Ultimate 4g Prelude Partout...

[brittoknee]

My friends... the time has come. I just can't seem to overcome the bad luck. I had a valve drop on me and cause some pretty large setbacks. SO after some extensive number crunching and soul searching my choices are to sleeve it and start over or part it..... :(

My loss is your gain... you guys know how much work, effort, and quality parts went into this car... so take the opportunity to put a piece of my frankenstein in your lude.

My close friends already know this news... but if its a shock to you I'm sorry. Please keep the comments that will make me feel guilty to a minimum :(

THe upside is that I'll be on 2 wheels VERY SOON muahahaa:bigok:


1992 H23Vtec JunLude:

Everything is OBO so throw me an offer... the worst that can happen is I say hell no and maybe laugh at you :D

m2b4 LSD tranny- $1200 **SOLD**
(before I cleaned it and polished the front)
http://i18.photobucket.com/albums/b108/brittoknee/th_efef33e6.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efef33e6.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_efef3134.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efef3134.jpg)

Type S oversized pistons .25mm over- 3 were salvaged from the build w/ less than 200 miles on them- $100

DC header with custom 2.5in collector- $250 (has dual bungs for wideband and o2) **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_eff471d5.jpg (http://i18.photobucket.com/albums/b108/brittoknee/eff471d5.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap025.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap025.jpg)


Euro R intake manifold (lightly ported)- $325 w/ custom plate for fuel rail and ALL modifications done already so all you gotta do is bolt it on and GO! ***SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap042.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap042.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap045.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap045.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap044.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap044.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium007.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium007.jpg)


STR fuel rail & fuel pressure regulator- $150 **SOLD**

DSM 450cc injectors BLUETOPS- $75 **SOLD**

ported TB- $75 **SOLD**

Hondata IM gasket- $50 **SOLD**

JUN III cams, springs, retainers, Volution Racing adjustable cam gears- $1500
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec011.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec011.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_adjcamgear-titanium.jpg (http://i18.photobucket.com/albums/b108/brittoknee/adjcamgear-titanium.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap038.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap038.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap040.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap040.jpg)



Hondata S100 w/ p28- $300 (pending)

Iceman CAI w/ filter and all connecting pieces- $100
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec014.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec014.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap026.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap026.jpg)



KTeller stainless 2.5 exhaust (mandrel bent) w/ KTeller 22in resonator, duel tip muffler (no cat) EXQUISITE welding job done- $400 You have to see this exhaust... it's the sexiest thing on the car! also less than 200 miles on it. ****SOLD****
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap013.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap013.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap015.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap015.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap016.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap016.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap017.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap017.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap018.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap018.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap019.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap019.jpg)


MSD SCI igniton w/ MSD blaster coil & MSD spark plug wires- $300
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap001.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap001.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap037.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap037.jpg)


Competition Clutch 6 puck clutch (less than 200 miles on it)- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap095.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap095.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap020.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap020.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap027.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap027.jpg)



14lb Clutchmasters lightened flywheel (also less than 200 miles on it) w/ pressure plate- $250
(I'll do clutch and flywheel for $350) **SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_efc8d981.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efc8d981.jpg)


Neuspeed front upper strut bar- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap022.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap022.jpg)


DC Sports rear lower tie bar- $75 ***SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec024.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec024.jpg)


AEM Power Pully alternator pulley- $40 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium003.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium003.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium005.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium005.jpg)

MOMO Race steering wheel w/ Sparco steering wheel hub- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec007.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec007.jpg)


EL gas and water temp gauge- $25 **SOLD**

Wingswest RS front lip (needs some love)- $250 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture029.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture029.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture031.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture031.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture025.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture025.jpg)

WWRS side skirt (only one)- $50

JDM Black housing onepiece headlights (great condition)- $225 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap003.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap003.jpg)http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap005.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap005.jpg)


OEM Custom taillight (amber removed) RIGHT side only- $35 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap011.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap011.jpg)


Accord rear lip- $20 (the right side was cut a little too much by my exhaust shop... but if you want it its yours) **SOLD**


Polyurethane motor mount inserts NIB- $50

Radiator/fans- $150 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap023.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap023.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap024.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap024.jpg)


complete wiring harness (very clean)- $100 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap021.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap021.jpg)


Custom fiberglassed 2 gauge pillar (black)- $50 i found it to whoever was asking me about it...


As for the motor:

the h23 crank is balanced and in good shape- I'll take $200 for the crank, rods, and crank pulley
http://i18.photobucket.com/albums/b108/brittoknee/th_efc8e351.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efc8e351.jpg)


The H22 head has significant damage to intake valves and one exhaust valve seat but a highly qualified machinist said it's definitely fixable. If anyone's up for it they're welcome to it- $100

Water pump (brand freakin new)- $100

Any parts you may need from the block or head are also up for bid etc...

Manual tensioner (all parts)- $50


VTEC Valve Cover (purple)- $50 you can paint it!
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap036.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap036.jpg)

2 Chrome audiobahn 10' sub grill covers- $30
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium009.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium009.jpg)


This is the beginning to a long heartbreaking partout.... but it's the best of the best stuff for the 4th gen.

Ofcourse buyer pays any and all shipping...

Feel free to call me @ 678-789-9506, email me @ [email protected], or pm me here....

Thanks

[brittoknee]

bump

[jfman]

I'll give you 100 for the wheels.

John 678-231-8833

[PawnShopCEO]

I am rebuilding my prelude and have a CEL for the abs. does your abs work 100%?

[cactusEG]

damn good things ur selling !! GL

[OaTmeaL]

Damn... crappy to see another Luder going to part out

[Goinfasterthanu]

Euro R intake manifold (lightly ported)- $325 w/ custom plate for fuel rail

Britt pm me about this..... or call....

[GSRteg®]

Bump

[Goinfasterthanu]

bump for my new euro r....yay!

[MoonScryer]

Bump for a nice car. Buy her stuff.

[Sol-Badguy]

I hate to see this Lude go.

Bump!

[brittoknee]

:D aww you guys are too sweet!

Yes I'm very sad about this... but all GREAT/amazing/incredible/ and good things must come to an end.... :(

Jeremy call me and let me know when you wanna pick up the manifold... I should be free late this afternoon 5-6ish

[dakilla4ever]

Are those vtec rotors or si rotors? If they are vtec rotors I will buy all for of them off of you. Pm me and let me know. I hate to see this lude go like this.

[brittoknee]

heh... i know right...

theyre si/s rotors. But I'm selling the shell with them so unless that falls through they're spoken for. :)

[o_bomb]

nice stuff you got here!!

[brittoknee]

a lot of stuff has sold in the last week or so.... i just updated the list so check it out!

[integra82786]

what type of srpings and retainers are they, and will they fit in a b series integra?

[brittoknee]

what type of srpings and retainers are they, and will they fit in a b series integra?


theyre JUN springs, retainers, and cams


I doubt they'll fit anything other than an h22

[dakilla4ever]

Let me get those turn signals. I just got another prelude and it doesn't have any. I'll pm you my number so I can come get them sometime this week while I'm on vacation.

[ultm8mind]

what you have left?

[brittoknee]

what you have left?

the original post is current... i update it after shit sells...

[Dirty Octopus™]

this chicks a MILF that needs these parts gone... :D

[brittoknee]

lol... true dat

[PNTYDRPR2]

I'll give ya $30 for motor mount inserts

[brittoknee]

deal 678-789-9506

[brittoknee]

just picked up the motor....

anyone that was interested in the h22 head, balanced h23 crankshaft, h23 block, or anything else pm me.....

sorry it took so long :)