Log in

View Full Version : FS:JDM OBD1 95 H22A swap


nextelbuddy
04-14-2007, 08:24 PM
Seling for a good friend of mine.

asking 1500 for everything listed below. price is OBO

the rings went bad. motor still runs but smokes from the PCV hose thats how we know there is blow by. new set of rings and you are good to go.

this is a 95 JDM H22A swap. comes with 5 speed H22A tranny no grinds and a JDM P13 ECU and a spare OBDII to OBDI Jumper harness

the swap was purchased with the typical "its jdm and they only have about 30k miles" statement and the motor was only run for about 5000 miles since we have had it.


http://img.photobucket.com/albums/v310/nextelbuddy/pauls%20turbo%20kit/P4140072.jpg
http://img.photobucket.com/albums/v310/nextelbuddy/pauls%20turbo%20kit/P4140073.jpg
http://img.photobucket.com/albums/v310/nextelbuddy/pauls%20turbo%20kit/P4140074.jpg
http://img.photobucket.com/albums/v310/nextelbuddy/pauls%20turbo%20kit/P4140075.jpg
http://img.photobucket.com/albums/v310/nextelbuddy/pauls%20turbo%20kit/P4140076.jpg
http://img.photobucket.com/albums/v310/nextelbuddy/pauls%20turbo%20kit/P4140077.jpg
K24cb7coupe
04-15-2007, 05:17 PM
2k?
PawnShopCEO
04-15-2007, 06:17 PM
you gotta be kidding.. the motor has to be completely torn down and rebuilt to replace the rings. I say this motor is worth around 1200 with the tranny and ecu
nextelbuddy
04-16-2007, 01:34 AM
you gotta be kidding.. the motor has to be completely torn down and rebuilt to replace the rings. I say this motor is worth around 1200 with the tranny and ecu


price is OBO

also for a skilled DIY this is not even but a few hours work.

the head is flawless and the rest of the shortblock is in great shape. its not like their is a hole in the block with bent mangled rods.
MoonScryer
04-16-2007, 07:54 AM
Price is a bit high, and I doubt you would accept my OBO. Bump for a rebuildable option.
n8dzlespekv
04-16-2007, 11:47 AM
I think its worth 1500
nextelbuddy
04-18-2007, 04:15 PM
I think its worth 1500


i can do 1700 for everything.
lsxtreme
04-18-2007, 05:19 PM
still is already swapped into a hatch or still in prelude shell?
nextelbuddy
04-18-2007, 08:42 PM
still is already swapped into a hatch or still in prelude shell?



its actually in a 94 honda accord currently
mikebluS2G
04-18-2007, 08:53 PM
sick m3!.....so free bummp
nextelbuddy
04-22-2007, 10:32 PM
bump
WhiteAccord
04-22-2007, 10:36 PM
hmmmm 94 accord...
i wonder if it would fit in my 00 accord without mods...
an0therh22
04-23-2007, 01:03 AM
hmmmm 94 accord...
i wonder if it would fit in my 00 accord without mods...let me know if u figure that out. i know someone with an h22 01 but i didnt ask how hard it was.

bump for a bad ass motor. F - k series
manilikecars
04-23-2007, 03:15 PM
have you checked to make sure the cylinder walls are not scorched or you just assuming that they are not? yeah it is alittle high you can find h22 swaps for 1000 bucks now. We bought one for 700.
o_bomb
04-29-2007, 02:32 PM
have you checked to make sure the cylinder walls are not scorched or you just assuming that they are not? yeah it is alittle high you can find h22 swaps for 1000 bucks now. We bought one for 700.


A whole swap for 700??? let me know I will buy 2!!:goodjob:
gotrice?
10-23-2007, 10:27 PM
how much will u sell the trans for and the ecu??? i have a h22a swap in my ek and im lookin for a trans, and all the things to convert it to obd2