Log in

View Full Version : IS300 rims FS or FT



mikesEK
06-05-2007, 11:57 AM
oem IS300 rims ,look at the pics!!!!!!!!!!!!
I call these a 6 1/2 because someone (i beleive) left a mark that
go around the lip of the wheel done when dismounting the tires
ohh yeah one of the Lexus "L's" is missing

specs
5x114.3 of course

hub bore 60.1mm ...if you need to know your bore call me I have a fitment book that has damn near every car listed ,,,keep in mind boys and girl just cause your car is 5x114.3 dosnt mean that these will fit your hub need to be 60.1mm or bigger unless your willing to use spacer or modify the wheels/rotors/hubs to make em fit

weighs 22.6lbs according to my postal scale

not stamed in the rim but my book says 35-42mm offset

17x7

I'd like 300 but open to offers and trades
Mike 770-309-3487

mikesEK
06-05-2007, 11:58 AM
lip pic

mikesEK
06-05-2007, 11:59 AM
dont think i mentioned it above but....the line on the lip of rims is only on 2 of them

mikesEK
06-06-2007, 12:33 PM
no......nobody??????????

mikesEK
06-15-2007, 12:21 AM
c'mon somebody!!!!!!!!!!!!!!!!!

OaTmeaL
06-16-2007, 08:04 PM
BUMP for some sweet wheels... These are one of the reasons why I want a IS300! I do know that those will fit the 98-99 Accord for the V6 but not sure on the 4cyl.

Bump for wheels I wish I had!

takume
06-16-2007, 09:44 PM
These are one of the best stock rims ever.
Wish my miata is 5 lugs!!

puregroove
06-16-2007, 10:48 PM
omg...we need these for the IS...

sogood
06-17-2007, 12:24 AM
If you still have them in a few weeks, when I get paid, I'll def get them.

Bump for a nice set of wheels for cheapp.

mikesEK
06-19-2007, 02:35 AM
I'm waitin on you!!
If you still have them in a few weeks, when I get paid, I'll def get them.

Bump for a nice set of wheels for cheapp.

mikesEK
08-29-2007, 10:57 AM
i still got these ....somebody pick em up $250 bux

kkiepvvessau
09-01-2007, 12:59 AM
mike your book is wrong is 50 mm offset . will fit most car with small brake caliper ..
i used 14mm spacer to clear the 4 piston caliper on my IS ...

good luck

mikesEK
09-02-2007, 11:15 AM
I'll have to take yer word for it ....my book has been wrong before ,,but I mainly use it to determin bolt patterns!!!
mike your book is wrong is 50 mm offset . will fit most car with small brake caliper ..
i used 14mm spacer to clear the 4 piston caliper on my IS ...

good luck