PDA

View Full Version : 1993 SC300 MAF Sensor Help


dowhatido
04-22-2007, 01:09 PM
ok tryin to put intake on, i want to know if there is anyway to by-pass the mass air senor, and get rid of the entire thing. my goal is to do a quick intake mod for the race this weekend. the way it's on right now is still creating a lot of resistance and has not improved to it fullest
Dr Tweak
04-23-2007, 04:48 PM
No. And the MAF is not a restriction on that setup.

-Doc
00CelicaGT
04-23-2007, 11:49 PM
well if u do take it off the car will idle at red line which is not good. it also may not start not sure though never tryed to start the car without it on.
Sport1.3
04-27-2007, 10:19 AM
No. And the MAF is not a restriction on that setup.

-Doc

exactly, you'll actually make more power with it
gbruce
12-06-2007, 12:40 AM
Um, if you take the MAF off it will pull a code and go into limp mode, also it will **** with emissions, which we all know how GA feels about them. Your car may not light the CEL, but if you check for codes you should find some, anyone know why Toyota made a hierarchy of codes, some flash the CEL, other illuminate it, while other just sit silently until you notice one day that your car is idling at 1400 RPM?