PDA

View Full Version : Look at what I got at work today!


TwinyTwin
06-27-2005, 03:13 PM
After a month and a half of my car being down I finally got my turbo in today. Hopefully by the end of next week my car will be back on the streets just waiting for my ecu and chip.
drupason
06-27-2005, 03:16 PM
niice
Spyder
06-27-2005, 03:17 PM
kewl.
99SI
06-27-2005, 03:30 PM
That looks to be a pretty large turbo ya got there.
mocha latte cupcake
06-27-2005, 03:31 PM
awesome .70 A/R is gunna be hawt! VIDEO"s! VIDEO'S!
4dmin
06-27-2005, 03:36 PM
:werd:
TwinyTwin
06-27-2005, 03:42 PM
it will be going on this

http://forums.importatlanta.com/attachment.php?attachmentid=3032
Deaf Pimp
06-27-2005, 03:49 PM
Thats way too fuckin big... get a smaller turbo!!!
Spyder
06-27-2005, 03:53 PM
Thats way too fuckin big... get a smaller turbo!!!
:confused:
TwinyTwin
06-27-2005, 04:04 PM
Thats way too fuckin big... get a smaller turbo!!!


HAHAHA... then I would not be able to suck in small animals.
99SI
06-27-2005, 04:06 PM
What HP figures are you shooting for? What size turbo is that?
Spyder
06-27-2005, 04:06 PM
HAHAHA... then I would not be able to suck in small animals.

have you ever seen what happens to both the turbo and the animal when that happens? i know you were joking but its NASTY.
HiPSI
06-27-2005, 04:12 PM
awesome .70 A/R is gunna be hawt! VIDEO"s! VIDEO'S!


do you even know what it means?
TwinyTwin
06-27-2005, 04:12 PM
What HP figures are you shooting for? What size turbo is that?

I am looking for somewhere in the neighborhood of 600-700hp to the wheels. I would really like it to be a low 10 sec car. Right now the car with the stock turbo does 12.3@20psi with nitrous to help it get off the line. The turbo is a TE63-1.
HiPSI
06-27-2005, 04:16 PM
what size/trim is it actually? it's internally gated so it's not like a bigass T-series. i'd assume a T3/T04S maybe?
PhAtBoYMr2
06-27-2005, 04:22 PM
damn shootin for some major power there, Im guessing thats a hair faster than the miata :lmfao: :goodjob:
Spyder
06-27-2005, 04:23 PM
what size/trim is it actually? it's internally gated so it's not like a bigass T-series. i'd assume a T3/T04S maybe?

its a Thumper.


lol.
HiPSI
06-27-2005, 04:27 PM
yea i just noticed he posted right before me what it is ;)
HiPSI
06-27-2005, 04:30 PM
oh and i just installed a new snail too

http://www.photodump.com/direct/esanford/comparison1.jpg
99SI
06-27-2005, 04:30 PM
Should be fun, I figured it to be somewhere in the 600+ range. Did you do a full build on the engine as well or will that be on stock internals. I know that is a pretty tough block but I would think forged would be appropriate at those levels.
HiPSI
06-27-2005, 04:32 PM
Should be fun, I figured it to be somewhere in the 600+ range. Did you do a full build on the engine as well or will that be on stock internals. I know that is a pretty tough block but I would think forged would be appropriate at those levels.


stock rods/pistons in the GN motors are stout as well. i've seen well over 600hp on stock engines.
BufordŽ
06-27-2005, 04:37 PM
HAHAHA... then I would not be able to suck in small animals.

:lmfao:

I can't wait until that thing is running. But now you can start growing a mullett
mocha latte cupcake
06-27-2005, 04:38 PM
A/R Aspect Ratio..... thanks.....
TwinyTwin
06-27-2005, 04:39 PM
the motor has been rebuilt with stonger internals. as for the trans, that is gonna have to be replaced in a few weeks with a turbo 400 because that thing will not last long.

erin, what kind of numbers are you putting down with your new turbo?
99SI
06-27-2005, 04:40 PM
Are you still going to run nitrous to spool up?
TwinyTwin
06-27-2005, 04:44 PM
hopefully the 3600 stall will be enough out the hole. figure about 5psi off the line should do the trick.
Spyder
06-27-2005, 04:47 PM
hopefully the 3600 stall will be enough out the hole. figure about 5psi off the line should do the trick.

the GN that ran a 9.95 at commerce during tunafest was leaving on full boost after you heard it start to spool you could hear the external dump open.. music to my ears.
99SI
06-27-2005, 04:48 PM
I hear you. 3600 stall should have you lifting the wheels w/ no problem. Did yall ever get any info from your Bosses camaro? I hate it that it got stolen, was definately sweet.
BufordŽ
06-27-2005, 04:57 PM
I need a 3600 stall. That would be awesome.
TwinyTwin
06-27-2005, 05:09 PM
The camaro was actually spotted in alabama a few weeks ago on a open trailer. the guy who spotted it was a good freind of my bosses and did not know it was stolen. He described everything down to the custom full tank. The truck did not have a tag on the back of it but the trailer that was carrying the car had a tag but was no good and the cops could not get a ID on who owned it. When my boss found out they put out an APB and set up road blocks but never found the car. the only reason the guy did not follow him was because he had his family in the car and if there was an altercation he did not want anything to happen to them. so he just got the tag number and thought that would have done some good.

As of right now my boss is looking at a '70 nova and a '68 camaro. Right now his plans for it is a 506 engine hoping to make atleast 850-900 to the wheels. I will post up when he does get the new car.
Kristi
06-27-2005, 05:23 PM
hey you got a hairdryer, lol
Darling Nikki
06-27-2005, 06:50 PM
Wow...Twin actually made a thread. And about damn fucking time that turbo got here.