View Full Version : Turbo Stuff and Wheels
crhatchzc
04-21-2007, 10:00 AM
All pictures of turbo stuff and wheels are in the link below. I was having problems posting all these pictures on thread. They are on pages 1 and 2.
bseries Bloxs cast iron turbo manifold - $150
T3 RB26 Turbo - $75 obo
FMI - $20
B Series 255 Walaboro Fuel Pump - $75
15 inch slotted rotters - $75 obo
LS Mesh Wheels - $200 + Steelies (Tires have about 30% tread) SOLD!!!!
02 Nissan SpecV Wheels and Tires - $250 (I am selling for a buddy; have about 30% tread)
New Stuff
stage 3 6puck clutch with pressure plate f1 racing - $80 (clutch and pressure plate has about 7000 miles on it about 97% life)
resufaced fly wheel - $40 (fly wheel has about 7000 miles on it)
You can contact me thru pms or call me at 678-897-8750. Ask for Drew.
http://groups.msn.com/boosteddelsol/shoebox.msnw?Page=1
JDM-95-Hatch
04-21-2007, 11:31 AM
what size is the wastegate flange? and is it for a d series or b series?
crhatchzc
04-21-2007, 11:50 AM
what size is the wastegate flange? and is it for a d series or b series?
im not sure on the wastegate size flange and its for a bseries
Sol-Badguy
04-21-2007, 12:16 PM
PM'd on the wheels.
crhatchzc
04-21-2007, 12:55 PM
PM'd on the wheels.
pm'd back just let me know something
azianhustla
04-21-2007, 01:02 PM
are those 2 Wastegate screws Stripped??/ and Broken?
JR VQ 30 de
04-21-2007, 01:22 PM
hey ill trade you for my wheels on my sig for your LS Mesh Wheels lmk
crhatchzc
04-21-2007, 01:23 PM
are those 2 Wastegate screws Stripped??/ and Broken?
no they are not this manifold is perfeclty fine
crhatchzc
04-21-2007, 01:24 PM
hey ill trade you for my wheels on my sig for your LS Mesh Wheels lmk
nah i cant do it im really just lookin for cash i need to pay some bills
bernard
04-21-2007, 01:49 PM
Hey im interested in the manifold. Can u get me some closer pics please? ANd the rotors, are those the aem ones, or which ones are those and are they from a teg?
crhatchzc
04-21-2007, 01:55 PM
Hey im interested in the manifold. Can u get me some closer pics please? ANd the rotors, are those the aem ones, or which ones are those and are they from a teg?
umm yeah i can get you a closer picture and the rotors i thank they are aem im not sure though man and they will a acura integra
just give me a alittle while on the pictures
crhatchzc
04-21-2007, 02:43 PM
bump
crhatchzc
04-22-2007, 01:06 AM
bump back to the top
crhatchzc
04-22-2007, 04:52 PM
I KNOW SOMEONE WANTS THIS STUFF BUMP
crhatchzc
04-23-2007, 01:18 PM
bump bump
matts13
04-23-2007, 07:02 PM
what where the rotor off of and what size are they width lug patter all that good stuff
The Green Monster
04-23-2007, 07:40 PM
lug pattern on those spec-v wheels?
bernard
04-23-2007, 08:36 PM
Just let me know when u got pics bro ok, and what size are those rotors please?
crhatchzc
04-24-2007, 04:07 AM
the rotors are 15 inch and they are 4x100 and im pullin the motor out of my del sol tomorrow so i will have pics of the clutch up and everything and the lug pattern on the spec-v wheels are 4x114.3
bernard
04-24-2007, 04:27 AM
Dam well can't use the rotors then my rims are 15. But hey im really interested in the manifold bro let me know asap please.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.