im all motor running 13.8 in the 1/4

[jdmcrxfreek]

got a crx with a b16 running 13.8s in the 1/4 i guess this is pretty good

[-S Double C-]

thats a good time for a b16...whats mods?

[turb0teg]

mmm, any pics?

[hondachick22]

maybe true ,but i would have to see it . i have a eg wieghing 2,250 with me in it , with a b20 all motor ,h,i,e and ls tranny doing 14.2 in the 1/4

[2.0civic]

maybe true ,but i would have to see it . i have a eg wieghing 2,250 with me in it , with a b20 all motor ,h,i,e and ls tranny doing 14.2 in the 1/4

me too depending on mods though...

i think you would be in 13's with a better tranny..:goodjob:

[silversol]

maybe true ,but i would have to see it . i have a eg wieghing 2,250 with me in it , with a b20 all motor ,h,i,e and ls tranny doing 14.2 in the 1/4

what track is this at???

[-S Double C-]

(snatch) on here ran 14.2 in a nearly stock b16 eg hatch on drag radials so i guess it could be possible...or either he's bluffing. Was this run on street tires? Since your in rome im guessing you ran at Steele?

[BABY J]

interesting

[hondachick22]

mine is a vx ,gutted hatch h,i,e and was on bfgs and i wasent abale to launch above 2,500 rpms due to ecu problems and it was at silver dollar .

[KevinT707]

Hmm, interesting. Explain.

[jdmcrxfreek]

it is a b16a sir2 running a prototype ecu dc sport header injen intake<- got it free in a trade) j1 lsd tranny port and polish stage 2 cams thats it IT WAS AT STEELE AL on street tires 14s i have a drag slip but no camera if you dont think i didnt sorry i cant show you im poor and dont have enought money to get a cam

[BABY J]

Prototype ECU - do tell. ** scratches chin **

[KevinT707]

IT WAS AT STEELE AL on street tires 14s
Its hard to believe 13.8 on normal street radial tires.

Drag Radials?
How much does your CRX weigh?
WHP?
What are your trap speeds, 60', 1/8?

[Halfwit]

get em kevin.

[hondachick22]

dang , he might beable to take kevin.

[boosted_nonv]

it is possible

[KevinT707]

dang , he might beable to take kevin.
Haha.. yea you're right though 13.8 def beats my 14.5 :yes:

[-S Double C-]

:thinking: i think it's that prototype ecu doing it for him :cool:

[BABY J]

My thoughts exactly. I think it tunes the nos timer and lengthens the injector pulse another millisecond.:rolleyes:

[F1ian(si)]

ive seen a video of a eg completely gutted on slicks and skinnies on the rear do that time but its hard to believe on street tires

[jdmcrxfreek]

Ok no i dont have nos my rec. time is .658 60' 2.142 330'6.107 1/8 9.127 81mph
1/4 13.8 101mph that is exactly what the slip in front of me says
It is the ecu never seen anything like it it is a pm6 but i dont know what is up with it it has vtec rev limiter 8200rpm no knock vtec at 5500rpm but it is crazy i will be at steele next friday running my crx show up if you dont believe me show up if you can put you money where your mouth is and run me if you think you can take me

[2.0civic]

I still call BS...Slow 60', 5500 RPM VTEC with bolt ons....

How gutted is your car?? what trim is it also (dx, hf, si)?

[jdmcrxfreek]

OK look i tired of you putting me down if you dont fuckin think i dont then show up or shut the fuck up sorry things dont look real to you so fuck off k it is completly gutted si carbon fiber sunroof plug carbon fiber hatch with a lexan window

[2.0civic]

pics?

[TheChosenOne]

OK look i tired of you putting me down if you dont fuckin think i dont then show up or shut the fuck up sorry things dont look real to you so fuck off k it is completly gutted si carbon fiber sunroof plug carbon fiber hatch with a lexan windowThere, there.

Will you calm down if I tell you, I believe you! :gay:

[KevinT707]

You must hook right off the line then cause for a 101 trap a 13.8 is good. What WHP, cause damn 101 is high for a B16 with bolt-ons (160 WHP MAX) Maybe I need to start going to Steele.

The track prepped this well or your on some sticky BFG DRs ?

[jdmcrxfreek]

it is prepped real good some times but some times it sucks

[jdmcrxfreek]

I DONT HAVE A CAM SORRY

[KevinT707]

I DONT HAVE A CAM SORRY
You have Dual Cams (DOHC) what are you talking about ;)

So what I'm getting from this is you running a stock B16 with I/H/E, P&P head, LSD, on STREET tires and stock cams .. so I'm thinking no more than 170 WHP. 13.8 just doesn't add up buddy..

[seriousb13]

a b16 trapping at 101mph?? You must be close to 200 WHP?

