View Full Version : Power Mods Opinion: Best aftermarket B16 Manifold? AEBS, Skunk2, Blox?
b17a1db2
04-24-2007, 09:44 PM
I'm wanting another aftermarket intake manifold. I've had an AEBS, and I liked it a good bit. And I've had a Skunk2 on my GSR motor..Both seem very well. I've heard good things about AEBS. And S2, I know is real good..How about Blox? anyone have experience with them? I like their design, cause it's just like the P73 ITR Manifold, and the 1st Gen Skunk2 Design. I'd rather not get the current version of the Skunk2, but I will if the power gain is better? I can get the AEBS, and Blox for the same price, and the Skunk2 about $50 More. Let me know what you think, is the best for power gain? Thanks.
BABY J
04-25-2007, 09:39 AM
Edelbrock?
b17a1db2
04-25-2007, 01:08 PM
there probably good. but if i remember right. the manifold just looks awkward..and it's much more than i want to spend.
cactusEG
04-25-2007, 09:59 PM
skunk2 for sure ! ! !
Da_unknown
04-25-2007, 11:09 PM
AEBS.
sleepys4
04-26-2007, 03:20 AM
JG engineering FTW. * i don't even know what that means*
b17a1db2
04-26-2007, 04:04 PM
thanks for the input so far people. i appreciate it..any feedback as far as blox. ? I can get theirs for about $160 i think shipped. . or if anyone has the 1st gen skunk2, p/m me, if it's for sale..
Vteckidd
05-06-2007, 11:11 PM
depends on your setup.
for all motor, the AEBS or the SKunk2 one is fine. no real advantage over the other IMO. the BLOX is a srt8 copy of the Skunk2 with lesser quality. stay away from it.
JG Edelbrock is good for turbo an high hp NA applications
b17a1db2
05-09-2007, 08:39 PM
thanks. i appreciate it a lot. i think i will be buying an intake manifold pretty soon..
T34me
05-10-2007, 08:31 PM
skunk2 FTW
Mr2raceworks
07-12-2007, 11:43 PM
Edelbrock
bRiAnMcIvIcS
07-15-2007, 06:18 PM
dude go with the skunk2. when it comes to honda skunk2 knows whats up. thats all they mess with.
TallGuy
07-15-2007, 06:43 PM
skunk2 all the way.. get the new pro2 its showing some great numbers..
chsdog55
07-15-2007, 07:19 PM
I know its not on ur list but have u looked at the BBK SSI? Its getting good reviews and i have one on my Turbod GSR and i love it. It performs just as well as the Victor X and is a little cheaper and i think its looks alot better than the other ones.
tippatone
07-17-2007, 12:39 AM
Skunk 2 is the popular/good choice, but if you want to run an hard N/A setup you should the Victor X edelbrock mani
b17a1db2
07-17-2007, 05:15 PM
thanks. I ended up w/ the AEBS when i made this thread, that went on my 92' gsr.. Now in my del sol. I've got the Skunk2.
jerzey908
07-17-2007, 07:48 PM
itb's
IntegraXTR
07-18-2007, 11:46 AM
AEBS.
:werd: these have been proven
allmotoronly
08-26-2007, 09:48 PM
I would go with the Skunk2 or AEBS. you probably dont need the JG/EDELBROCK unless you are making a lot of power. It has shorter runners.
1SOL2NV
08-29-2007, 05:03 PM
i agree with this one guy .. JGE FTMFW!!!!
Andy_013
08-29-2007, 08:52 PM
Skunk 2
speedminded
08-29-2007, 09:43 PM
Endyn - Energy Dynamics/Advanced Induction Research :ninja:
http://advancedinductionresearch.com/photo_gallery.htm
http://www.theoldone.com/components/intake_manifold/cfintakemanifold2.jpg
http://www.theoldone.com/components/Endyn_Fabed_Manifolds/endyn_fabricated_manifolds.htm
http://www.theoldone.com/components/Endyn_Fabed_Manifolds/WBSFabTB2.jpg
1SOL2NV
08-29-2007, 11:37 PM
lol this thread was brought back from the dead lol ....
JDMjoe
09-02-2007, 10:21 PM
itb's
:goodjob:
patrick4588
09-04-2007, 12:26 PM
Skunk 2 is the popular/good choice, but if you want to run an hard N/A setup you should the Victor X edelbrock mani
um no. the victor x sucks the fat one on NA motors. the performer x is the manifold you want. there is a thread on honda tech where they tested the skunk2, blox, aebs, victor x, and performer x on a type r. the performer x made the most power across the board. the victor x actually lost hp.
patrick4588
09-04-2007, 12:27 PM
for turbocharged cars, the BBK IM or the Edelbrock Victor X owns. for NA, the Edelbrock performer x is best.
GaGen2Teg
09-15-2007, 06:15 AM
SKUNK2!!!
ej1252
09-15-2007, 11:59 AM
just spend a lilttle more and get edelbrock performance x
KPowerEP3
09-15-2007, 01:33 PM
OEM Type- R port/gasket matched.
RISKYB
09-18-2007, 10:01 PM
skunk2 all the way
k20siboii
09-30-2007, 07:59 PM
skunk2 best thing i bought
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.