1800

BABY J
08-04-2007, 07:56 AM
I could possibly do 1700 for an ATL buyer since my brother will be driving to see me here and he could bring it back (no shipping).

B18CDELSLO
08-06-2007, 10:56 PM
bumppp

BABY J
08-11-2007, 06:39 PM
thanx for the bizzump

BABY J
08-22-2007, 09:48 AM
up

BABY J
09-02-2007, 08:41 AM
i like magic

BABY J
09-07-2007, 04:13 PM
Me too

BABY J
09-15-2007, 06:13 PM
Doesn't get any better than this turds - buy my shiznit - ;)

vtecgsrguy
09-15-2007, 06:18 PM
DAMN THAT WOULD LOOK AND RUN SOOOOOOO GOOD ON MY LS PROJECT.....?????? DAMN THE LACK OF FUNDS!!!!...LOL...LOL..

BABY J
09-19-2007, 03:19 PM
4 you I will do payments... and for your sister. LOL

BABY J
09-28-2007, 09:19 AM
up1600 SHIPPED!!

BABY J
11-10-2007, 10:08 PM
ttt