[jdmcrxfreek]

You have Dual Cams (DOHC) what are you talking about ;)

So what I'm getting from this is you running a stock B16 with I/H/E, P&P head, LSD, on STREET tires and stock cams .. so I'm thinking no more than 170 WHP. 13.8 just doesn't add up buddy.. OK im not your buddy it isnt a stock b16 it does have cams skunk 2 stage2 dc-header 4-1 p&p head lsd port matched intake ECU it is sleeved and bored but i tired of explianing things to you I dont have to so fuck ya and see ya:goodjob:

[81911SC]

Pussy^

[BABY J]

what the hell is goin on here?

[jdmcrxfreek]

people get pissed cause other people run faster times with less mods then people with serious mods and dont want to believe it

[jdmcrxfreek]

oh yeah it dont matter any more cause i drop a valve last night the car is shit now so laugh it up ha ha ha it is funny thought anybody need any parts

[uproot]

yeah and people get all jumpy and defensive on the internet. :rolleyes:

[BABY J]

LOL - dropped a valve huh. 1st u don't have cams - then 1 post later you do. Magic.

[jdmcrxfreek]

no little sis did i dont

[jdmcrxfreek]

sorry yall hate me

[2.0civic]

we hate you because youre full of shit...or come off as it

you have a undisclosed setup running insane NA power to not be fully built with some mild work yet youre gaining almost 100% HP...

BTW, your profile says 215 HP...Do you have a dyno?? Vteckidd on here had the highest NA b series in the state and it was only 237 hp.....so in short, im still calling BS on the time AND the numbers...

[BABY J]

lol. pwnt.

[2.0civic]

OK im not your buddy it isnt a stock b16 it does have cams skunk 2 stage2 dc-header 4-1 p&p head lsd port matched intake ECU it is sleeved and bored but i tired of explianing things to you I dont have to so fuck ya and see ya:goodjob:

what cams do you have? must be beastly...your header adds like 3 hp lol...what did you have done to the head too

people get pissed cause other people run faster times with less mods then people with serious mods and dont want to believe it

most people on here dont have sleeved blocks:rolleyes:

oh yeah it dont matter any more cause i drop a valve last night the car is shit now so laugh it up ha ha ha it is funny thought anybody need any parts

you should sell that "built" motor you have...

lol. pwnt.

not really i just think if he had a over 200 whp NA B series, someone else on here could back him up

[BABY J]

Hey jdm - where are you shifting at??

[boostedb16]

hey he lives his life 13 seconds at a time.

[gijoe0720]

I call bs cause Steele does not prep there track that good. As someone said ealier snatch ran a 14.2 on drag slicks there and I ran a 15.8 on street tires spinning all the way through third gear. Me and Matt(snatch) ran on the street and I would get him.

[AnthonyF]

holy shit. nice numbers man! damn u light cars!!


do you know what u weighed?? i'm 3600lbs. yea-uh! :)

[KevinT707]

holy shit. nice numbers man! damn u light cars!!


do you know what u weighed?? i'm 3600lbs. yea-uh! :)
Heavy Chevy foO!

[boosted_nonv]

Heavy Chevy foO!

I swear he has a mustang in his sig:thinking:

[boosted_nonv]

And i never understand why everyone on IA thinks that if ya car is fast we would all know on here, that shit is funny, alot of people think its too much petty drama on here, if the guy runs 13.8 just call in out and run him on the street or something before calling it BS, so if it is actually slow or fast we all could see the results, Triniboy out

[xext12mvx]

BULLSHIT 13.8 ON STREET TIRES ON CRX U MIGHT RAN 14.5

[Vteckidd]

its possible, johnzm ran 13.2s with 165whp an slicks in a 1800lb chassis.

on street tires i find it hard to beleive a b16 could go that fast. i just dont think a FWD car will get anywhere near the 60ft required to run that fast with a 150-160whp car.

[Vteckidd]

i really dont see how a 2.1 60ft will run that fast.

my GSR CRX ran 13.8 with 190whp on kuhmp HP4 passenger tires with a 2.0-2.1 60ft

i had 190whp and a 13x TQ and i was revving to 9900 with LSD. i would finish the 1/4 in 3rd gear.

I just dont see a b16 being able to do it. an if you have a 200-215whp b16, then i would know who you are, because you just set records

[AnthonyF]

I swear he has a mustang in his sig:thinking:


his vizion blurrry. all he saw was red flash. lol. j/p :)

[KevinT707]

I'm calling this guy out to a 60-120 pull. Accept or not?

[2.0civic]

i really dont see how a 2.1 60ft will run that fast.

my GSR CRX ran 13.8 with 190whp on kuhmp HP4 passenger tires with a 2.0-2.1 60ft

i had 190whp and a 13x TQ and i was revving to 9900 with LSD. i would finish the 1/4 in 3rd gear.

