Soloboy
07-02-2005, 01:12 AM
Ok, First off this is a 95 Acura Integra LS.....
Silver in Color! No Power Steering( but if wanted I can get it for you)
Chassis: 156K
I have A/C from a 98 GSR(Will be Installed before Sold!)
Motor:JDM B18B w/approximately 45K from JAPAN, Purchased from NADAUTO....
OIL Changed recently and every 3000miles!!!
Motor is mated to a GSR Tranny Great condition meaning No Grinds or Slippage...
***Before Sold*** I will Install brand new Enjo Motor Mounts!!! With Proof of purchase and labor by H&M Motorsports!
Minor Engine Mods:Clutchmaster Stage2 clutch and pressure plate less than 5k....
AEM CAI cut into two pieces to Make into a Short Ram or extended....
DC sports 4-1 Headers
AEM Underpulley Kit (Brand New Still In Box)(can be installed!)
Skunk2 IM (Brand New In Box)(Can also be Installed!)
B&M Fuel Pressure regulator w/Gauge...(currently set at stock)
Interior: Full 97 GSR Mint Cloth interior w/ Newly installed Carpet.... W/ Extra set of Rear Matching Seats.... It also has GSR Door Panel's with OEM Tweeters... I also will throw in another Set of Good condition GSR Door panels...! LEATHER Armrest...
Exterior:Brand New OEM 2001 Front and Rear Bumper's Straight from ACURA (still Unpainted) MINT!!!!
Brand New Amber Corners! (Not Installed)
OEM Brand Spankin New PAIR of Headlights, CRYSTAL CLEAR... MINT... Still Have Box!
OEM Type R LIP in BLACK (Not Installed)
OEM TYPE R Wing in Black...(Not Installed)
3 minor Dings, can be pulled out with Dent puller!!! Nothing Serious!
Wheels:16" Rota Slipstreams MINT CONDITION, with 95% Sumitumo Tires....205-55-16's....Still have the nipples on the sidewalls
Suspension:Full Type R Shocks on all Four Corner's with Rear ITR Lower Control Arm's, dropped on No Name Coilovers... Not Bouncy to me in My Opinion!! Will Come with Tokico Illuminas if Interested, But lost knob... and I have extra Set of #1 Coilovers!...
I have Skunk2 Rear upper Strut Bar....(Not Installed)
I also have Comptech Rear Lower Tie Bar, w/ Type R Sway bar w/endlinks....
I have in Box Energy Suspension Polyurethane Suspension Bushings...(full Kit not Installed)
No name Front Upper Strut bar....
Brakes: Gsr Slotted rotors in Front (Not Installed,But will be before SOLD!)....W/Extra Front GSR Suspension system(including, Knuckles, stock rotors,Calipers, and other miscellaneous stuff) New Brake pads...
Audio:Alpine Type S 6.5 Door Speakers, and Kenwood 6X9's in the Rear (custom fitted) Will come with Some extra 5" Polk Audio speakers, and 5 1/4 Kenwood excelon speakers....
Alpine CDA-9811 CD Mp3/Wma/Cd-r Headunit, with sub outputs, Comes with carrying case, and REMOTE.....
It could come with JDM ITR 5-lug full suspension with OEM CTR Rear Camber Kits, and Brand new Front Upper Control Arms and Bushings...I had to Purchase 2 New USDM ITR front HUB's and 2 new Wheel bearings that is compatible with my USDM 32mm Axles.... Thanks to H&M Motorsports for pressing them onto my Spindle..The Rear Brake Lines arent cut, and the E-Brake lines werent cut, So everything should be bolted right up.... Everything is GREAT Condition, Rotors just need to be Turned a little, and they are Cross Drilled and Slotted Rotors.... Brand new Brake Pads... The only thing Im missing it the 5x114.3 Rims....
(add $1000 for this 5-lug conversion!)CRV Steelies without tires will be included!
I also have 2 Good Conditioned Doors LEFT and RIGHT, and a REAR Trunk That will be Included.... and Other Miscellaneous Body and Interior parts I have left over...
FLAWS:The Only Flaw's is the Mismatched OEM Unpainted Bumpers...If the Car was painted it would kinda look like this without the Red rims...!
