anyone know about d16 dohc???

[corey30349]

i seen a d16 dual over head so i was tryin to see if anyone heard about it and knows wat the numbers are lookin like

[THEONE]

the zc engine is pretty much the same its a 1.6l dohc. if its a zc then 125 or 135 hp stock i made 208 with mine and 7psi.
if your lookin at the old integra 1.6l dohc run like hell. now you can take the head off of one of those and swap it on a 1.6l block.if your bored.

[Elbow]

yep D16A1, perfect swap for the old 1st gen CRX's and 3rd gen Civics

[1SOL2NV]

dohc d16= american made Zc .... basically lol

[corey30349]

dohc d16= american made Zc .... basically lolok so what would i have to do to put it in a ef

[Elbow]

I think D16A1's are a bitch to put in EF's thats just what I have heard.

[dorin48]

A ZC is a direct bolt in for an EF. Only thing is if the swap vehicle was a 1.5 originally you will have to run wires and the little control box for fuel injection that comes on 1.6 equipped vehicles. A d16a1 is a "d" series and dohc and 1.6l but they are essentially different animals. The mounts are different and the power out put is much lower in the d16a1.

If your looking for one go with either a ZC (jdm) or a d16a8 (edm)

[speedminded]

116hp stock on the later model 1st gen integra's.