I just dont see a b16 being able to do it. an if you have a 200-215whp b16, then i would know who you are, because you just set records
i knew you would pop up in here eventually:D

[2.0civic]

holy shit. nice numbers man! damn u light cars!!


do you know what u weighed?? i'm 3600lbs. yea-uh! :)

how did you gain almost 300 pounds over stock:thinking:

a fully loaded GT is 3,450......

[gijoe0720]

how did you gain almost 300 pounds over stock:thinking:

a fully loaded GT is 3,450......


How did you pass math?

3,600-3,450=150. That isn't that close to 300

[2.0civic]

How did you pass math?

3,600-3,450=150. That isn't that close to 300before you try to call me out on math, notice i said "fully loaded GT" (thats a v8 with leather blah blah blah)

The v6 (AS trymy4.0s car is) weighs in a Tad under 3300 pounds....


Thanks though:goodjob:

[sleepys4]

How fast was vteckidd 237 whp car in quarter?

[2.0civic]

lol slow....too much wheelspin..

j/k

[jdmcrxfreek]

I'm calling this guy out to a 60-120 pull. Accept or not? I GUESS YOU CANT READ SO GO BACK A COUPLE OF PAGES WHEN YOU WERE BITCHING BEFORE LIKE THE LITTLE GIRL YOU ARE....AND SEE WHERE I DROPPED A VALVE...SO SHUT UP =]

[Black R]

OK im not your buddy it isnt a stock b16 it does have cams skunk 2 stage2 dc-header 4-1 p&p head lsd port matched intake ECU it is sleeved and bored but i tired of explianing things to you I dont have to so fuck ya and see ya:goodjob:


This explains it all right here.

It's not even a b16 except for the stamp on the block, and with headwork I'd expect him to be pushing 200whp with a built bottom end.

[2.0civic]

This explains it all right here.

It's not even a b16 except for the stamp on the block, and with headwork I'd expect him to be pushing 200whp with a built bottom end.

Im still calling BS lol

[BABY J]

I still wanna know about this magic carpet prototype ECU.

[WhiteAccord]

I GUESS YOU CANT READ SO GO BACK A COUPLE OF PAGES WHEN YOU WERE BITCHING BEFORE LIKE THE LITTLE GIRL YOU ARE....AND SEE WHERE I DROPPED A VALVE...SO SHUT UP =]

Why dont you just run kevin and get it over with caus obviously you have no proof(vid) of the run, you have time slips but those can be made up... if you have that 13 sec potential, then you should have the balls to run a 14 sec car... Then basically if you dont run... YOUR ONE LYING SACK OF SHIT...:bannana:

[Benefit]

he dropped a valve , his car isnt running anymore...i believe him though

[Nissangeek]

I bet he remembered not to granny shift, and to double clutch like you're supposed too, and thats how he was able to do it. Either that or it was the direct port NOS with a fogger kit. lol.

[Mr2raceworks]

LS VTEC will get your better numbers

[lsxtreme]

OK im not your buddy it isnt a stock b16 it does have cams skunk 2 stage2 dc-header 4-1 p&p head lsd port matched intake ECU it is sleeved and bored but i tired of explianing things to you I dont have to so fuck ya and see ya:goodjob:


hmm now everything sounds nice and all.. but running 13.8s is believable.. just like my buddys civic sedan.. and kevin and vouch..... :goodjob:

bored out, sleeved.. why?? i understand the bore .. but why the sleeves.. your N/A right or are you sleeved for further plans down the road..? but watever it is.. just scan that timeslip.. and ................ u know the rest..

[Black R]

sleeved you can go 87mm max, so that's probably why..... "it's just a b16" ;)

[Tech5]

humm

[Tech5]

tell us the specs of your cam?? like duration lift etc, ? like to know? thanks Asshole

[Tech5]

Also why get mad when we call you out on your word that this car runs 13.8 an NO proof sounds like you trying to get big headed on here an to make someone to be like aww man that is a bad ass ride ,that shit is fast as hell, but knowing yourself its still is a Piece of shit Sohc Tbi

[allmotoronly]

yea talk is useless without proof. and obviously if you spent all that money sleeving the block and on prototype ECU's and whatthefuckever else, then you would have had some decent valve springs and retainers and hopefully would not "drop a valve". I have ran the hell out of my cars, over revved a few times, and never "dropped a valve". I bent a valve once when I was trying to show off and did a 4th to 3rd at 120. The engine pulled about 12k rpm, and the valve bent, not "dropped" but bent.

[Mr_S13®]

Nice driving :thumbsup

[chsdog55]

Im not saying it isnt possible because i witnessed a hatch at Steele this weekend turn 13.9 but he had a b18 bored and was pushing somewhere around 220whp. His is on street tires and spinning through 1st off the rev limit so with slicks i could see 13.7 or maybe 13.6