Silver in Color! No Power Steering( but if wanted I can get it for you)
Chassis: 156K
I have A/C from a 98 GSR(Will be Installed before Sold!)
Motor:JDM B18B w/approximately 45K from JAPAN, Purchased from NADAUTO....
OIL Changed recently and every 3000miles!!!
Motor is mated to a GSR Tranny Great condition meaning No Grinds or Slippage...
***Before Sold*** I will Install brand new Enjo Motor Mounts!!! With Proof of purchase and labor by H&M Motorsports!
Minor Engine Mods:Clutchmaster Stage2 clutch and pressure plate less than 5k....
AEM CAI cut into two pieces to Make into a Short Ram or extended....
DC sports 4-1 Headers
AEM Underpulley Kit (Brand New Still In Box)(can be installed!)
Skunk2 IM (Brand New In Box)(Can also be Installed!)
B&M Fuel Pressure regulator w/Gauge...(currently set at stock)
Interior: Full 97 GSR Mint Cloth interior w/ Newly installed Carpet.... W/ Extra set of Rear Matching Seats.... It also has GSR Door Panel's with OEM Tweeters... I also will throw in another Set of Good condition GSR Door panels...! LEATHER Armrest...
Exterior:Brand New OEM 2001 Front and Rear Bumper's Straight from ACURA (still Unpainted) MINT!!!!
Brand New Amber Corners! (Not Installed)
OEM Brand Spankin New PAIR of Headlights, CRYSTAL CLEAR... MINT... Still Have Box!
OEM Type R LIP in BLACK (Not Installed)
OEM TYPE R Wing in Black...(Not Installed)
3 minor Dings, can be pulled out with Dent puller!!! Nothing Serious!
Wheels:16" Rota Slipstreams MINT CONDITION, with 95% Sumitumo Tires....205-55-16's....Still have the nipples on the sidewalls
Suspension:Full Type R Shocks on all Four Corner's with Rear ITR Lower Control Arm's, dropped on No Name Coilovers... Not Bouncy to me in My Opinion!! Will Come with Tokico Illuminas if Interested, But lost knob... and I have extra Set of #1 Coilovers!...
I have Skunk2 Rear upper Strut Bar....(Not Installed)
I also have Comptech Rear Lower Tie Bar, w/ Type R Sway bar w/endlinks....
I have in Box Energy Suspension Polyurethane Suspension Bushings...(full Kit not Installed)
No name Front Upper Strut bar....
Brakes: Gsr Slotted rotors in Front (Not Installed,But will be before SOLD!)....W/Extra Front GSR Suspension system(including, Knuckles, stock rotors,Calipers, and other miscellaneous stuff) New Brake pads...
Audio:Alpine Type S 6.5 Door Speakers, and Kenwood 6X9's in the Rear (custom fitted) Will come with Some extra 5" Polk Audio speakers, and 5 1/4 Kenwood excelon speakers....
Alpine CDA-9811 CD Mp3/Wma/Cd-r Headunit, with sub outputs, Comes with carrying case, and REMOTE.....
It could come with JDM ITR 5-lug full suspension with OEM CTR Rear Camber Kits, and Brand new Front Upper Control Arms and Bushings...I had to Purchase 2 New USDM ITR front HUB's and 2 new Wheel bearings that is compatible with my USDM 32mm Axles.... Thanks to H&M Motorsports for pressing them onto my Spindle..The Rear Brake Lines arent cut, and the E-Brake lines werent cut, So everything should be bolted right up.... Everything is GREAT Condition, Rotors just need to be Turned a little, and they are Cross Drilled and Slotted Rotors.... Brand new Brake Pads... The only thing Im missing it the 5x114.3 Rims....
(add $1000 for this 5-lug conversion!)CRV Steelies without tires will be included!
I also have 2 Good Conditioned Doors LEFT and RIGHT, and a REAR Trunk That will be Included.... and Other Miscellaneous Body and Interior parts I have left over...
FLAWS:The Only Flaw's is the Mismatched OEM Unpainted Bumpers...If the Car was painted it would kinda look like this without the Red rims...!